Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Panjawattana Plastic PCLBKK:PJW-R 76 Equity-to-Asset is 0.37 as of Jun. 2026, which is 3% below its 10-year median of 0.38. GuruFocus rates BKK:PJW-R with a GF Score™ of 76/100 and a GF Value™ of ฿2.96 (Possible Value Trap). The stock has 3 warning signs investors should review. Among 411 Packaging & Containers companies, Panjawattana Plastic PCL ranks worse than 79.56% on this metric.
The historical rank and industry rank for Panjawattana Plastic PCL's Equity-to-Asset or its related term are showing as below:
BKK:PJW-R'
s Equity-to-Asset Range Over the Past 10 Years
Min: 0.33 Med: 0.38 Max: 0.45
Current: 0.37
During the past 13 years, the highest Equity to Asset Ratio of Panjawattana Plastic PCL was 0.45. The lowest was 0.33. And the median was 0.38.
BKK:PJW-R's Equity-to-Asset is ranked worse than 79.56% of 411
companies
in the Packaging & Containers industry
Industry Median: 0.55
vs BKK:PJW-R: 0.37
Equity to Asset ratio can vary greatly across different industries, as they have different capital structure. A company with smaller Equity to Asset ratio (more leveraged) may have higher ROE % because of the leverage.
For banks, the required minimum Equity to Asset ratio by regulation is 5%. Some stronger banks may have Equity to Asset Ratio of more than 10%.
Panjawattana Plastic PCL Equity-to-Asset Related Terms
Panjawattana Plastic PCL Equity-to-Asset Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:PJW-R vs SW, AMCR, PKG: Equity-to-Asset Comparison
For the Packaging & Containers subindustry, Panjawattana Plastic PCL's Equity-to-Asset, along with its competitors' market caps and Equity-to-Asset data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Panjawattana Plastic PCL Equity-to-Asset vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Panjawattana Plastic PCL's Equity-to-Asset distribution charts can be found below:
* The bar in red indicates where Panjawattana Plastic PCL's Equity-to-Asset falls into.
Equity to Asset ratio measures the ratios of the portion of the asset owned by shareholders out of the total asset. It indicates the leverage of the company, and the amount of debt the company uses in its operation.
Equity to Asset ratio is calculated by dividing total stockholders equity by total asset.
Panjawattana Plastic PCL's Equity to Asset Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Panjawattana Plastic PCL (BKK:PJW-R) has a Equity-to-Asset of 0.37 as of Jun. 2026. Equity-to-asset ratio equals total company equity divided by total assets. It measures financial leverage. View historical data on Panjawattana Plastic PCL and its competitors. This is near median its historical median of 0.38. Over the past decade, Panjawattana Plastic PCL's Equity-to-Asset has ranged from 0.33 to 0.45. According to the industry distribution chart, Panjawattana Plastic PCL ranks #327 out of 411 companies in the Packaging & Containers industry, placing it in the top 79.6%.
Is Panjawattana Plastic PCL's Equity-to-Asset too high?
Panjawattana Plastic PCL's current Equity-to-Asset of 0.37 is near median its 10-year median of 0.38. Over the past 10 years, this metric has ranged from a low of 0.33 to a high of 0.45. The Packaging & Containers industry median Equity-to-Asset is 0.55. Panjawattana Plastic PCL's value of 0.37 is 32.7% below this industry median. Based on the distribution chart, Panjawattana Plastic PCL ranks #327 out of 411 companies in the Packaging & Containers industry, which is in the bottom quartile relative to peers. Overall, Panjawattana Plastic PCL has a GF Score™ of 76/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Panjawattana Plastic PCL's Equity-to-Asset compare to SW and AMCR?
According to the Packaging & Containers industry distribution chart, Panjawattana Plastic PCL ranks #327 out of 411 companies for Equity-to-Asset. This places Panjawattana Plastic PCL in the lower half of its industry. The industry median Equity-to-Asset is 0.55. Panjawattana Plastic PCL's value of 0.37 is 32.7% below this benchmark. Historically, Panjawattana Plastic PCL's own Equity-to-Asset has ranged from 0.33 to 0.45 over the past decade. While the company's 10-year median is 0.38 vs. the industry median of 0.55, Panjawattana Plastic PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Equity-to-Asset for a Packaging & Containers company?
The median Equity-to-Asset among Packaging & Containers companies is 0.55, based on 411 companies in the industry. Companies in the top quartile (top 25%) have a Equity-to-Asset significantly above this median, while those in the bottom quartile fall well below. However, Equity-to-Asset should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Panjawattana Plastic PCL's current Equity-to-Asset of 0.37 is 32.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Equity-to-Asset mean?
A high Equity-to-Asset can signal that a stock is expensive relative to its fundamentals. Equity-to-asset ratio equals total company equity divided by total assets. It measures financial leverage. View historical data on Panjawattana Plastic PCL and its competitors. For the Packaging & Containers industry, the median Equity-to-Asset is 0.55 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Panjawattana Plastic PCL's current Equity-to-Asset is 0.37, which is near median its own 10-year median of 0.38. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Panjawattana Plastic PCL stock overvalued right now?
Based on GuruFocus' analysis, Panjawattana Plastic PCL (BKK:PJW-R) is currently considered Possible Value Trap. The stock's GF Value™ is ฿2.96, compared to a current price of ฿2.02 — trading 31.8% below its estimated fair value. The current Equity-to-Asset is 0.37, which is near median its 10-year median of 0.38 and 32.7% below the Packaging & Containers industry median of 0.55. Panjawattana Plastic PCL's overall GF Score™ is 76/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Equity-to-Asset calculated?
Equity-to-Asset is calculated from a company's financial statements. For Panjawattana Plastic PCL (BKK:PJW-R), the current Equity-to-Asset is 0.37 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Panjawattana Plastic PCL (BKK:PJW-R) Overvalued in 2026?
Based on GuruFocus' analysis, Panjawattana Plastic PCL stock appears to be undervalued.
The current stock price of ฿2.02 is trading 31.8% below its estimated GF Value™ of ฿2.96.
GuruFocus considers Panjawattana Plastic PCL to be Possible Value Trap.
Key valuation signals for BKK:PJW-R:
Equity-to-Asset: 0.37 (near median its 10-year median of 0.38)
GF Value™: ฿2.96 vs. price of ฿2.02 (31.8% below fair value)
Industry Position: 32.7% below the Packaging & Containers median (#327 of 411)
No single metric tells the full story. See the BKK:PJW-R stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Panjawattana Plastic PCL is manufacturer and distributor of packaging for consumer product, Agro chemical, automotive parts and materials from plastic imitation. The company operates its business through the following segments, Samuthsakhon Plant, Chonburi Plant, Bangkok Plant, Jiangsu Plant, Tianjin Plant, Service, and the Business trading segment. It produces and supplies plastic containers and closures such as lubricant packaging, milk and yoghurt packaging, consumer goods packaging and chemicals liquid packaging, and plastic automotive parts of high quality and with custom designs according to clients' requirements for each of their specific brands.
76GF Score
Get the complete analysis for BKK:PJW-R
Equity-to-Asset is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:PJW-R has been successfully added to your 
