Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Universal AutofoundryBOM:539314 +2.89%52 EBITDA Margin % is 4.79% as of Jun. 2026, which is 48% below its 10-year median of 9.22. GuruFocus rates BOM:539314 with a GF Score™ of 52/100 and a GF Value™ of ₹92.08 (Possible Value Trap). The stock has 4 warning signs investors should review. Among 1,321 Vehicles & Parts companies, Universal Autofoundry ranks worse than 71.76% on this metric.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Universal Autofoundry EBITDA Margin % Related Terms
Universal Autofoundry EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Universal Autofoundry's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:539314 vs ORLY, AZO: EBITDA Margin % Comparison
For the Auto Parts subindustry, Universal Autofoundry's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Universal Autofoundry EBITDA Margin % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Universal Autofoundry's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Universal Autofoundry's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Universal Autofoundry (BOM:539314) has a EBITDA Margin % of 4.79% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Universal Autofoundry and its competitors. This is 48% below median its historical median of 9.22. Over the past decade, Universal Autofoundry's EBITDA Margin % has ranged from 3.77 to 13.02. According to the industry distribution chart, Universal Autofoundry ranks #948 out of 1321 companies in the Vehicles & Parts industry, placing it in the top 71.8%.
Is Universal Autofoundry's EBITDA Margin % too high?
Universal Autofoundry's current EBITDA Margin % of 4.79% is 48% below median its 10-year median of 9.22. Over the past 10 years, this metric has ranged from a low of 3.77 to a high of 13.02. The Vehicles & Parts industry median EBITDA Margin % is 9.07. Universal Autofoundry's value of 4.79% is 47.2% below this industry median. Based on the distribution chart, Universal Autofoundry ranks #948 out of 1321 companies in the Vehicles & Parts industry, which is below the industry midpoint. Overall, Universal Autofoundry has a GF Score™ of 52/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Universal Autofoundry's EBITDA Margin % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Universal Autofoundry ranks #948 out of 1321 companies for EBITDA Margin %. This places Universal Autofoundry in the lower half of its industry. The industry median EBITDA Margin % is 9.07. Universal Autofoundry's value of 4.79% is 47.2% below this benchmark. Historically, Universal Autofoundry's own EBITDA Margin % has ranged from 3.77 to 13.02 over the past decade. While the company's 10-year median is 9.22 vs. the industry median of 9.07, Universal Autofoundry has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Vehicles & Parts company?
The median EBITDA Margin % among Vehicles & Parts companies is 9.07, based on 1,321 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Universal Autofoundry's current EBITDA Margin % of 4.79% is 47.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Universal Autofoundry and its competitors. For the Vehicles & Parts industry, the median EBITDA Margin % is 9.07 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Universal Autofoundry's current EBITDA Margin % is 4.79%, which is 48% below median its own 10-year median of 9.22. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Universal Autofoundry stock overvalued right now?
Based on GuruFocus' analysis, Universal Autofoundry (BOM:539314) is currently considered Possible Value Trap. The stock's GF Value™ is ₹92.08, compared to a current price of ₹53.00 — trading 42.4% below its estimated fair value. The current EBITDA Margin % is 4.79%, which is 48% below median its 10-year median of 9.22 and 47.2% below the Vehicles & Parts industry median of 9.07. Universal Autofoundry's overall GF Score™ is 52/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Universal Autofoundry (BOM:539314), the current EBITDA Margin % is 4.79% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Universal Autofoundry (BOM:539314) Overvalued in 2026?
Based on GuruFocus' analysis, Universal Autofoundry stock appears to be undervalued.
The current stock price of ₹53.00 is trading 42.4% below its estimated GF Value™ of ₹92.08.
GuruFocus considers Universal Autofoundry to be Possible Value Trap.
Key valuation signals for BOM:539314:
EBITDA Margin %: 4.79% (48% below median its 10-year median of 9.22)
GF Value™: ₹92.08 vs. price of ₹53.00 (42.4% below fair value)
Industry Position: 47.2% below the Vehicles & Parts median (#948 of 1321)
No single metric tells the full story. See the BOM:539314 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Universal Autofoundry Ltd is engaged in the manufacturing of iron castings. The company manufactures castings components in grey iron and ductile iron for the automotive sector. The company supplies castings in machined and as-cast conditions with surface treatment as per requirements. In addition, it also offers products to various industries such as commercial vehicles, tractors, passenger cars, earthmovers, and construction. The company also offers components that include Suspension Brackets, Differential Housings, Hubs, Brake Drums, Flywheels, Adjuster Nuts, Pulleys, Dampers, and more, which are widely utilized in the commercial vehicle and engineering sectors.
52GF Score
Get the complete analysis for BOM:539314
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:539314 has been successfully added to your 
