Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Impro Precision IndustriesHKSE:01286 +3.48%77 EBITDA Margin % is 17.89% as of Jun. 2026, which is 30% below its 10-year median of 25.69. GuruFocus rates HKSE:01286 with a GF Score™ of 77/100 and a GF Value™ of HK$3.21 (Significantly Overvalued). The stock has 1 warning sign investors should review. Among 3,036 Industrial Products companies, Impro Precision Industries ranks better than 78.85% on this metric.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Impro Precision Industries EBITDA Margin % Related Terms
Impro Precision Industries EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
HKSE:01286 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Impro Precision Industries's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Impro Precision Industries EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Impro Precision Industries's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Impro Precision Industries's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Impro Precision Industries (HKSE:01286) has a EBITDA Margin % of 17.89% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Impro Precision Industries and its competitors. This is 30% below median its historical median of 25.69. Over the past decade, Impro Precision Industries' EBITDA Margin % has ranged from 10.55 to 30.94. According to the industry distribution chart, Impro Precision Industries ranks #642 out of 3036 companies in the Industrial Products industry, placing it in the top 21.1%.
Is Impro Precision Industries' EBITDA Margin % too high?
Impro Precision Industries' current EBITDA Margin % of 17.89% is 30% below median its 10-year median of 25.69. Over the past 10 years, this metric has ranged from a low of 10.55 to a high of 30.94. The Industrial Products industry median EBITDA Margin % is 9.52. Impro Precision Industries' value of 17.89% is 87.9% above this industry median. Based on the distribution chart, Impro Precision Industries ranks #642 out of 3036 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Impro Precision Industries has a GF Score™ of 77/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Impro Precision Industries' EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Impro Precision Industries ranks #642 out of 3036 companies for EBITDA Margin %. This places Impro Precision Industries in the top 21% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.52. Impro Precision Industries' value of 17.89% is 87.9% above this benchmark. Historically, Impro Precision Industries' own EBITDA Margin % has ranged from 10.55 to 30.94 over the past decade. While the company's 10-year median is 25.69 vs. the industry median of 9.52, Impro Precision Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.52, based on 3,036 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Impro Precision Industries's current EBITDA Margin % of 17.89% is 87.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Impro Precision Industries and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.52 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Impro Precision Industries's current EBITDA Margin % is 17.89%, which is 30% below median its own 10-year median of 25.69. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Impro Precision Industries stock overvalued right now?
Based on GuruFocus' analysis, Impro Precision Industries (HKSE:01286) is currently considered Significantly Overvalued. The stock's GF Value™ is HK$3.21, compared to a current price of HK$9.37 — trading 191.9% above its estimated fair value. The current EBITDA Margin % is 17.89%, which is 30% below median its 10-year median of 25.69 and 87.9% above the Industrial Products industry median of 9.52. Impro Precision Industries' overall GF Score™ is 77/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Impro Precision Industries (HKSE:01286), the current EBITDA Margin % is 17.89% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Impro Precision Industries (HKSE:01286) Overvalued in 2026?
Based on GuruFocus' analysis, Impro Precision Industries stock appears to be overvalued.
The current stock price of HK$9.37 is trading 191.9% above its estimated GF Value™ of HK$3.21.
GuruFocus considers Impro Precision Industries to be Significantly Overvalued.
Key valuation signals for HKSE:01286:
EBITDA Margin %: 17.89% (30% below median its 10-year median of 25.69)
GF Value™: HK$3.21 vs. price of HK$9.37 (191.9% above fair value)
Industry Position: 87.9% above the Industrial Products median (#642 of 3036)
No single metric tells the full story. See the HKSE:01286 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Impro Precision Industries Ltd is an investment holding company. It operates in four segments: Investment casting, Precision machining and others, Sand casting, and Surface Treatment. The products and services offered are widely applied to various end-markets, including passenger cars, commercial vehicles, high horsepower engines, hydraulic equipment, construction equipment, agricultural equipment, recreational boats and vehicles, aerospace, and medical. The company's geographical segments are the Americas, Europe, and Asia, of which key revenue is generated from the Americas.
77GF Score
Get the complete analysis for HKSE:01286
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
HKSE:01286 has been successfully added to your 
