Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Ramkrishna ForgingsNSE:RKFORGE +2.06%85 EBITDA Margin % is 18.19% as of Jun. 2026, which is 5% below its 10-year median of 19.21. GuruFocus rates NSE:RKFORGE with a GF Score™ of 85/100 and a GF Value™ of ₹837.36 (Modestly Undervalued). The stock has 8 warning signs investors should review. Among 3,036 Industrial Products companies, Ramkrishna Forgings ranks better than 73.62% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Ramkrishna Forgings's EBITDA for the
three
months ended in Jun. 2026 was ₹2,213 Mil. Ramkrishna Forgings's Revenue for the
three
months ended in Jun. 2026 was ₹12,167 Mil. Therefore, Ramkrishna Forgings's EBITDA margin for the quarter that ended in Jun. 2026 was 18.19%.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Ramkrishna Forgings EBITDA Margin % Related Terms
Ramkrishna Forgings EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Ramkrishna Forgings's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:RKFORGE vs CRS, ATI, MLI: EBITDA Margin % Comparison
For the Metal Fabrication subindustry, Ramkrishna Forgings's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ramkrishna Forgings EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Ramkrishna Forgings's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Ramkrishna Forgings's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Ramkrishna Forgings (NSE:RKFORGE) has a EBITDA Margin % of 18.19% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Ramkrishna Forgings and its competitors. This is near median its historical median of 19.21. Over the past decade, Ramkrishna Forgings' EBITDA Margin % has ranged from 14.47 to 23.91. According to the industry distribution chart, Ramkrishna Forgings ranks #801 out of 3036 companies in the Industrial Products industry, placing it in the top 26.4%.
Is Ramkrishna Forgings' EBITDA Margin % too high?
Ramkrishna Forgings' current EBITDA Margin % of 18.19% is near median its 10-year median of 19.21. Over the past 10 years, this metric has ranged from a low of 14.47 to a high of 23.91. The Industrial Products industry median EBITDA Margin % is 9.52. Ramkrishna Forgings' value of 18.19% is 91.1% above this industry median. Based on the distribution chart, Ramkrishna Forgings ranks #801 out of 3036 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Ramkrishna Forgings has a GF Score™ of 85/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Ramkrishna Forgings' EBITDA Margin % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Ramkrishna Forgings ranks #801 out of 3036 companies for EBITDA Margin %. This puts Ramkrishna Forgings in the upper half of its industry. The industry median EBITDA Margin % is 9.52. Ramkrishna Forgings' value of 18.19% is 91.1% above this benchmark. Historically, Ramkrishna Forgings' own EBITDA Margin % has ranged from 14.47 to 23.91 over the past decade. While the company's 10-year median is 19.21 vs. the industry median of 9.52, Ramkrishna Forgings has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.52, based on 3,036 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ramkrishna Forgings's current EBITDA Margin % of 18.19% is 91.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Ramkrishna Forgings and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.52 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ramkrishna Forgings's current EBITDA Margin % is 18.19%, which is near median its own 10-year median of 19.21. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ramkrishna Forgings stock overvalued right now?
Based on GuruFocus' analysis, Ramkrishna Forgings (NSE:RKFORGE) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹837.36, compared to a current price of ₹751.35 — trading 10.3% below its estimated fair value. The current EBITDA Margin % is 18.19%, which is near median its 10-year median of 19.21 and 91.1% above the Industrial Products industry median of 9.52. Ramkrishna Forgings' overall GF Score™ is 85/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Ramkrishna Forgings (NSE:RKFORGE), the current EBITDA Margin % is 18.19% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ramkrishna Forgings (NSE:RKFORGE) Overvalued in 2026?
Based on GuruFocus' analysis, Ramkrishna Forgings stock appears to be undervalued.
The current stock price of ₹751.35 is trading 10.3% below its estimated GF Value™ of ₹837.36.
GuruFocus considers Ramkrishna Forgings to be Modestly Undervalued.
Key valuation signals for NSE:RKFORGE:
EBITDA Margin %: 18.19% (near median its 10-year median of 19.21)
GF Value™: ₹837.36 vs. price of ₹751.35 (10.3% below fair value)
Industry Position: 91.1% above the Industrial Products median (#801 of 3036)
No single metric tells the full story. See the NSE:RKFORGE stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ramkrishna Forgings Ltd is an Indian-based company, that engages in the manufacture of forgings and production of metal products. Its product portfolio includes engine components, front and rear axle components, transmission components, crown wheels and bellcrank assemblies, and others. The company's forgings are used in various industries and sectors, including automotive, earth moving and mining, farm equipment, general engineering, railways, steel plants, and others. Geographically the company caters its services to both domestic and overseas markets.
85GF Score
Get the complete analysis for NSE:RKFORGE
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:RKFORGE has been successfully added to your 
