Rane (Madras)NSE:RML -1.01%61 EBITDA Margin % is 9.48% as of Mar. 2026, which is 18% above its 10-year median of 8.01. GuruFocus rates NSE:RML with a GF Score™ of 61/100 and a GF Value™ of ₹642.21 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 1,325 Vehicles & Parts companies, Rane (Madras) ranks better than 51.25% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Rane (Madras)'s EBITDA for the
three
months ended in Mar. 2026 was ₹994 Mil. Rane (Madras)'s Revenue for the
three
months ended in Mar. 2026 was ₹10,479 Mil. Therefore, Rane (Madras)'s EBITDA margin for the quarter that ended in Mar. 2026 was 9.48%.
Rane (Madras) (NSE:RML) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Rane (Madras) EBITDA Margin % Related Terms
Rane (Madras) EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Rane (Madras)'s EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Rane (Madras)'s EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Rane (Madras) EBITDA Margin % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Rane (Madras)'s EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Rane (Madras)'s EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Rane (Madras) (NSE:RML) has a EBITDA Margin % of 9.48% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Rane (Madras) and its competitors. This is 18% above median its historical median of 8.01. Over the past decade, Rane (Madras)'s EBITDA Margin % has ranged from 2.91 to 9.33. According to the industry distribution chart, Rane (Madras) ranks #646 out of 1325 companies in the Vehicles & Parts industry, placing it in the top 48.8%.
Is Rane (Madras)'s EBITDA Margin % too high?
Rane (Madras)'s current EBITDA Margin % of 9.48% is 18% above median its 10-year median of 8.01. Over the past 10 years, this metric has ranged from a low of 2.91 to a high of 9.33. The Vehicles & Parts industry median EBITDA Margin % is 8.93. Rane (Madras)'s value of 9.48% is 6.2% above this industry median. Based on the distribution chart, Rane (Madras) ranks #646 out of 1325 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, Rane (Madras) has a GF Score™ of 61/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Rane (Madras)'s EBITDA Margin % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Rane (Madras) ranks #646 out of 1325 companies for EBITDA Margin %. This puts Rane (Madras) in the upper half of its industry. The industry median EBITDA Margin % is 8.93. Rane (Madras)'s value of 9.48% is 6.2% above this benchmark. Historically, Rane (Madras)'s own EBITDA Margin % has ranged from 2.91 to 9.33 over the past decade. While the company's 10-year median is 8.01 vs. the industry median of 8.93, Rane (Madras) has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Vehicles & Parts company?
The median EBITDA Margin % among Vehicles & Parts companies is 8.93, based on 1,325 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Rane (Madras)'s current EBITDA Margin % of 9.48% is 6.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Rane (Madras) and its competitors. For the Vehicles & Parts industry, the median EBITDA Margin % is 8.93 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Rane (Madras)'s current EBITDA Margin % is 9.48%, which is 18% above median its own 10-year median of 8.01. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Rane (Madras) stock overvalued right now?
Based on GuruFocus' analysis, Rane (Madras) (NSE:RML) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹642.21, compared to a current price of ₹1,061.80 — trading 65.3% above its estimated fair value. The current EBITDA Margin % is 9.48%, which is 18% above median its 10-year median of 8.01 and 6.2% above the Vehicles & Parts industry median of 8.93. Rane (Madras)'s overall GF Score™ is 61/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Rane (Madras) (NSE:RML), the current EBITDA Margin % is 9.48% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Rane (Madras) (NSE:RML) Overvalued in 2026?
Based on GuruFocus' analysis, Rane (Madras) stock appears to be overvalued.
The current stock price of ₹1,061.80 is trading 65.3% above its estimated GF Value™ of ₹642.21.
GuruFocus considers Rane (Madras) to be Significantly Overvalued.
Key valuation signals for NSE:RML:
EBITDA Margin %: 9.48% (18% above median its 10-year median of 8.01)
GF Value™: ₹642.21 vs. price of ₹1,061.80 (65.3% above fair value)
Industry Position: 6.2% above the Vehicles & Parts median (#646 of 1325)
No single metric tells the full story. See the NSE:RML stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Rane (Madras) Ltd provides components for the transportation industry. The company is a manufacturer of steering and suspension linkages products, steering gear products and other articles of aluminum die casting products. It operates through two divisions: the Steering and Linkages division and the Light Metal Castings division. The company's steering and linkages division manufactures manual steering gears, hydrostatic steering systems, and steering and suspension linkage products. Its Light Metal Castings division manufactures low-porosity, high-quality aluminum die-castings such as steering housings and engine case covers. Geographically, the company derives key revenue within India.
61GF Score
Get the complete analysis for NSE:RML
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:RML has been successfully added to your 
