Anyang Iron & Steel (SHSE:600569) FCF Margin %: -17.55% (As of Mar. 2026)

What is Anyang Iron & Steel FCF Margin %?

Anyang Iron & Steel SHSE:600569 +1.21% 49 FCF Margin % is -17.55% as of Mar. 2026. GuruFocus rates SHSE:600569 with a GF Score™ of 49/100 and a GF Value™ of ¥1.64 (Fairly Valued). The stock has 3 warning signs investors should review. Among 613 Steel companies, Anyang Iron & Steel ranks worse than 70.8% on this metric.

FCF Margin % is calculated as Free Cash Flow divided by its Revenue. Anyang Iron & Steel's Free Cash Flow for the three months ended in Mar. 2026 was ¥-1,239 Mil. Anyang Iron & Steel's Revenue for the three months ended in Mar. 2026 was ¥7,061 Mil. Therefore, Anyang Iron & Steel's FCF Margin % for the quarter that ended in Mar. 2026 was -17.55%.

As of today, Anyang Iron & Steel's current FCF Yield % is -24.72%.

The historical rank and industry rank for Anyang Iron & Steel's FCF Margin % or its related term are showing as below:

SHSE:600569' s FCF Margin % Range Over the Past 10 Years
Min: -8.39 Med: 1.82 Max: 12.23
Current: -4

During the past 13 years, the highest FCF Margin % of Anyang Iron & Steel was 12.23%. The lowest was -8.39%. And the median was 1.82%.

SHSE:600569's FCF Margin % is ranked worse than
70.8% of 613 companies
in the Steel industry
Industry Median: 1.06 vs SHSE:600569: -4.00

Anyang Iron & Steel FCF Margin % Related Terms

Anyang Iron & Steel FCF Margin % Historical Data

* Premium members only.

The historical data trend for Anyang Iron & Steel's FCF Margin % can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Anyang Iron & Steel FCF Margin % Chart

Anyang Iron & Steel Annual Data

Trend

Dec16

Dec17

Dec18

Dec19

Dec20

Dec21

Dec22

Dec23

Dec24

Dec25

FCF Margin %

Get a 7-Day Free Trial

1.82

-2.86

2.97

-8.39

-0.59

Anyang Iron & Steel Quarterly Data
	Jun21	Sep21	Dec21	Mar22	Jun22	Sep22	Dec22	Mar23	Jun23	Sep23	Dec23	Mar24	Jun24	Sep24	Dec24	Mar25	Jun25	Sep25	Dec25	Mar26
FCF Margin %	Get a 7-Day Free Trial															-3.09	-2.16	11.21	-9.61	-17.55

SHSE:600569 vs NUE, STLD, RS: FCF Margin % Comparison

For the Steel subindustry, Anyang Iron & Steel's FCF Margin %, along with its competitors' market caps and FCF Margin % data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Anyang Iron & Steel FCF Margin % vs Steel Industry

For the Steel industry and Basic Materials sector, Anyang Iron & Steel's FCF Margin % distribution charts can be found below:

* The bar in red indicates where Anyang Iron & Steel's FCF Margin % falls into.

Save Embed

49GF Score

Anyang Iron & Steel Inc SHSE:600569

FCF Margin % is just one metric. See GF Score™, valuation, warning signs, and more.

View Full Analysis

Anyang Iron & Steel FCF Margin % Calculation

FCF margin is the ratio of Free Cash Flow divided by net sales or Revenue, usually presented in percent.

Anyang Iron & Steel's FCF Margin for the fiscal year that ended in Dec. 2025 is calculated as

FCF Margin	=	Free Cash Flow (A: Dec. 2025 )	/	Revenue (A: Dec. 2025 )
	=	-176.313	/	29993.647
	=	-0.59 %

Anyang Iron & Steel's FCF Margin for the quarter that ended in Mar. 2026 is calculated as

FCF Margin	=	Free Cash Flow (Q: Mar. 2026 )	/	Revenue (Q: Mar. 2026 )
	=	-1239.271	/	7060.78
	=	-17.55 %

Frequently Asked Questions Learn more about FCF Margin % →

What does a FCF Margin % of -17.55% mean?

