GE-Shen BhdXKLS:7197 83 EBITDA Margin % is 12.77% as of Mar. 2026, which is 1% above its 10-year median of 12.60. GuruFocus rates XKLS:7197 with a GF Score™ of 83/100 and a GF Value™ of RM1.65 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 3,028 Industrial Products companies, GE-Shen Bhd ranks better than 71.53% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. GE-Shen Bhd's EBITDA for the
three
months ended in Mar. 2026 was RM11.5 Mil. GE-Shen Bhd's Revenue for the
three
months ended in Mar. 2026 was RM90.2 Mil. Therefore, GE-Shen Bhd's EBITDA margin for the quarter that ended in Mar. 2026 was 12.77%.
GE-Shen Bhd (XKLS:7197) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
GE-Shen Bhd EBITDA Margin % Related Terms
GE-Shen Bhd EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for GE-Shen Bhd's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
XKLS:7197 vs CRS, ATI, MLI: EBITDA Margin % Comparison
For the Metal Fabrication subindustry, GE-Shen Bhd's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
GE-Shen Bhd EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, GE-Shen Bhd's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where GE-Shen Bhd's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
GE-Shen Bhd (XKLS:7197) has a EBITDA Margin % of 12.77% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on GE-Shen Bhd and its competitors. This is near median its historical median of 12.60. Over the past decade, GE-Shen Bhd's EBITDA Margin % has ranged from 3.54 to 17.39. According to the industry distribution chart, GE-Shen Bhd ranks #862 out of 3028 companies in the Industrial Products industry, placing it in the top 28.5%.
Is GE-Shen Bhd's EBITDA Margin % too high?
GE-Shen Bhd's current EBITDA Margin % of 12.77% is near median its 10-year median of 12.60. Over the past 10 years, this metric has ranged from a low of 3.54 to a high of 17.39. The Industrial Products industry median EBITDA Margin % is 9.45. GE-Shen Bhd's value of 12.77% is 35.2% above this industry median. Based on the distribution chart, GE-Shen Bhd ranks #862 out of 3028 companies in the Industrial Products industry, which is above the industry midpoint. Overall, GE-Shen Bhd has a GF Score™ of 83/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does GE-Shen Bhd's EBITDA Margin % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, GE-Shen Bhd ranks #862 out of 3028 companies for EBITDA Margin %. This puts GE-Shen Bhd in the upper half of its industry. The industry median EBITDA Margin % is 9.45. GE-Shen Bhd's value of 12.77% is 35.2% above this benchmark. Historically, GE-Shen Bhd's own EBITDA Margin % has ranged from 3.54 to 17.39 over the past decade. While the company's 10-year median is 12.60 vs. the industry median of 9.45, GE-Shen Bhd has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.45, based on 3,028 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. GE-Shen Bhd's current EBITDA Margin % of 12.77% is 35.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on GE-Shen Bhd and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. GE-Shen Bhd's current EBITDA Margin % is 12.77%, which is near median its own 10-year median of 12.60. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is GE-Shen Bhd stock overvalued right now?
Based on GuruFocus' analysis, GE-Shen Bhd (XKLS:7197) is currently considered Modestly Undervalued. The stock's GF Value™ is RM1.65, compared to a current price of RM1.44 — trading 12.7% below its estimated fair value. The current EBITDA Margin % is 12.77%, which is near median its 10-year median of 12.60 and 35.2% above the Industrial Products industry median of 9.45. GE-Shen Bhd's overall GF Score™ is 83/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For GE-Shen Bhd (XKLS:7197), the current EBITDA Margin % is 12.77% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is GE-Shen Bhd (XKLS:7197) Overvalued in 2026?
Based on GuruFocus' analysis, GE-Shen Bhd stock appears to be undervalued.
The current stock price of RM1.44 is trading 12.7% below its estimated GF Value™ of RM1.65.
GuruFocus considers GE-Shen Bhd to be Modestly Undervalued.
Key valuation signals for XKLS:7197:
EBITDA Margin %: 12.77% (near median its 10-year median of 12.60)
GF Value™: RM1.65 vs. price of RM1.44 (12.7% below fair value)
Industry Position: 35.2% above the Industrial Products median (#862 of 3028)
No single metric tells the full story. See the XKLS:7197 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
GE-Shen Corp Bhd is principally engaged in the business of investment holding and the provision of management services. It provides manufacturing services and produces components for industrial applications. Its activities include printed circuit board assembly (PCBA), injection molding, compression and rubber molding, product assembly, and tooling design and fabrication. The company is organized into two main geographical segments: i) Malaysia and Singapore, which consists of manufacture of plastic moulded products, components, tools and die, fabricated metal products, printed circuit board assembly, and ii) Vietnam, which consists of the manufacture of plastic moulded products and components. The majority of the company's revenue is derived from the Malaysia and Singapore segment.
83GF Score
Get the complete analysis for XKLS:7197
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XKLS:7197 has been successfully added to your 
