Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Kao Fong Machinery CoROCO:4510 -0.12%53 EBITDA Margin % is 4.08% as of Dec. 2025, which is 38% below its 10-year median of 6.53. GuruFocus rates ROCO:4510 with a GF Score™ of 53/100 and a GF Value™ of NT$30.75 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 3,031 Industrial Products companies, Kao Fong Machinery Co ranks worse than 80.63% on this metric.
Kao Fong Machinery Co (ROCO:4510) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Kao Fong Machinery Co EBITDA Margin % Related Terms
Kao Fong Machinery Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Kao Fong Machinery Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4510 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Kao Fong Machinery Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kao Fong Machinery Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kao Fong Machinery Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Kao Fong Machinery Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Kao Fong Machinery Co (ROCO:4510) has a EBITDA Margin % of 4.08% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Kao Fong Machinery Co and its competitors. This is 38% below median its historical median of 6.53. Over the past decade, Kao Fong Machinery Co's EBITDA Margin % has ranged from 0.34 to 15.12. According to the industry distribution chart, Kao Fong Machinery Co ranks #2444 out of 3031 companies in the Industrial Products industry, placing it in the top 80.6%.
Is Kao Fong Machinery Co's EBITDA Margin % too high?
Kao Fong Machinery Co's current EBITDA Margin % of 4.08% is 38% below median its 10-year median of 6.53. Over the past 10 years, this metric has ranged from a low of 0.34 to a high of 15.12. The Industrial Products industry median EBITDA Margin % is 9.42. Kao Fong Machinery Co's value of 4.08% is 56.7% below this industry median. Based on the distribution chart, Kao Fong Machinery Co ranks #2444 out of 3031 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Kao Fong Machinery Co has a GF Score™ of 53/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Kao Fong Machinery Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Kao Fong Machinery Co ranks #2444 out of 3031 companies for EBITDA Margin %. This places Kao Fong Machinery Co in the lower half of its industry. The industry median EBITDA Margin % is 9.42. Kao Fong Machinery Co's value of 4.08% is 56.7% below this benchmark. Historically, Kao Fong Machinery Co's own EBITDA Margin % has ranged from 0.34 to 15.12 over the past decade. While the company's 10-year median is 6.53 vs. the industry median of 9.42, Kao Fong Machinery Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.42, based on 3,031 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kao Fong Machinery Co's current EBITDA Margin % of 4.08% is 56.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Kao Fong Machinery Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.42 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kao Fong Machinery Co's current EBITDA Margin % is 4.08%, which is 38% below median its own 10-year median of 6.53. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kao Fong Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Kao Fong Machinery Co (ROCO:4510) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$30.75, compared to a current price of NT$41.75 — trading 35.8% above its estimated fair value. The current EBITDA Margin % is 4.08%, which is 38% below median its 10-year median of 6.53 and 56.7% below the Industrial Products industry median of 9.42. Kao Fong Machinery Co's overall GF Score™ is 53/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Kao Fong Machinery Co (ROCO:4510), the current EBITDA Margin % is 4.08% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kao Fong Machinery Co (ROCO:4510) Overvalued in 2026?
Based on GuruFocus' analysis, Kao Fong Machinery Co stock appears to be overvalued.
The current stock price of NT$41.75 is trading 35.8% above its estimated GF Value™ of NT$30.75.
GuruFocus considers Kao Fong Machinery Co to be Significantly Overvalued.
Key valuation signals for ROCO:4510:
EBITDA Margin %: 4.08% (38% below median its 10-year median of 6.53)
GF Value™: NT$30.75 vs. price of NT$41.75 (35.8% above fair value)
Industry Position: 56.7% below the Industrial Products median (#2444 of 3031)
No single metric tells the full story. See the ROCO:4510 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kao Fong Machinery Co Ltd is engaged in the manufacture and distribution of machine tools and machinery equipment in Taiwan. The products of the company consist of Double Column Machining Center, vertical machining centers, horizontal machining centers, numerical control milling machines, bridge machining centers, and other machinery.
53GF Score
Get the complete analysis for ROCO:4510
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4510 has been successfully added to your 