Anyang Iron & Steel (SHSE:600569) has a FCF Margin % of -17.55% as of Mar. 2026. Free cash flow margin is the ratio of total free cash flow to net sales. View historical data on Anyang Iron & Steel and its competitors. According to the industry distribution chart, Anyang Iron & Steel ranks #434 out of 613 companies in the Steel industry, placing it in the top 70.8%.

Is Anyang Iron & Steel's FCF Margin % too high?

Anyang Iron & Steel's current FCF Margin % is -17.55%. Based on the distribution chart, Anyang Iron & Steel ranks #434 out of 613 companies in the Steel industry, which is below the industry midpoint. Overall, Anyang Iron & Steel has a GF Score™ of 49/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.

How does Anyang Iron & Steel's FCF Margin % compare to NUE and STLD?

According to the Steel industry distribution chart, Anyang Iron & Steel ranks #434 out of 613 companies for FCF Margin %. This places Anyang Iron & Steel in the lower half of its industry. The industry median FCF Margin % is 1.06. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.

What is a good FCF Margin % for a Steel company?

The median FCF Margin % among Steel companies is 1.06, based on 613 companies in the industry. Companies in the top quartile (top 25%) have a FCF Margin % significantly above this median, while those in the bottom quartile fall well below. However, FCF Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.

What does a high FCF Margin % mean?

A high FCF Margin % can signal that a stock is expensive relative to its fundamentals. Free cash flow margin is the ratio of total free cash flow to net sales. View historical data on Anyang Iron & Steel and its competitors. For the Steel industry, the median FCF Margin % is 1.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Anyang Iron & Steel's current FCF Margin % is -17.55%. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.

Is Anyang Iron & Steel stock overvalued right now?

Based on GuruFocus' analysis, Anyang Iron & Steel (SHSE:600569) is currently considered Fairly Valued. The stock's GF Value™ is ¥1.64, compared to a current price of ¥1.67 — trading 1.8% above its estimated fair value. The current FCF Margin % is -17.55%. Anyang Iron & Steel's overall GF Score™ is 49/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.

How is FCF Margin % calculated?

FCF Margin % is calculated from a company's financial statements. For Anyang Iron & Steel (SHSE:600569), the current FCF Margin % is -17.55% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Anyang Iron & Steel (SHSE:600569) Overvalued in 2026?

Based on GuruFocus' analysis, Anyang Iron & Steel stock appears to be overvalued. The current stock price of ¥1.67 is trading 1.8% above its estimated GF Value™ of ¥1.64. GuruFocus considers Anyang Iron & Steel to be Fairly Valued.

Key valuation signals for SHSE:600569:

FCF Margin %: -17.55%
GF Value™: ¥1.64 vs. price of ¥1.67 (1.8% above fair value)
GF Score™: 49/100 with 3 warning signs

No single metric tells the full story. See the SHSE:600569 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.

Anyang Iron & Steel Business Description

Industry Basic Materials Steel

Comparable Companies SZSE:000717 SHSE:600231 SHSE:605050 SHSE:603315 SZSE:002418 SZSE:002443 SZSE:300881 SHSE:600784 SZSE:300421 SHSE:688186 NUE XAMS:MT STLD BOM:500228 NSE:TATASTEEL RS TSE:5401 SHSE:600019 XKRX:005490 SHSE:600010

Address Meiyuanzhuang, Tiexi District, Anyang, Henan, CHN, 455004

Website http://www.aysteel.com.cn

Anyang Iron & Steel Inc is engaged in steel integrating coking, sintering, smelting, rolling materials and scientific research and development. It produces medium and heavy plates, furnace coils, hot rolled coils, high-speed wires, small and medium-sized materials.

49GF Score

Get the complete analysis for SHSE:600569

FCF Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

¥1.67

Price

¥1.64

GF Value

View SHSE:600569 Analysis

See FCF Margin % data for all stocks →