Datron AGHAM:DAR +2.76%44 EV-to-FCF is -4.25 as of Jul. 03, 2026. GuruFocus rates HAM:DAR with a GF Score™ of 44/100 and a GF Value™ of €0.50 (Significantly Overvalued). The stock has 9 warning signs investors should review. Among 1,727 Industrial Products companies, Datron AG ranks worse than 57903.82% on this metric.
EV-to-FCF is calculated as enterprise value divided by its free cash flow. As of today, Datron AG's Enterprise Value is €55.91 Mil.
Datron AG's Free Cash Flow for the trailing twelve months (TTM) ended in Jun. 2025 was €-13.16 Mil. Therefore, Datron AG's EV-to-FCF for today is -4.25.
The historical rank and industry rank for Datron AG's EV-to-FCF or its related term are showing as below:
HAM:DAR'
s EV-to-FCF Range Over the Past 10 Years
Min: -356.34 Med: -2.88 Max: 50.6
Current: -4.25
During the past 13 years, the highest EV-to-FCF of Datron AG was 50.60. The lowest was -356.34. And the median was -2.88.
HAM:DAR's EV-to-FCF is ranked worse than 100% of 1727
companies
in the Industrial Products industry
Industry Median: 26.06
vs HAM:DAR: -4.25
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Datron AG's share price for today is €7.45.
For company reported semi-annually, GuruFocus uses latest annual data as the TTM data. Datron AG's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Jun. 2025 was €0.275.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Enterprise Value is used because it is a more complete measure in reflecting how much an investor pays when buying a company. Free Cash Flow is an important financial metric because it represents the actual amount of cash at a company's disposal. Companies with a low EV-to-FCF ratio, combined with a strong balance sheet are generally considered as undervalued.
Datron AG EV-to-FCF Related Terms
Datron AG EV-to-FCF Historical Data
* Premium members only.
The historical data trend for Datron AG's EV-to-FCF can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Datron AG's EV-to-FCF, along with its competitors' market caps and EV-to-FCF data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Datron AG EV-to-FCF vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Datron AG's EV-to-FCF distribution charts can be found below:
* The bar in red indicates where Datron AG's EV-to-FCF falls into.
Datron AG's current Enterprise Value is €55.91 Mil.
For company reported semi-annually, GuruFocus uses latest annual data as the TTM data. Datron AG's Free Cash Flow for the trailing twelve months (TTM) ended in Jun. 2025 was €-13.16 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Datron AG (HAM:DAR) has a EV-to-FCF of -4.25 as of Jul. 03, 2026. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Datron AG and its competitors. According to the industry distribution chart, Datron AG ranks #999999 out of 1727 companies in the Industrial Products industry.
Is Datron AG's EV-to-FCF too high?
Datron AG's current EV-to-FCF is -4.25. Based on the distribution chart, Datron AG ranks #999999 out of 1727 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Datron AG has a GF Score™ of 44/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Datron AG's EV-to-FCF compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Datron AG ranks #999999 out of 1727 companies for EV-to-FCF. This places Datron AG in the lower half of its industry. The industry median EV-to-FCF is 26.06. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-FCF for an Industrial Products company?
The median EV-to-FCF among Industrial Products companies is 26.06, based on 1,727 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-FCF significantly above this median, while those in the bottom quartile fall well below. However, EV-to-FCF should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-FCF mean?
A high EV-to-FCF can signal that a stock is expensive relative to its fundamentals. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Datron AG and its competitors. For the Industrial Products industry, the median EV-to-FCF is 26.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Datron AG's current EV-to-FCF is -4.25. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Datron AG stock overvalued right now?
Based on GuruFocus' analysis, Datron AG (HAM:DAR) is currently considered Significantly Overvalued. The stock's GF Value™ is €0.50, compared to a current price of €7.45 — trading 1390% above its estimated fair value. The current EV-to-FCF is -4.25. Datron AG's overall GF Score™ is 44/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-FCF calculated?
EV-to-FCF is calculated from a company's financial statements. For Datron AG (HAM:DAR), the current EV-to-FCF is -4.25 as of Jul. 03, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Datron AG (HAM:DAR) Overvalued in 2026?
Based on GuruFocus' analysis, Datron AG stock appears to be overvalued.
The current stock price of €7.45 is trading 1390% above its estimated GF Value™ of €0.50.
GuruFocus considers Datron AG to be Significantly Overvalued.
Key valuation signals for HAM:DAR:
EV-to-FCF: -4.25
GF Value™: €0.50 vs. price of €7.45 (1390% above fair value)
No single metric tells the full story. See the HAM:DAR stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Datron AG group specializes in the development, production, and sale of high-speed CNC milling machines, dental milling machines, high-performance dosing machines, milling tools as well as device-specific software and after-sales services specialized. DATRON high-speed CNC milling machines are particularly suitable for processing future-oriented materials such as aluminum and composite materials. The dental milling machines ensure efficient processing of all common denture materials in dental laboratories. The high-performance metering machines are ideal for industrial sealing and adhesive applications.
44GF Score
Get the complete analysis for HAM:DAR
EV-to-FCF is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
HAM:DAR has been successfully added to your 
