Shin Zu Shing CoTPE:3376 -2.99%88 EBITDA Margin % is 8.19% as of Mar. 2026, which is 60% below its 10-year median of 20.67. GuruFocus rates TPE:3376 with a GF Score™ of 88/100 and a GF Value™ of NT$214.24 (Fairly Valued). The stock has 5 warning signs investors should review. Among 3,033 Industrial Products companies, Shin Zu Shing Co ranks worse than 53.94% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Shin Zu Shing Co's EBITDA for the
three
months ended in Mar. 2026 was NT$193 Mil. Shin Zu Shing Co's Revenue for the
three
months ended in Mar. 2026 was NT$2,353 Mil. Therefore, Shin Zu Shing Co's EBITDA margin for the quarter that ended in Mar. 2026 was 8.19%.
Shin Zu Shing Co (TPE:3376) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Shin Zu Shing Co EBITDA Margin % Related Terms
Shin Zu Shing Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Shin Zu Shing Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:3376 vs ATI, CRS, MLI: EBITDA Margin % Comparison
For the Metal Fabrication subindustry, Shin Zu Shing Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shin Zu Shing Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shin Zu Shing Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Shin Zu Shing Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shin Zu Shing Co (TPE:3376) has a EBITDA Margin % of 8.19% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Shin Zu Shing Co and its competitors. This is 60% below median its historical median of 20.67. Over the past decade, Shin Zu Shing Co's EBITDA Margin % has ranged from 8.37 to 26.03. According to the industry distribution chart, Shin Zu Shing Co ranks #1636 out of 3033 companies in the Industrial Products industry, placing it in the top 53.9%.
Is Shin Zu Shing Co's EBITDA Margin % too high?
Shin Zu Shing Co's current EBITDA Margin % of 8.19% is 60% below median its 10-year median of 20.67. Over the past 10 years, this metric has ranged from a low of 8.37 to a high of 26.03. The Industrial Products industry median EBITDA Margin % is 9.46. Shin Zu Shing Co's value of 8.19% is 13.4% below this industry median. Based on the distribution chart, Shin Zu Shing Co ranks #1636 out of 3033 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Shin Zu Shing Co has a GF Score™ of 88/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Shin Zu Shing Co's EBITDA Margin % compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Shin Zu Shing Co ranks #1636 out of 3033 companies for EBITDA Margin %. This places Shin Zu Shing Co in the lower half of its industry. The industry median EBITDA Margin % is 9.46. Shin Zu Shing Co's value of 8.19% is 13.4% below this benchmark. Historically, Shin Zu Shing Co's own EBITDA Margin % has ranged from 8.37 to 26.03 over the past decade. While the company's 10-year median is 20.67 vs. the industry median of 9.46, Shin Zu Shing Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.46, based on 3,033 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shin Zu Shing Co's current EBITDA Margin % of 8.19% is 13.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Shin Zu Shing Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shin Zu Shing Co's current EBITDA Margin % is 8.19%, which is 60% below median its own 10-year median of 20.67. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shin Zu Shing Co stock overvalued right now?
Based on GuruFocus' analysis, Shin Zu Shing Co (TPE:3376) is currently considered Fairly Valued. The stock's GF Value™ is NT$214.24, compared to a current price of NT$194.50 — trading 9.2% below its estimated fair value. The current EBITDA Margin % is 8.19%, which is 60% below median its 10-year median of 20.67 and 13.4% below the Industrial Products industry median of 9.46. Shin Zu Shing Co's overall GF Score™ is 88/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Shin Zu Shing Co (TPE:3376), the current EBITDA Margin % is 8.19% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shin Zu Shing Co (TPE:3376) Overvalued in 2026?
Based on GuruFocus' analysis, Shin Zu Shing Co stock appears to be undervalued.
The current stock price of NT$194.50 is trading 9.2% below its estimated GF Value™ of NT$214.24.
GuruFocus considers Shin Zu Shing Co to be Fairly Valued.
Key valuation signals for TPE:3376:
EBITDA Margin %: 8.19% (60% below median its 10-year median of 20.67)
GF Value™: NT$214.24 vs. price of NT$194.50 (9.2% below fair value)
Industry Position: 13.4% below the Industrial Products median (#1636 of 3033)
No single metric tells the full story. See the TPE:3376 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shin Zu Shing Co Ltd is engaged in research and development, design, production, assembly, testing, manufacturing, and sales of various precision springs, stamping parts, hinge components, and metal injection molding (MIM) products. It develops hinge components used in notebook computers, LCD monitors, digital cameras, and other electronic product parts. Its segments are Hinge products, which generate maximum revenue and engage in the design, manufacture, testing, and sales of hinge products for various components, including NB, LCD, and 3C hinge products and other parts such as springs and stamping parts for different types of laptops or consumer electronic products, as well as Milling products and MIM products. Geographically, it generates maximum revenue from Asia.
88GF Score
Get the complete analysis for TPE:3376
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:3376 has been successfully added to your 
