OKANO VALVE MFG CoTSE:6492 +0.06%56 EBITDA Margin % is 34.39% as of Mar. 2026, which is 207% above its 10-year median of 11.21. GuruFocus rates TSE:6492 with a GF Score™ of 56/100 and a GF Value™ of 円6,663.04 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 3,027 Industrial Products companies, OKANO VALVE MFG Co ranks better than 94.98% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. OKANO VALVE MFG Co's EBITDA for the
six
months ended in Mar. 2026 was 円2,010 Mil. OKANO VALVE MFG Co's Revenue for the
six
months ended in Mar. 2026 was 円5,845 Mil. Therefore, OKANO VALVE MFG Co's EBITDA margin for the quarter that ended in Mar. 2026 was 34.39%.
OKANO VALVE MFG Co (TSE:6492) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
OKANO VALVE MFG Co EBITDA Margin % Related Terms
OKANO VALVE MFG Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for OKANO VALVE MFG Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6492 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, OKANO VALVE MFG Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
OKANO VALVE MFG Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, OKANO VALVE MFG Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where OKANO VALVE MFG Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
OKANO VALVE MFG Co (TSE:6492) has a EBITDA Margin % of 34.39% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on OKANO VALVE MFG Co and its competitors. This is 207% above median its historical median of 11.21. According to the industry distribution chart, OKANO VALVE MFG Co ranks #152 out of 3027 companies in the Industrial Products industry, placing it in the top 5%.
Is OKANO VALVE MFG Co's EBITDA Margin % too high?
OKANO VALVE MFG Co's current EBITDA Margin % of 34.39% is 207% above median its 10-year median of 11.21. The Industrial Products industry median EBITDA Margin % is 9.44. OKANO VALVE MFG Co's value of 34.39% is 264.3% above this industry median. Based on the distribution chart, OKANO VALVE MFG Co ranks #152 out of 3027 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, OKANO VALVE MFG Co has a GF Score™ of 56/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does OKANO VALVE MFG Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, OKANO VALVE MFG Co ranks #152 out of 3027 companies for EBITDA Margin %. This places OKANO VALVE MFG Co in the top 5% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 9.44. OKANO VALVE MFG Co's value of 34.39% is 264.3% above this benchmark. While the company's 10-year median is 11.21 vs. the industry median of 9.44, OKANO VALVE MFG Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.44, based on 3,027 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. OKANO VALVE MFG Co's current EBITDA Margin % of 34.39% is 264.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on OKANO VALVE MFG Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.44 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. OKANO VALVE MFG Co's current EBITDA Margin % is 34.39%, which is 207% above median its own 10-year median of 11.21. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is OKANO VALVE MFG Co stock overvalued right now?
Based on GuruFocus' analysis, OKANO VALVE MFG Co (TSE:6492) is currently considered Significantly Overvalued. The stock's GF Value™ is 円6,663.04, compared to a current price of 円16,900.00 — trading 153.6% above its estimated fair value. The current EBITDA Margin % is 34.39%, which is 207% above median its 10-year median of 11.21 and 264.3% above the Industrial Products industry median of 9.44. OKANO VALVE MFG Co's overall GF Score™ is 56/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For OKANO VALVE MFG Co (TSE:6492), the current EBITDA Margin % is 34.39% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is OKANO VALVE MFG Co (TSE:6492) Overvalued in 2026?
Based on GuruFocus' analysis, OKANO VALVE MFG Co stock appears to be overvalued.
The current stock price of 円16,900.00 is trading 153.6% above its estimated GF Value™ of 円6,663.04.
GuruFocus considers OKANO VALVE MFG Co to be Significantly Overvalued.
Key valuation signals for TSE:6492:
EBITDA Margin %: 34.39% (207% above median its 10-year median of 11.21)
GF Value™: 円6,663.04 vs. price of 円16,900.00 (153.6% above fair value)
Industry Position: 264.3% above the Industrial Products median (#152 of 3027)
No single metric tells the full story. See the TSE:6492 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
OKANO VALVE MFG Co Ltd is engaged in the development, manufacturing and maintenance of high temperature and high-pressure valves for industrial applications. It manufactures other industrial products and parts using its foundry capabilities. The company also carries out various construction and maintenance works in industrial plants. It Implements and supports condition monitoring of industrial valves using current signature analysis technology.
56GF Score
Get the complete analysis for TSE:6492
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6492 has been successfully added to your 
