Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Craftsman AutomationNSE:CRAFTSMAN -1.25%86 EBITDA Margin % is 16.76% as of Jun. 2026, which is 22% below its 10-year median of 21.45. GuruFocus rates NSE:CRAFTSMAN with a GF Score™ of 86/100 and a GF Value™ of ₹9,219.86 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 1,321 Vehicles & Parts companies, Craftsman Automation ranks better than 81% on this metric.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Craftsman Automation EBITDA Margin % Related Terms
Craftsman Automation EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Craftsman Automation's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:CRAFTSMAN vs ORLY, AZO: EBITDA Margin % Comparison
For the Auto Parts subindustry, Craftsman Automation's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Craftsman Automation EBITDA Margin % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Craftsman Automation's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Craftsman Automation's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Craftsman Automation (NSE:CRAFTSMAN) has a EBITDA Margin % of 16.76% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Craftsman Automation and its competitors. This is 22% below median its historical median of 21.45. Over the past decade, Craftsman Automation's EBITDA Margin % has ranged from 14.58 to 29.05. According to the industry distribution chart, Craftsman Automation ranks #251 out of 1321 companies in the Vehicles & Parts industry, placing it in the top 19%.
Is Craftsman Automation's EBITDA Margin % too high?
Craftsman Automation's current EBITDA Margin % of 16.76% is 22% below median its 10-year median of 21.45. Over the past 10 years, this metric has ranged from a low of 14.58 to a high of 29.05. The Vehicles & Parts industry median EBITDA Margin % is 9.07. Craftsman Automation's value of 16.76% is 84.8% above this industry median. Based on the distribution chart, Craftsman Automation ranks #251 out of 1321 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, Craftsman Automation has a GF Score™ of 86/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Craftsman Automation's EBITDA Margin % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Craftsman Automation ranks #251 out of 1321 companies for EBITDA Margin %. This places Craftsman Automation in the top 19% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.07. Craftsman Automation's value of 16.76% is 84.8% above this benchmark. Historically, Craftsman Automation's own EBITDA Margin % has ranged from 14.58 to 29.05 over the past decade. While the company's 10-year median is 21.45 vs. the industry median of 9.07, Craftsman Automation has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Vehicles & Parts company?
The median EBITDA Margin % among Vehicles & Parts companies is 9.07, based on 1,321 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Craftsman Automation's current EBITDA Margin % of 16.76% is 84.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Craftsman Automation and its competitors. For the Vehicles & Parts industry, the median EBITDA Margin % is 9.07 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Craftsman Automation's current EBITDA Margin % is 16.76%, which is 22% below median its own 10-year median of 21.45. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Craftsman Automation stock overvalued right now?
Based on GuruFocus' analysis, Craftsman Automation (NSE:CRAFTSMAN) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹9,219.86, compared to a current price of ₹10,380.00 — trading 12.6% above its estimated fair value. The current EBITDA Margin % is 16.76%, which is 22% below median its 10-year median of 21.45 and 84.8% above the Vehicles & Parts industry median of 9.07. Craftsman Automation's overall GF Score™ is 86/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Craftsman Automation (NSE:CRAFTSMAN), the current EBITDA Margin % is 16.76% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Craftsman Automation (NSE:CRAFTSMAN) Overvalued in 2026?
Based on GuruFocus' analysis, Craftsman Automation stock appears to be overvalued.
The current stock price of ₹10,380.00 is trading 12.6% above its estimated GF Value™ of ₹9,219.86.
GuruFocus considers Craftsman Automation to be Modestly Overvalued.
Key valuation signals for NSE:CRAFTSMAN:
EBITDA Margin %: 16.76% (22% below median its 10-year median of 21.45)
GF Value™: ₹9,219.86 vs. price of ₹10,380.00 (12.6% above fair value)
Industry Position: 84.8% above the Vehicles & Parts median (#251 of 1321)
No single metric tells the full story. See the NSE:CRAFTSMAN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Craftsman Automation Ltd is engaged in the business of manufacturing engineering components, sub-assemblies, products and rendering of contract manufacturing services to various industries. It has three segments Powertrain; Aluminium Products; and Industrial & Engineering. It generates majority of revenue from Aluminium Products which develops, manufactures, sells its goods and services consisting of aluminium products to the manufacturers of two wheelers, passenger vehicles and commercial vehicles and products for power transmission and other industrial usage. Its products are CYLINDER BLOCK, CYLINDER HEAD, CAMSHAFTS, TRANSMISSION HOUSINGS, BEARING CAP, DIFFERENTIAL CARRIER HOUSING, Powertrain Parts, Structural parts, E-Vehicle Parts, GEAR AND GEAR BOXES, MATERIAL HANDLING.
86GF Score
Get the complete analysis for NSE:CRAFTSMAN
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:CRAFTSMAN has been successfully added to your 
