Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Shibaura Machine CoTSE:6104 -0.31%83 EBITDA Margin % is 10.03% as of Mar. 2026, which is 42% above its 10-year median of 7.04. GuruFocus rates TSE:6104 with a GF Score™ of 83/100 and a GF Value™ of 円3,326.76 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 3,031 Industrial Products companies, Shibaura Machine Co ranks worse than 66.38% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Shibaura Machine Co's EBITDA for the
three
months ended in Mar. 2026 was 円4,022 Mil. Shibaura Machine Co's Revenue for the
three
months ended in Mar. 2026 was 円40,096 Mil. Therefore, Shibaura Machine Co's EBITDA margin for the quarter that ended in Mar. 2026 was 10.03%.
Shibaura Machine Co (TSE:6104) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Shibaura Machine Co EBITDA Margin % Related Terms
Shibaura Machine Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Shibaura Machine Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6104 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Shibaura Machine Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shibaura Machine Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shibaura Machine Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Shibaura Machine Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shibaura Machine Co (TSE:6104) has a EBITDA Margin % of 10.03% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Shibaura Machine Co and its competitors. This is 42% above median its historical median of 7.04. Over the past decade, Shibaura Machine Co's EBITDA Margin % has ranged from 2.27 to 17.41. According to the industry distribution chart, Shibaura Machine Co ranks #2012 out of 3031 companies in the Industrial Products industry, placing it in the top 66.4%.
Is Shibaura Machine Co's EBITDA Margin % too high?
Shibaura Machine Co's current EBITDA Margin % of 10.03% is 42% above median its 10-year median of 7.04. Over the past 10 years, this metric has ranged from a low of 2.27 to a high of 17.41. The Industrial Products industry median EBITDA Margin % is 9.42. Shibaura Machine Co's value of 10.03% is 6.5% above this industry median. Based on the distribution chart, Shibaura Machine Co ranks #2012 out of 3031 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Shibaura Machine Co has a GF Score™ of 83/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Shibaura Machine Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Shibaura Machine Co ranks #2012 out of 3031 companies for EBITDA Margin %. This places Shibaura Machine Co in the lower half of its industry. The industry median EBITDA Margin % is 9.42. Shibaura Machine Co's value of 10.03% is 6.5% above this benchmark. Historically, Shibaura Machine Co's own EBITDA Margin % has ranged from 2.27 to 17.41 over the past decade. While the company's 10-year median is 7.04 vs. the industry median of 9.42, Shibaura Machine Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.42, based on 3,031 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shibaura Machine Co's current EBITDA Margin % of 10.03% is 6.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Shibaura Machine Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.42 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shibaura Machine Co's current EBITDA Margin % is 10.03%, which is 42% above median its own 10-year median of 7.04. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shibaura Machine Co stock overvalued right now?
Based on GuruFocus' analysis, Shibaura Machine Co (TSE:6104) is currently considered Significantly Overvalued. The stock's GF Value™ is 円3,326.76, compared to a current price of 円4,865.00 — trading 46.2% above its estimated fair value. The current EBITDA Margin % is 10.03%, which is 42% above median its 10-year median of 7.04 and 6.5% above the Industrial Products industry median of 9.42. Shibaura Machine Co's overall GF Score™ is 83/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Shibaura Machine Co (TSE:6104), the current EBITDA Margin % is 10.03% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shibaura Machine Co (TSE:6104) Overvalued in 2026?
Based on GuruFocus' analysis, Shibaura Machine Co stock appears to be overvalued.
The current stock price of 円4,865.00 is trading 46.2% above its estimated GF Value™ of 円3,326.76.
GuruFocus considers Shibaura Machine Co to be Significantly Overvalued.
Key valuation signals for TSE:6104:
EBITDA Margin %: 10.03% (42% above median its 10-year median of 7.04)
GF Value™: 円3,326.76 vs. price of 円4,865.00 (46.2% above fair value)
Industry Position: 6.5% above the Industrial Products median (#2012 of 3031)
No single metric tells the full story. See the TSE:6104 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shibaura Machine Co Ltd is engaged in manufacturing and distribution of molding machineries and machine tools. The business of the company is divided into two segments: molding machinery and machine tools. The company's product portfolio comprises injection molding machines, die-casting machines, plastic extrusion, large-size machine tools, portal-type machine tools, machining centers, horizontal boring machines, and high-precision machines, among others. The company's products are used in manufacturing of computers, automobile engines, transmissions, medical products, high-precision lenses, displays, construction machines, and wind power generation. A vast majority of the company's revenue is generated by the molding machinery segment, and the company earns most of its revenue in Japan.
83GF Score
Get the complete analysis for TSE:6104
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6104 has been successfully added to your 
