Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
DPM MetalsDPMLF +1.48%63 Equity-to-Asset is 0.85 as of Mar. 2026, which is 4% above its 10-year median of 0.82. GuruFocus rates DPMLF with a GF Score™ of 63/100 and a GF Value™ of $19.71 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 2,669 Metals & Mining companies, DPM Metals ranks better than 56.84% on this metric.
Equity to Asset ratio is calculated as total stockholders equity divided by total asset. DPM Metals's Total Stockholders Equity for the quarter that ended in Mar. 2026 was $2,705 Mil. DPM Metals's Total Assets for the quarter that ended in Mar. 2026 was $3,202 Mil.
Therefore, DPM Metals's Equity to Asset Ratio for the quarter that ended in Mar. 2026 was 0.85.
The historical rank and industry rank for DPM Metals's Equity-to-Asset or its related term are showing as below:
DPMLF'
s Equity-to-Asset Range Over the Past 10 Years
Min: 0.72 Med: 0.82 Max: 0.91
Current: 0.85
During the past 13 years, the highest Equity to Asset Ratio of DPM Metals was 0.91. The lowest was 0.72. And the median was 0.82.
DPMLF's Equity-to-Asset is ranked better than 56.84% of 2669
companies
in the Metals & Mining industry
Industry Median: 0.8
vs DPMLF: 0.85
Equity to Asset ratio can vary greatly across different industries, as they have different capital structure. A company with smaller Equity to Asset ratio (more leveraged) may have higher ROE % because of the leverage.
For banks, the required minimum Equity to Asset ratio by regulation is 5%. Some stronger banks may have Equity to Asset Ratio of more than 10%.
DPM Metals Equity-to-Asset Related Terms
DPM Metals Equity-to-Asset Historical Data
* Premium members only.
The historical data trend for DPM Metals's Equity-to-Asset can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Gold subindustry, DPM Metals's Equity-to-Asset, along with its competitors' market caps and Equity-to-Asset data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
DPM Metals Equity-to-Asset vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, DPM Metals's Equity-to-Asset distribution charts can be found below:
* The bar in red indicates where DPM Metals's Equity-to-Asset falls into.
Equity to Asset ratio measures the ratios of the portion of the asset owned by shareholders out of the total asset. It indicates the leverage of the company, and the amount of debt the company uses in its operation.
Equity to Asset ratio is calculated by dividing total stockholders equity by total asset.
DPM Metals's Equity to Asset Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
DPM Metals (DPMLF) has a Equity-to-Asset of 0.85 as of Mar. 2026. Equity-to-asset ratio equals total company equity divided by total assets. It measures financial leverage. View historical data on DPM Metals and its competitors. This is near median its historical median of 0.82. Over the past decade, DPM Metals' Equity-to-Asset has ranged from 0.72 to 0.91. According to the industry distribution chart, DPM Metals ranks #1152 out of 2669 companies in the Metals & Mining industry, placing it in the top 43.2%.
Is DPM Metals' Equity-to-Asset too high?
DPM Metals' current Equity-to-Asset of 0.85 is near median its 10-year median of 0.82. Over the past 10 years, this metric has ranged from a low of 0.72 to a high of 0.91. The Metals & Mining industry median Equity-to-Asset is 0.80. DPM Metals' value of 0.85 is 6.2% above this industry median. Based on the distribution chart, DPM Metals ranks #1152 out of 2669 companies in the Metals & Mining industry, which is above the industry midpoint. Overall, DPM Metals has a GF Score™ of 63/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does DPM Metals' Equity-to-Asset compare to NEM and AU?
According to the Metals & Mining industry distribution chart, DPM Metals ranks #1152 out of 2669 companies for Equity-to-Asset. This puts DPM Metals in the upper half of its industry. The industry median Equity-to-Asset is 0.80. DPM Metals' value of 0.85 is 6.2% above this benchmark. Historically, DPM Metals' own Equity-to-Asset has ranged from 0.72 to 0.91 over the past decade. While the company's 10-year median is 0.82 vs. the industry median of 0.80, DPM Metals has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Equity-to-Asset for a Metals & Mining company?
The median Equity-to-Asset among Metals & Mining companies is 0.80, based on 2,669 companies in the industry. Companies in the top quartile (top 25%) have a Equity-to-Asset significantly above this median, while those in the bottom quartile fall well below. However, Equity-to-Asset should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. DPM Metals's current Equity-to-Asset of 0.85 is 6.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Equity-to-Asset mean?
A high Equity-to-Asset can signal that a stock is expensive relative to its fundamentals. Equity-to-asset ratio equals total company equity divided by total assets. It measures financial leverage. View historical data on DPM Metals and its competitors. For the Metals & Mining industry, the median Equity-to-Asset is 0.80 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. DPM Metals's current Equity-to-Asset is 0.85, which is near median its own 10-year median of 0.82. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is DPM Metals stock overvalued right now?
Based on GuruFocus' analysis, DPM Metals (DPMLF) is currently considered Significantly Overvalued. The stock's GF Value™ is $19.71, compared to a current price of $36.40 — trading 84.7% above its estimated fair value. The current Equity-to-Asset is 0.85, which is near median its 10-year median of 0.82 and 6.2% above the Metals & Mining industry median of 0.80. DPM Metals' overall GF Score™ is 63/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Equity-to-Asset calculated?
Equity-to-Asset is calculated from a company's financial statements. For DPM Metals (DPMLF), the current Equity-to-Asset is 0.85 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is DPM Metals (DPMLF) Overvalued in 2026?
Based on GuruFocus' analysis, DPM Metals stock appears to be overvalued.
The current stock price of $36.40 is trading 84.7% above its estimated GF Value™ of $19.71.
GuruFocus considers DPM Metals to be Significantly Overvalued.
Key valuation signals for DPMLF:
Equity-to-Asset: 0.85 (near median its 10-year median of 0.82)
GF Value™: $19.71 vs. price of $36.40 (84.7% above fair value)
Industry Position: 6.2% above the Metals & Mining median (#1152 of 2669)
No single metric tells the full story. See the DPMLF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
DPM Metals Inc is an international mining company engaged in the acquisition, exploration, development, mining, and processing of precious metals. The company's projects include are located in Bulgaria, Ecuador, Serbia and Bosnia.
63GF Score
Get the complete analysis for DPMLF
Equity-to-Asset is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
DPMLF has been successfully added to your 
