Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Dongil Metal CoXKRX:109860 +0.95%80 EBITDA Margin % is 8.64% as of Mar. 2026, which is 44% below its 10-year median of 15.56. GuruFocus rates XKRX:109860 with a GF Score™ of 80/100 and a GF Value™ of ₩8,438.10 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 3,035 Industrial Products companies, Dongil Metal Co ranks better than 55.42% on this metric.
EBITDA Margin % is calculated as EBITDA divided by its Revenue. Dongil Metal Co's EBITDA for the
three
months ended in Mar. 2026 was ₩2,470 Mil. Dongil Metal Co's Revenue for the
three
months ended in Mar. 2026 was ₩28,574 Mil. Therefore, Dongil Metal Co's EBITDA margin for the quarter that ended in Mar. 2026 was 8.64%.
Dongil Metal Co (XKRX:109860) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Dongil Metal Co EBITDA Margin % Related Terms
Dongil Metal Co EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Dongil Metal Co's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
XKRX:109860 vs GEV, ETN, PH: EBITDA Margin % Comparison
For the Specialty Industrial Machinery subindustry, Dongil Metal Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dongil Metal Co EBITDA Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Dongil Metal Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Dongil Metal Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dongil Metal Co (XKRX:109860) has a EBITDA Margin % of 8.64% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Dongil Metal Co and its competitors. This is 44% below median its historical median of 15.56. Over the past decade, Dongil Metal Co's EBITDA Margin % has ranged from 2.08 to 31.20. According to the industry distribution chart, Dongil Metal Co ranks #1353 out of 3035 companies in the Industrial Products industry, placing it in the top 44.6%.
Is Dongil Metal Co's EBITDA Margin % too high?
Dongil Metal Co's current EBITDA Margin % of 8.64% is 44% below median its 10-year median of 15.56. Over the past 10 years, this metric has ranged from a low of 2.08 to a high of 31.20. The Industrial Products industry median EBITDA Margin % is 9.46. Dongil Metal Co's value of 8.64% is 8.7% below this industry median. Based on the distribution chart, Dongil Metal Co ranks #1353 out of 3035 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Dongil Metal Co has a GF Score™ of 80/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Dongil Metal Co's EBITDA Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Dongil Metal Co ranks #1353 out of 3035 companies for EBITDA Margin %. This puts Dongil Metal Co in the upper half of its industry. The industry median EBITDA Margin % is 9.46. Dongil Metal Co's value of 8.64% is 8.7% below this benchmark. Historically, Dongil Metal Co's own EBITDA Margin % has ranged from 2.08 to 31.20 over the past decade. While the company's 10-year median is 15.56 vs. the industry median of 9.46, Dongil Metal Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for an Industrial Products company?
The median EBITDA Margin % among Industrial Products companies is 9.46, based on 3,035 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dongil Metal Co's current EBITDA Margin % of 8.64% is 8.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Dongil Metal Co and its competitors. For the Industrial Products industry, the median EBITDA Margin % is 9.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dongil Metal Co's current EBITDA Margin % is 8.64%, which is 44% below median its own 10-year median of 15.56. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dongil Metal Co stock overvalued right now?
Based on GuruFocus' analysis, Dongil Metal Co (XKRX:109860) is currently considered Modestly Undervalued. The stock's GF Value™ is ₩8,438.10, compared to a current price of ₩7,470.00 — trading 11.5% below its estimated fair value. The current EBITDA Margin % is 8.64%, which is 44% below median its 10-year median of 15.56 and 8.7% below the Industrial Products industry median of 9.46. Dongil Metal Co's overall GF Score™ is 80/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Dongil Metal Co (XKRX:109860), the current EBITDA Margin % is 8.64% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dongil Metal Co (XKRX:109860) Overvalued in 2026?
Based on GuruFocus' analysis, Dongil Metal Co stock appears to be undervalued.
The current stock price of ₩7,470.00 is trading 11.5% below its estimated GF Value™ of ₩8,438.10.
GuruFocus considers Dongil Metal Co to be Modestly Undervalued.
Key valuation signals for XKRX:109860:
EBITDA Margin %: 8.64% (44% below median its 10-year median of 15.56)
GF Value™: ₩8,438.10 vs. price of ₩7,470.00 (11.5% below fair value)
Industry Position: 8.7% below the Industrial Products median (#1353 of 3035)
No single metric tells the full story. See the XKRX:109860 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dongil Metal Co Ltd is a Korea based construction machinery and equipment parts manufacturing company. Its product portfolio covers boom bearing, rear bearing, center bearing, sprocket, idler, turning joint, sheave, boomjoint, tumbler and others.
80GF Score
Get the complete analysis for XKRX:109860
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XKRX:109860 has been successfully added to your 
