Plytec Holding BhdXKLS:0289 -2.63%34 EBITDA Margin % is 23.73% as of Mar. 2026, which is 25% above its 10-year median of 18.93. GuruFocus rates XKLS:0289 with a GF Score™ of 34/100 and a GF Value™ of RM0.27 (Possible Value Trap). The stock has 8 warning signs investors should review. Among 404 Building Materials companies, Plytec Holding Bhd ranks worse than 52.97% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Plytec Holding Bhd's EBITDA for the
three
months ended in Mar. 2026 was RM10.7 Mil. Plytec Holding Bhd's Revenue for the
three
months ended in Mar. 2026 was RM44.9 Mil. Therefore, Plytec Holding Bhd's EBITDA margin for the quarter that ended in Mar. 2026 was 23.73%.
Plytec Holding Bhd (XKLS:0289) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Plytec Holding Bhd EBITDA Margin % Related Terms
Plytec Holding Bhd EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Plytec Holding Bhd's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
XKLS:0289 vs CRH, VMC, MLM: EBITDA Margin % Comparison
For the Building Materials subindustry, Plytec Holding Bhd's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Plytec Holding Bhd EBITDA Margin % vs Building Materials Industry
For the Building Materials industry and Basic Materials sector, Plytec Holding Bhd's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Plytec Holding Bhd's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Plytec Holding Bhd (XKLS:0289) has a EBITDA Margin % of 23.73% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Plytec Holding Bhd and its competitors. This is 25% above median its historical median of 18.93. Over the past decade, Plytec Holding Bhd's EBITDA Margin % has ranged from 12.24 to 22.95. According to the industry distribution chart, Plytec Holding Bhd ranks #214 out of 404 companies in the Building Materials industry, placing it in the top 53%.
Is Plytec Holding Bhd's EBITDA Margin % too high?
Plytec Holding Bhd's current EBITDA Margin % of 23.73% is 25% above median its 10-year median of 18.93. Over the past 10 years, this metric has ranged from a low of 12.24 to a high of 22.95. The Building Materials industry median EBITDA Margin % is 13.34. Plytec Holding Bhd's value of 23.73% is 78% above this industry median. Based on the distribution chart, Plytec Holding Bhd ranks #214 out of 404 companies in the Building Materials industry, which is below the industry midpoint. Overall, Plytec Holding Bhd has a GF Score™ of 34/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Plytec Holding Bhd's EBITDA Margin % compare to CRH and VMC?
According to the Building Materials industry distribution chart, Plytec Holding Bhd ranks #214 out of 404 companies for EBITDA Margin %. This places Plytec Holding Bhd in the lower half of its industry. The industry median EBITDA Margin % is 13.34. Plytec Holding Bhd's value of 23.73% is 78% above this benchmark. Historically, Plytec Holding Bhd's own EBITDA Margin % has ranged from 12.24 to 22.95 over the past decade. While the company's 10-year median is 18.93 vs. the industry median of 13.34, Plytec Holding Bhd has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Building Materials company?
The median EBITDA Margin % among Building Materials companies is 13.34, based on 404 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Plytec Holding Bhd's current EBITDA Margin % of 23.73% is 78% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Plytec Holding Bhd and its competitors. For the Building Materials industry, the median EBITDA Margin % is 13.34 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Plytec Holding Bhd's current EBITDA Margin % is 23.73%, which is 25% above median its own 10-year median of 18.93. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Plytec Holding Bhd stock overvalued right now?
Based on GuruFocus' analysis, Plytec Holding Bhd (XKLS:0289) is currently considered Possible Value Trap. The stock's GF Value™ is RM0.27, compared to a current price of RM0.19 — trading 31.5% below its estimated fair value. The current EBITDA Margin % is 23.73%, which is 25% above median its 10-year median of 18.93 and 78% above the Building Materials industry median of 13.34. Plytec Holding Bhd's overall GF Score™ is 34/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Plytec Holding Bhd (XKLS:0289), the current EBITDA Margin % is 23.73% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Plytec Holding Bhd (XKLS:0289) Overvalued in 2026?
Based on GuruFocus' analysis, Plytec Holding Bhd stock appears to be undervalued.
The current stock price of RM0.19 is trading 31.5% below its estimated GF Value™ of RM0.27.
GuruFocus considers Plytec Holding Bhd to be Possible Value Trap.
Key valuation signals for XKLS:0289:
EBITDA Margin %: 23.73% (25% above median its 10-year median of 18.93)
GF Value™: RM0.27 vs. price of RM0.19 (31.5% below fair value)
Industry Position: 78% above the Building Materials median (#214 of 404)
No single metric tells the full story. See the XKLS:0289 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Plytec Holding Bhd is principally involved in the provision of construction engineering solutions and trading and distribution of core and general building materials for construction projects. Its construction engineering solutions and services include CME Solutions, DDE Solutions, and PC Solutions, which are aimed at increasing the efficiency and safety in construction activities via the adoption of industrialization practices. The company's reportable segments are Construction method engineering solutions, Manufacturing, trading and distribution of building materials, Digital design and engineering solutions, Prefabricated construction solutions and Polymer material compounding and product. The majority of revenue is generated from construction method engineering solutions.
34GF Score
Get the complete analysis for XKLS:0289
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XKLS:0289 has been successfully added to your 
