Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
E&R EngineeringROCO:8027 -3.74%51 EV-to-EBIT is 265.74 as of Sep. 12, 2026, which is 2311% above its 10-year median of 11.02. GuruFocus rates ROCO:8027 with a GF Score™ of 51/100 and a GF Value™ of NT$117.42 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 2,366 Industrial Products companies, E&R Engineering ranks worse than 97% on this metric.
This is a more accurate valuation of companies' operation because it considers the debt and cash on its balance sheet, and non-operating items such as interest payment, tax, and one-time items are not included in the Operating Income.
E&R Engineering's Enterprise Value for the quarter that ended in Jun. 2026 was NT$23,298 Mil.
E&R Engineering's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$68 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
E&R Engineering EV-to-EBIT Related Terms
E&R Engineering EV-to-EBIT Historical Data
* Premium members only.
The historical data trend for E&R Engineering's EV-to-EBIT can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, E&R Engineering's EV-to-EBIT, along with its competitors' market caps and EV-to-EBIT data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
E&R Engineering EV-to-EBIT vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, E&R Engineering's EV-to-EBIT distribution charts can be found below:
* The bar in red indicates where E&R Engineering's EV-to-EBIT falls into.
E&R Engineering's current Enterprise Value is NT$18,039 Mil.
E&R Engineering's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$68 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
E&R Engineering (ROCO:8027) has a EV-to-EBIT of 265.74 as of Sep. 12, 2026. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on E&R Engineering and its competitors. This is 2311% above median its historical median of 11.02. According to the industry distribution chart, E&R Engineering ranks #2295 out of 2366 companies in the Industrial Products industry, placing it in the top 97%.
Is E&R Engineering's EV-to-EBIT too high?
E&R Engineering's current EV-to-EBIT of 265.74 is 2311% above median its 10-year median of 11.02. The Industrial Products industry median EV-to-EBIT is 18.82. E&R Engineering's value of 265.74 is 1312.4% above this industry median. Based on the distribution chart, E&R Engineering ranks #2295 out of 2366 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, E&R Engineering has a GF Score™ of 51/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does E&R Engineering's EV-to-EBIT compare to GEV and ETN?
According to the Industrial Products industry distribution chart, E&R Engineering ranks #2295 out of 2366 companies for EV-to-EBIT. This places E&R Engineering in the lower half of its industry. The industry median EV-to-EBIT is 18.82. E&R Engineering's value of 265.74 is 1312.4% above this benchmark. While the company's 10-year median is 11.02 vs. the industry median of 18.82, E&R Engineering has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBIT for an Industrial Products company?
The median EV-to-EBIT among Industrial Products companies is 18.82, based on 2,366 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBIT significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBIT should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. E&R Engineering's current EV-to-EBIT of 265.74 is 1312.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBIT mean?
A high EV-to-EBIT can signal that a stock is expensive relative to its fundamentals. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on E&R Engineering and its competitors. For the Industrial Products industry, the median EV-to-EBIT is 18.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. E&R Engineering's current EV-to-EBIT is 265.74, which is 2311% above median its own 10-year median of 11.02. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is E&R Engineering stock overvalued right now?
Based on GuruFocus' analysis, E&R Engineering (ROCO:8027) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$117.42, compared to a current price of NT$167.50 — trading 42.7% above its estimated fair value. The current EV-to-EBIT is 265.74, which is 2311% above median its 10-year median of 11.02 and 1312.4% above the Industrial Products industry median of 18.82. E&R Engineering's overall GF Score™ is 51/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBIT calculated?
EV-to-EBIT is calculated from a company's financial statements. For E&R Engineering (ROCO:8027), the current EV-to-EBIT is 265.74 as of Sep. 12, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is E&R Engineering (ROCO:8027) Overvalued in 2026?
Based on GuruFocus' analysis, E&R Engineering stock appears to be overvalued.
The current stock price of NT$167.50 is trading 42.7% above its estimated GF Value™ of NT$117.42.
GuruFocus considers E&R Engineering to be Significantly Overvalued.
Key valuation signals for ROCO:8027:
EV-to-EBIT: 265.74 (2311% above median its 10-year median of 11.02)
GF Value™: NT$117.42 vs. price of NT$167.50 (42.7% above fair value)
Industry Position: 1312.4% above the Industrial Products median (#2295 of 2366)
No single metric tells the full story. See the ROCO:8027 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
E&R Engineering Corp engages mainly in the planning, designing, manufacturing, installing, and selling of automatic machines, related components, computer software, and pollution control equipment. Its main product offerings include laser and plasma equipment for semiconductor, LED, and passive component industries; laboratory testing equipment, flexible printed circuit equipment, and semiconductor packaging solutions. The Group operates in the following reportable segments: Automation Equipment, which generates the maximum revenue, Flexible Printed Circuit (FPC), Semiconductor Packaging Materials, and Others. Geographically, it generates maximum revenue from Taiwan, and the rest from Hong Kong and Mainland China, Southeast Asia, America, Europe, and other regions.
51GF Score
Get the complete analysis for ROCO:8027
EV-to-EBIT is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:8027 has been successfully added to your 
