Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
RBC BearingsRBC +0.11%88 Equity-to-Asset is 0.67 as of Jun. 2026, which is 3% above its 10-year median of 0.65. GuruFocus rates RBC with a GF Score™ of 88/100 and a GF Value™ of $380.31 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 3,077 Industrial Products companies, RBC Bearings ranks better than 68.61% on this metric.
Equity to Asset ratio is calculated as total stockholders equity divided by total asset. RBC Bearings's Total Stockholders Equity for the quarter that ended in Jun. 2026 was $3,462 Mil. RBC Bearings's Total Assets for the quarter that ended in Jun. 2026 was $5,196 Mil.
Therefore, RBC Bearings's Equity to Asset Ratio for the quarter that ended in Jun. 2026 was 0.67.
The historical rank and industry rank for RBC Bearings's Equity-to-Asset or its related term are showing as below:
RBC'
s Equity-to-Asset Range Over the Past 10 Years
Min: 0.48 Med: 0.65 Max: 0.91
Current: 0.67
During the past 13 years, the highest Equity to Asset Ratio of RBC Bearings was 0.91. The lowest was 0.48. And the median was 0.65.
RBC's Equity-to-Asset is ranked better than 68.61% of 3077
companies
in the Industrial Products industry
Industry Median: 0.57
vs RBC: 0.67
Equity to Asset ratio can vary greatly across different industries, as they have different capital structure. A company with smaller Equity to Asset ratio (more leveraged) may have higher ROE % because of the leverage.
For banks, the required minimum Equity to Asset ratio by regulation is 5%. Some stronger banks may have Equity to Asset Ratio of more than 10%.
RBC Bearings Equity-to-Asset Related Terms
RBC Bearings Equity-to-Asset Historical Data
* Premium members only.
The historical data trend for RBC Bearings's Equity-to-Asset can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Tools & Accessories subindustry, RBC Bearings's Equity-to-Asset, along with its competitors' market caps and Equity-to-Asset data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
RBC Bearings Equity-to-Asset vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, RBC Bearings's Equity-to-Asset distribution charts can be found below:
* The bar in red indicates where RBC Bearings's Equity-to-Asset falls into.
Equity to Asset ratio measures the ratios of the portion of the asset owned by shareholders out of the total asset. It indicates the leverage of the company, and the amount of debt the company uses in its operation.
Equity to Asset ratio is calculated by dividing total stockholders equity by total asset.
RBC Bearings's Equity to Asset Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
RBC Bearings (RBC) has a Equity-to-Asset of 0.67 as of Jun. 2026. Equity-to-asset ratio equals total company equity divided by total assets. It measures financial leverage. View historical data on RBC Bearings and its competitors. This is near median its historical median of 0.65. Over the past decade, RBC Bearings' Equity-to-Asset has ranged from 0.48 to 0.91. According to the industry distribution chart, RBC Bearings ranks #966 out of 3077 companies in the Industrial Products industry, placing it in the top 31.4%.
Is RBC Bearings' Equity-to-Asset too high?
RBC Bearings' current Equity-to-Asset of 0.67 is near median its 10-year median of 0.65. Over the past 10 years, this metric has ranged from a low of 0.48 to a high of 0.91. The Industrial Products industry median Equity-to-Asset is 0.57. RBC Bearings' value of 0.67 is 17.5% above this industry median. Based on the distribution chart, RBC Bearings ranks #966 out of 3077 companies in the Industrial Products industry, which is above the industry midpoint. Overall, RBC Bearings has a GF Score™ of 88/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does RBC Bearings' Equity-to-Asset compare to SNA and SWK?
According to the Industrial Products industry distribution chart, RBC Bearings ranks #966 out of 3077 companies for Equity-to-Asset. This puts RBC Bearings in the upper half of its industry. The industry median Equity-to-Asset is 0.57. RBC Bearings' value of 0.67 is 17.5% above this benchmark. Historically, RBC Bearings' own Equity-to-Asset has ranged from 0.48 to 0.91 over the past decade. While the company's 10-year median is 0.65 vs. the industry median of 0.57, RBC Bearings has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Equity-to-Asset for an Industrial Products company?
The median Equity-to-Asset among Industrial Products companies is 0.57, based on 3,077 companies in the industry. Companies in the top quartile (top 25%) have a Equity-to-Asset significantly above this median, while those in the bottom quartile fall well below. However, Equity-to-Asset should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. RBC Bearings's current Equity-to-Asset of 0.67 is 17.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Equity-to-Asset mean?
A high Equity-to-Asset can signal that a stock is expensive relative to its fundamentals. Equity-to-asset ratio equals total company equity divided by total assets. It measures financial leverage. View historical data on RBC Bearings and its competitors. For the Industrial Products industry, the median Equity-to-Asset is 0.57 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. RBC Bearings's current Equity-to-Asset is 0.67, which is near median its own 10-year median of 0.65. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is RBC Bearings stock overvalued right now?
Based on GuruFocus' analysis, RBC Bearings (RBC) is currently considered Significantly Overvalued. The stock's GF Value™ is $380.31, compared to a current price of $567.25 — trading 49.2% above its estimated fair value. The current Equity-to-Asset is 0.67, which is near median its 10-year median of 0.65 and 17.5% above the Industrial Products industry median of 0.57. RBC Bearings' overall GF Score™ is 88/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Equity-to-Asset calculated?
Equity-to-Asset is calculated from a company's financial statements. For RBC Bearings (RBC), the current Equity-to-Asset is 0.67 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is RBC Bearings (RBC) Overvalued in 2026?
Based on GuruFocus' analysis, RBC Bearings stock appears to be overvalued.
The current stock price of $567.25 is trading 49.2% above its estimated GF Value™ of $380.31.
GuruFocus considers RBC Bearings to be Significantly Overvalued.
Key valuation signals for RBC:
Equity-to-Asset: 0.67 (near median its 10-year median of 0.65)
GF Value™: $380.31 vs. price of $567.25 (49.2% above fair value)
Industry Position: 17.5% above the Industrial Products median (#966 of 3077)
No single metric tells the full story. See the RBC stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
RBC Bearings is an international manufacturer and marketer of engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. The offering includes plain bearings, roller bearings, ball bearings, and engineered products. The company has two reportable segments: industrial, which generates the most revenue, and aerospace and defense. The A&D segment represents the end markets for the company's engineered bearings and precision components used in commercial aerospace, defense aerospace, and sea and ground defense applications; and the industrial segment represents the end markets for its products used in various industrial applications. Geographically, the company generates a majority of its revenue from the United States.
88GF Score
Get the complete analysis for RBC
Equity-to-Asset is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
RBC has been successfully added to your 
