Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Tai-Saw Technology CoROCO:3221 -1.86%60 EV-to-EBIT is 33.57 as of Sep. 10, 2026, which is 62% above its 10-year median of 20.70. GuruFocus rates ROCO:3221 with a GF Score™ of 60/100 and a GF Value™ of NT$26.80 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 1,775 Hardware companies, Tai-Saw Technology Co ranks worse than 69.35% on this metric.
Tai-Saw Technology Co (ROCO:3221) EV-to-EBIT Explanation
This is a more accurate valuation of companies' operation because it considers the debt and cash on its balance sheet, and non-operating items such as interest payment, tax, and one-time items are not included in the Operating Income.
Tai-Saw Technology Co's Enterprise Value for the quarter that ended in Jun. 2026 was NT$5,990 Mil.
Tai-Saw Technology Co's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$143 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:3221 vs CSCO, MSI, LITE: EV-to-EBIT Comparison
For the Communication Equipment subindustry, Tai-Saw Technology Co's EV-to-EBIT, along with its competitors' market caps and EV-to-EBIT data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Tai-Saw Technology Co EV-to-EBIT vs Hardware Industry
For the Hardware industry and Technology sector, Tai-Saw Technology Co's EV-to-EBIT distribution charts can be found below:
* The bar in red indicates where Tai-Saw Technology Co's EV-to-EBIT falls into.
Tai-Saw Technology Co's current Enterprise Value is NT$4,815 Mil.
Tai-Saw Technology Co's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$143 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tai-Saw Technology Co (ROCO:3221) has a EV-to-EBIT of 33.57 as of Sep. 10, 2026. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Tai-Saw Technology Co and its competitors. This is 62% above median its historical median of 20.70. According to the industry distribution chart, Tai-Saw Technology Co ranks #1231 out of 1775 companies in the Hardware industry, placing it in the top 69.4%.
Is Tai-Saw Technology Co's EV-to-EBIT too high?
Tai-Saw Technology Co's current EV-to-EBIT of 33.57 is 62% above median its 10-year median of 20.70. The Hardware industry median EV-to-EBIT is 18.69. Tai-Saw Technology Co's value of 33.57 is 79.6% above this industry median. Based on the distribution chart, Tai-Saw Technology Co ranks #1231 out of 1775 companies in the Hardware industry, which is below the industry midpoint. Overall, Tai-Saw Technology Co has a GF Score™ of 60/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Tai-Saw Technology Co's EV-to-EBIT compare to CSCO and MSI?
According to the Hardware industry distribution chart, Tai-Saw Technology Co ranks #1231 out of 1775 companies for EV-to-EBIT. This places Tai-Saw Technology Co in the lower half of its industry. The industry median EV-to-EBIT is 18.69. Tai-Saw Technology Co's value of 33.57 is 79.6% above this benchmark. While the company's 10-year median is 20.70 vs. the industry median of 18.69, Tai-Saw Technology Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBIT for a Hardware company?
The median EV-to-EBIT among Hardware companies is 18.69, based on 1,775 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBIT significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBIT should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Tai-Saw Technology Co's current EV-to-EBIT of 33.57 is 79.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBIT mean?
A high EV-to-EBIT can signal that a stock is expensive relative to its fundamentals. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Tai-Saw Technology Co and its competitors. For the Hardware industry, the median EV-to-EBIT is 18.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tai-Saw Technology Co's current EV-to-EBIT is 33.57, which is 62% above median its own 10-year median of 20.70. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Tai-Saw Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Tai-Saw Technology Co (ROCO:3221) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$26.80, compared to a current price of NT$47.45 — trading 77.1% above its estimated fair value. The current EV-to-EBIT is 33.57, which is 62% above median its 10-year median of 20.70 and 79.6% above the Hardware industry median of 18.69. Tai-Saw Technology Co's overall GF Score™ is 60/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBIT calculated?
EV-to-EBIT is calculated from a company's financial statements. For Tai-Saw Technology Co (ROCO:3221), the current EV-to-EBIT is 33.57 as of Sep. 10, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Tai-Saw Technology Co (ROCO:3221) Overvalued in 2026?
Based on GuruFocus' analysis, Tai-Saw Technology Co stock appears to be overvalued.
The current stock price of NT$47.45 is trading 77.1% above its estimated GF Value™ of NT$26.80.
GuruFocus considers Tai-Saw Technology Co to be Significantly Overvalued.
Key valuation signals for ROCO:3221:
EV-to-EBIT: 33.57 (62% above median its 10-year median of 20.70)
GF Value™: NT$26.80 vs. price of NT$47.45 (77.1% above fair value)
Industry Position: 79.6% above the Hardware median (#1231 of 1775)
No single metric tells the full story. See the ROCO:3221 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Tai-Saw Technology Co Ltd is engaged in research and development, design, manufacture, and sales of radio communications components and their system equipment, computer hardware, and peripheral components as well as the manufacture and packaging of integrated circuits. Its products include RF SAW Filters, IF SAW Filters, SAW Resonators, SAW Duplexers, SAW Oscillators, Crystal Resonators, Crystal Filter, and others. Its products are mainly used in mobile phones, data communications, wireless remote controls, and others. The majority of the company's revenue is generated from the sale of frequency components. Geographically, it derives maximum revenue from Asia (excluding Taiwan) and the rest from Taiwan, the Americas, Europe, and other regions.
60GF Score
Get the complete analysis for ROCO:3221
EV-to-EBIT is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:3221 has been successfully added to your 
