Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Yuen Chang Stainless Steel Co (TPE:2069) EV-to-EBIT Explanation
This is a more accurate valuation of companies' operation because it considers the debt and cash on its balance sheet, and non-operating items such as interest payment, tax, and one-time items are not included in the Operating Income.
Yuen Chang Stainless Steel Co's Enterprise Value for the quarter that ended in Jun. 2026 was NT$7,519 Mil.
Yuen Chang Stainless Steel Co's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$619 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Yuen Chang Stainless Steel Co EV-to-EBIT Related Terms
Yuen Chang Stainless Steel Co EV-to-EBIT Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Yuen Chang Stainless Steel Co's EV-to-EBIT, along with its competitors' market caps and EV-to-EBIT data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Yuen Chang Stainless Steel Co EV-to-EBIT vs Steel Industry
For the Steel industry and Basic Materials sector, Yuen Chang Stainless Steel Co's EV-to-EBIT distribution charts can be found below:
* The bar in red indicates where Yuen Chang Stainless Steel Co's EV-to-EBIT falls into.
Yuen Chang Stainless Steel Co's current Enterprise Value is NT$7,835 Mil.
Yuen Chang Stainless Steel Co's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$619 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Yuen Chang Stainless Steel Co (TPE:2069) has a EV-to-EBIT of 12.67 as of Aug. 23, 2026. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Yuen Chang Stainless Steel Co and its competitors. This is 15% below median its historical median of 14.93. According to the industry distribution chart, Yuen Chang Stainless Steel Co ranks #255 out of 489 companies in the Steel industry, placing it in the top 52.1%.
Is Yuen Chang Stainless Steel Co's EV-to-EBIT too high?
Yuen Chang Stainless Steel Co's current EV-to-EBIT of 12.67 is 15% below median its 10-year median of 14.93. The Steel industry median EV-to-EBIT is 12.35. Yuen Chang Stainless Steel Co's value of 12.67 is 2.6% above this industry median. Based on the distribution chart, Yuen Chang Stainless Steel Co ranks #255 out of 489 companies in the Steel industry, which is below the industry midpoint. Overall, Yuen Chang Stainless Steel Co has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Yuen Chang Stainless Steel Co's EV-to-EBIT compare to NUE and STLD?
According to the Steel industry distribution chart, Yuen Chang Stainless Steel Co ranks #255 out of 489 companies for EV-to-EBIT. This places Yuen Chang Stainless Steel Co in the lower half of its industry. The industry median EV-to-EBIT is 12.35. Yuen Chang Stainless Steel Co's value of 12.67 is 2.6% above this benchmark. While the company's 10-year median is 14.93 vs. the industry median of 12.35, Yuen Chang Stainless Steel Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBIT for a Steel company?
The median EV-to-EBIT among Steel companies is 12.35, based on 489 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBIT significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBIT should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Yuen Chang Stainless Steel Co's current EV-to-EBIT of 12.67 is 2.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBIT mean?
A high EV-to-EBIT can signal that a stock is expensive relative to its fundamentals. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on Yuen Chang Stainless Steel Co and its competitors. For the Steel industry, the median EV-to-EBIT is 12.35 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Yuen Chang Stainless Steel Co's current EV-to-EBIT is 12.67, which is 15% below median its own 10-year median of 14.93. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Yuen Chang Stainless Steel Co stock overvalued right now?
Based on GuruFocus' analysis, Yuen Chang Stainless Steel Co (TPE:2069) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$14.43, compared to a current price of NT$20.35 — trading 41% above its estimated fair value. The current EV-to-EBIT is 12.67, which is 15% below median its 10-year median of 14.93 and 2.6% above the Steel industry median of 12.35. Yuen Chang Stainless Steel Co's overall GF Score™ is 68/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBIT calculated?
EV-to-EBIT is calculated from a company's financial statements. For Yuen Chang Stainless Steel Co (TPE:2069), the current EV-to-EBIT is 12.67 as of Aug. 23, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Yuen Chang Stainless Steel Co (TPE:2069) Overvalued in 2026?
Based on GuruFocus' analysis, Yuen Chang Stainless Steel Co stock appears to be overvalued.
The current stock price of NT$20.35 is trading 41% above its estimated GF Value™ of NT$14.43.
GuruFocus considers Yuen Chang Stainless Steel Co to be Significantly Overvalued.
Key valuation signals for TPE:2069:
EV-to-EBIT: 12.67 (15% below median its 10-year median of 14.93)
GF Value™: NT$14.43 vs. price of NT$20.35 (41% above fair value)
Industry Position: 2.6% above the Steel median (#255 of 489)
No single metric tells the full story. See the TPE:2069 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Yuen Chang Stainless Steel Co Ltd specializes in stainless steel processing and manufacturing. The company, together with its subsidiaries, is mainly involved in stainless steel shearing, splitting, surface finishing, processing, trading, and the import and export of stainless steel products. Geographically, it derives maximum revenue from Asia (excluding Taiwan), followed by the Americas, Taiwan, and other regions.
68GF Score
Get the complete analysis for TPE:2069
EV-to-EBIT is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2069 has been successfully added to your 
