Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
TSC Auto ID TechnologyROCO:3611 86 EBITDA Margin % is 15.39% as of Jun. 2026, which is 28% below its 10-year median of 21.31. GuruFocus rates ROCO:3611 with a GF Score™ of 86/100 and a GF Value™ of NT$271.02 (Significantly Undervalued). The stock has 5 warning signs investors should review. Among 2,474 Hardware companies, TSC Auto ID Technology ranks better than 74.33% on this metric.
TSC Auto ID Technology (ROCO:3611) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
TSC Auto ID Technology EBITDA Margin % Related Terms
TSC Auto ID Technology EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for TSC Auto ID Technology's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:3611 vs DELL, ANET, SNDK: EBITDA Margin % Comparison
For the Computer Hardware subindustry, TSC Auto ID Technology's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
TSC Auto ID Technology EBITDA Margin % vs Hardware Industry
For the Hardware industry and Technology sector, TSC Auto ID Technology's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where TSC Auto ID Technology's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSC Auto ID Technology (ROCO:3611) has a EBITDA Margin % of 15.39% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on TSC Auto ID Technology and its competitors. This is 28% below median its historical median of 21.31. Over the past decade, TSC Auto ID Technology's EBITDA Margin % has ranged from 15.35 to 26.76. According to the industry distribution chart, TSC Auto ID Technology ranks #635 out of 2474 companies in the Hardware industry, placing it in the top 25.7%.
Is TSC Auto ID Technology's EBITDA Margin % too high?
TSC Auto ID Technology's current EBITDA Margin % of 15.39% is 28% below median its 10-year median of 21.31. Over the past 10 years, this metric has ranged from a low of 15.35 to a high of 26.76. The Hardware industry median EBITDA Margin % is 7.60. TSC Auto ID Technology's value of 15.39% is 102.6% above this industry median. Based on the distribution chart, TSC Auto ID Technology ranks #635 out of 2474 companies in the Hardware industry, which is above the industry midpoint. Overall, TSC Auto ID Technology has a GF Score™ of 86/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does TSC Auto ID Technology's EBITDA Margin % compare to DELL and ANET?
According to the Hardware industry distribution chart, TSC Auto ID Technology ranks #635 out of 2474 companies for EBITDA Margin %. This puts TSC Auto ID Technology in the upper half of its industry. The industry median EBITDA Margin % is 7.60. TSC Auto ID Technology's value of 15.39% is 102.6% above this benchmark. Historically, TSC Auto ID Technology's own EBITDA Margin % has ranged from 15.35 to 26.76 over the past decade. While the company's 10-year median is 21.31 vs. the industry median of 7.60, TSC Auto ID Technology has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Hardware company?
The median EBITDA Margin % among Hardware companies is 7.60, based on 2,474 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. TSC Auto ID Technology's current EBITDA Margin % of 15.39% is 102.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on TSC Auto ID Technology and its competitors. For the Hardware industry, the median EBITDA Margin % is 7.60 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. TSC Auto ID Technology's current EBITDA Margin % is 15.39%, which is 28% below median its own 10-year median of 21.31. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is TSC Auto ID Technology stock overvalued right now?
Based on GuruFocus' analysis, TSC Auto ID Technology (ROCO:3611) is currently considered Significantly Undervalued. The stock's GF Value™ is NT$271.02, compared to a current price of NT$185.50 — trading 31.6% below its estimated fair value. The current EBITDA Margin % is 15.39%, which is 28% below median its 10-year median of 21.31 and 102.6% above the Hardware industry median of 7.60. TSC Auto ID Technology's overall GF Score™ is 86/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For TSC Auto ID Technology (ROCO:3611), the current EBITDA Margin % is 15.39% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is TSC Auto ID Technology (ROCO:3611) Overvalued in 2026?
Based on GuruFocus' analysis, TSC Auto ID Technology stock appears to be undervalued.
The current stock price of NT$185.50 is trading 31.6% below its estimated GF Value™ of NT$271.02.
GuruFocus considers TSC Auto ID Technology to be Significantly Undervalued.
Key valuation signals for ROCO:3611:
EBITDA Margin %: 15.39% (28% below median its 10-year median of 21.31)
GF Value™: NT$271.02 vs. price of NT$185.50 (31.6% below fair value)
Industry Position: 102.6% above the Hardware median (#635 of 2474)
No single metric tells the full story. See the ROCO:3611 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
TSC Auto ID Technology Corp is a company in auto-identification systems/products manufacturing and services. Its product categories include Industrial Printers; Desktop Printers; Mobile Printers; Enterprise Printers; Print Engines and Modules; Barcode Inspection Printers; Color Label Printers; and others. The company's operating segments are; Segment A which generates the majority of the revenue, and sells barcode printers and relevant components, and Segment B sells labels and printer consumables and segment C Enterprise mobile computers. Geographically, the company derives its key revenue from America and the rest from China, Europe, Taiwan, and other parts of Asia.
86GF Score
Get the complete analysis for ROCO:3611
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:3611 has been successfully added to your 
