Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
ADO OptronicROCO:3516 +4.85%62 EBITDA Margin % is 12.53% as of Dec. 2025, which is 55% above its 10-year median of 8.07. GuruFocus rates ROCO:3516 with a GF Score™ of 62/100 and a GF Value™ of NT$18.29 (Significantly Overvalued). The stock has 10 warning signs investors should review. Among 431 Furnishings, Fixtures & Appliances companies, ADO Optronic ranks better than 67.98% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. ADO Optronic's EBITDA for the
three
months ended in Dec. 2025 was NT$45 Mil. ADO Optronic's Revenue for the
three
months ended in Dec. 2025 was NT$355 Mil. Therefore, ADO Optronic's EBITDA margin for the quarter that ended in Dec. 2025 was 12.53%.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
ADO Optronic EBITDA Margin % Related Terms
ADO Optronic EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for ADO Optronic's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:3516 vs SN, SGI, MHK: EBITDA Margin % Comparison
For the Furnishings, Fixtures & Appliances subindustry, ADO Optronic's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
ADO Optronic EBITDA Margin % vs Furnishings, Fixtures & Appliances Industry
For the Furnishings, Fixtures & Appliances industry and Consumer Cyclical sector, ADO Optronic's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where ADO Optronic's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ADO Optronic (ROCO:3516) has a EBITDA Margin % of 12.53% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on ADO Optronic and its competitors. This is 55% above median its historical median of 8.07. According to the industry distribution chart, ADO Optronic ranks #138 out of 431 companies in the Furnishings, Fixtures & Appliances industry, placing it in the top 32%.
Is ADO Optronic's EBITDA Margin % too high?
ADO Optronic's current EBITDA Margin % of 12.53% is 55% above median its 10-year median of 8.07. The Furnishings, Fixtures & Appliances industry median EBITDA Margin % is 7.25. ADO Optronic's value of 12.53% is 72.8% above this industry median. Based on the distribution chart, ADO Optronic ranks #138 out of 431 companies in the Furnishings, Fixtures & Appliances industry, which is above the industry midpoint. Overall, ADO Optronic has a GF Score™ of 62/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does ADO Optronic's EBITDA Margin % compare to SN and SGI?
According to the Furnishings, Fixtures & Appliances industry distribution chart, ADO Optronic ranks #138 out of 431 companies for EBITDA Margin %. This puts ADO Optronic in the upper half of its industry. The industry median EBITDA Margin % is 7.25. ADO Optronic's value of 12.53% is 72.8% above this benchmark. While the company's 10-year median is 8.07 vs. the industry median of 7.25, ADO Optronic has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Furnishings, Fixtures & Appliances company?
The median EBITDA Margin % among Furnishings, Fixtures & Appliances companies is 7.25, based on 431 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. ADO Optronic's current EBITDA Margin % of 12.53% is 72.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on ADO Optronic and its competitors. For the Furnishings, Fixtures & Appliances industry, the median EBITDA Margin % is 7.25 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. ADO Optronic's current EBITDA Margin % is 12.53%, which is 55% above median its own 10-year median of 8.07. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is ADO Optronic stock overvalued right now?
Based on GuruFocus' analysis, ADO Optronic (ROCO:3516) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$18.29, compared to a current price of NT$25.95 — trading 41.9% above its estimated fair value. The current EBITDA Margin % is 12.53%, which is 55% above median its 10-year median of 8.07 and 72.8% above the Furnishings, Fixtures & Appliances industry median of 7.25. ADO Optronic's overall GF Score™ is 62/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For ADO Optronic (ROCO:3516), the current EBITDA Margin % is 12.53% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is ADO Optronic (ROCO:3516) Overvalued in 2026?
Based on GuruFocus' analysis, ADO Optronic stock appears to be overvalued.
The current stock price of NT$25.95 is trading 41.9% above its estimated GF Value™ of NT$18.29.
GuruFocus considers ADO Optronic to be Significantly Overvalued.
Key valuation signals for ROCO:3516:
EBITDA Margin %: 12.53% (55% above median its 10-year median of 8.07)
GF Value™: NT$18.29 vs. price of NT$25.95 (41.9% above fair value)
Industry Position: 72.8% above the Furnishings, Fixtures & Appliances median (#138 of 431)
No single metric tells the full story. See the ROCO:3516 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
ADO Optronic Corp is a Taiwan based company engages in the processing, assembly, and distribution of commercial lighting, indoor and outdoor LED lighting, and plastic injection products.
62GF Score
Get the complete analysis for ROCO:3516
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:3516 has been successfully added to your 
