Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Chieftek Precision CoTPE:1597 59 EBITDA Margin % is 32.24% as of Jun. 2026, which is 25% above its 10-year median of 25.78. GuruFocus rates TPE:1597 with a GF Score™ of 59/100 and a GF Value™ of NT$109.89 (Modestly Overvalued). The stock has 3 warning signs investors should review. Among 3,041 Industrial Products companies, Chieftek Precision Co ranks better than 92.8% on this metric.
Chieftek Precision Co (TPE:1597) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Chieftek Precision Co EBITDA Margin % Related Terms
Chieftek Precision Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Chieftek Precision Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electrical Equipment & Parts subindustry, Chieftek Precision Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chieftek Precision Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chieftek Precision Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Chieftek Precision Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chieftek Precision Co (TPE:1597) has a EBITDA Margin % of 32.24% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Chieftek Precision Co and its competitors. This is 25% above median its historical median of 25.78. Over the past decade, Chieftek Precision Co's EBITDA Margin % has ranged from 20.42 to 34.27. According to the industry distribution chart, Chieftek Precision Co ranks #219 out of 3041 companies in the Industrial Products industry, placing it in the top 7.2%.
Is Chieftek Precision Co's EBITDA Margin % too high?
Chieftek Precision Co's current EBITDA Margin % of 32.24% is 25% above median its 10-year median of 25.78. Over the past 10 years, this metric has ranged from a low of 20.42 to a high of 34.27. The Industrial Products industry median EBITDA Margin % is 9.65. Chieftek Precision Co's value of 32.24% is 234.1% above this industry median. Based on the distribution chart, Chieftek Precision Co ranks #219 out of 3041 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Chieftek Precision Co has a GF Score™ of 59/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Chieftek Precision Co's EBITDA Margin % compare to VRT and BE?
According to the Industrial Products industry distribution chart, Chieftek Precision Co ranks #219 out of 3041 companies for EBITDA Margin %. This places Chieftek Precision Co in the top 7% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.65. Chieftek Precision Co's value of 32.24% is 234.1% above this benchmark. Historically, Chieftek Precision Co's own EBITDA Margin % has ranged from 20.42 to 34.27 over the past decade. While the company's 10-year median is 25.78 vs. the industry median of 9.65, Chieftek Precision Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.65, based on 3,041 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chieftek Precision Co's current EBITDA Margin % of 32.24% is 234.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Chieftek Precision Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.65 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chieftek Precision Co's current EBITDA Margin % is 32.24%, which is 25% above median its own 10-year median of 25.78. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chieftek Precision Co stock overvalued right now?
Based on GuruFocus' analysis, Chieftek Precision Co (TPE:1597) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$109.89, compared to a current price of NT$135.00 — trading 22.9% above its estimated fair value. The current EBITDA Margin % is 32.24%, which is 25% above median its 10-year median of 25.78 and 234.1% above the Industrial Products industry median of 9.65. Chieftek Precision Co's overall GF Score™ is 59/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Chieftek Precision Co (TPE:1597), the current EBITDA Margin % is 32.24% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chieftek Precision Co (TPE:1597) Overvalued in 2026?
Based on GuruFocus' analysis, Chieftek Precision Co stock appears to be overvalued.
The current stock price of NT$135.00 is trading 22.9% above its estimated GF Value™ of NT$109.89.
GuruFocus considers Chieftek Precision Co to be Modestly Overvalued.
Key valuation signals for TPE:1597:
EBITDA Margin %: 32.24% (25% above median its 10-year median of 25.78)
GF Value™: NT$109.89 vs. price of NT$135.00 (22.9% above fair value)
Industry Position: 234.1% above the Industrial Products median (#219 of 3041)
No single metric tells the full story. See the TPE:1597 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chieftek Precision Co Ltd engages in the manufacture and sale of the ball and roller bearings. The Company engages in the research, development, manufacture and sales of miniature linear guides, miniature ball screws, miniature linear modules, electro-optics equipment and semiconductor process equipment. The company is involved in the manufacture of miniature linear motion components. Its products include Standard 4-Row Ball Bearing Linear Guide, Wide 4-Row Ball Bearing Linear Guide, Miniature Linear Guide, ST Miniature Stroke Slide Series, and others. Geographically the company operates in China, Germany, the USA, Taiwan, and other countries, out of which Germany derives the maximum revenue.
59GF Score
Get the complete analysis for TPE:1597
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1597 has been successfully added to your 
