Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Chenfull Precision CoROCO:6829 +0.19%87 EBITDA Margin % is 24.72% as of Dec. 2025, which is 7% below its 10-year median of 26.51. GuruFocus rates ROCO:6829 with a GF Score™ of 87/100 and a GF Value™ of NT$173.00 (Significantly Overvalued). The stock has 4 warning signs investors should review. Among 3,032 Industrial Products companies, Chenfull Precision Co ranks better than 89.05% on this metric.
Chenfull Precision Co (ROCO:6829) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Chenfull Precision Co EBITDA Margin % Related Terms
Chenfull Precision Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Chenfull Precision Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:6829 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Chenfull Precision Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chenfull Precision Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chenfull Precision Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Chenfull Precision Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chenfull Precision Co (ROCO:6829) has a EBITDA Margin % of 24.72% as of Dec. 2025. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Chenfull Precision Co and its competitors. This is near median its historical median of 26.51. Over the past decade, Chenfull Precision Co's EBITDA Margin % has ranged from 19.68 to 35.69. According to the industry distribution chart, Chenfull Precision Co ranks #332 out of 3032 companies in the Industrial Products industry, placing it in the top 10.9%.
Is Chenfull Precision Co's EBITDA Margin % too high?
Chenfull Precision Co's current EBITDA Margin % of 24.72% is near median its 10-year median of 26.51. Over the past 10 years, this metric has ranged from a low of 19.68 to a high of 35.69. The Industrial Products industry median EBITDA Margin % is 9.42. Chenfull Precision Co's value of 24.72% is 162.4% above this industry median. Based on the distribution chart, Chenfull Precision Co ranks #332 out of 3032 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Chenfull Precision Co has a GF Score™ of 87/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Chenfull Precision Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chenfull Precision Co ranks #332 out of 3032 companies for EBITDA Margin %. This places Chenfull Precision Co in the top 11% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.42. Chenfull Precision Co's value of 24.72% is 162.4% above this benchmark. Historically, Chenfull Precision Co's own EBITDA Margin % has ranged from 19.68 to 35.69 over the past decade. While the company's 10-year median is 26.51 vs. the industry median of 9.42, Chenfull Precision Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.42, based on 3,032 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chenfull Precision Co's current EBITDA Margin % of 24.72% is 162.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Chenfull Precision Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.42 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chenfull Precision Co's current EBITDA Margin % is 24.72%, which is near median its own 10-year median of 26.51. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chenfull Precision Co stock overvalued right now?
Based on GuruFocus' analysis, Chenfull Precision Co (ROCO:6829) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$173.00, compared to a current price of NT$257.00 — trading 48.6% above its estimated fair value. The current EBITDA Margin % is 24.72%, which is near median its 10-year median of 26.51 and 162.4% above the Industrial Products industry median of 9.42. Chenfull Precision Co's overall GF Score™ is 87/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Chenfull Precision Co (ROCO:6829), the current EBITDA Margin % is 24.72% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chenfull Precision Co (ROCO:6829) Overvalued in 2026?
Based on GuruFocus' analysis, Chenfull Precision Co stock appears to be overvalued.
The current stock price of NT$257.00 is trading 48.6% above its estimated GF Value™ of NT$173.00.
GuruFocus considers Chenfull Precision Co to be Significantly Overvalued.
Key valuation signals for ROCO:6829:
EBITDA Margin %: 24.72% (near median its 10-year median of 26.51)
GF Value™: NT$173.00 vs. price of NT$257.00 (48.6% above fair value)
Industry Position: 162.4% above the Industrial Products median (#332 of 3032)
No single metric tells the full story. See the ROCO:6829 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chenfull Precision Co Ltd is engaged in manufacturing, processing, and trading of precision molds, as well as the processing, manufacturing, and trading of various aerospace materials. It is producing and manufacturing structure parts and engine cases for International Civil Aviation Industry, and critical parts and components for Optoelectronic and Semiconductor Equipment Industry.
87GF Score
Get the complete analysis for ROCO:6829
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6829 has been successfully added to your 
