What is Usinas Siderurgicas de Minas Gerais FCF Yield %?
Usinas Siderurgicas de Minas GeraisXMAD:XUSIO 48 FCF Yield % is 17.50 as of Jun. 26, 2026, which is 340% above its 10-year median of 3.98. GuruFocus rates XMAD:XUSIO with a GF Score™ of 48/100 and a GF Value™ of €0.98 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 636 Steel companies, Usinas Siderurgicas de Minas Gerais ranks better than 85.38% on this metric.
FCF Yield % is calculated as Free Cash Flow divided by Market Capitalization. It is a financial solvency ratio that compares the free cash flow a company is expected to earn against its market value.
Usinas Siderurgicas de Minas Gerais FCF Yield % Explanation
Similar to Earnings Yield %, FCF Yield % is financial solvency ratio. A lower ratio suggests a less attractive investment, indicating that investors might not receive substantial returns in proportion to their investment. Conversely, a high free cash flow yield signals that a company generates sufficient cash to comfortably meet its debts, obligations, and dividend payments, making it a promising investment choice.
Usinas Siderurgicas de Minas Gerais FCF Yield % Related Terms
Usinas Siderurgicas de Minas Gerais FCF Yield % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Usinas Siderurgicas de Minas Gerais FCF Yield % Chart
XMAD:XUSIO vs NUE, STLD, RS: FCF Yield % Comparison
For the Steel subindustry, Usinas Siderurgicas de Minas Gerais's FCF Yield %, along with its competitors' market caps and FCF Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Usinas Siderurgicas de Minas Gerais FCF Yield % vs Steel Industry
For the Steel industry and Basic Materials sector, Usinas Siderurgicas de Minas Gerais's FCF Yield % distribution charts can be found below:
* The bar in red indicates where Usinas Siderurgicas de Minas Gerais's FCF Yield % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Usinas Siderurgicas de Minas Gerais (XMAD:XUSIO) has a FCF Yield % of 17.50 as of Jun. 26, 2026. FCF Yield is calculated as Free Cash Flow divided by Market Capitalization. View historical data on Usinas Siderurgicas de Minas Gerais and its competitors. This is 340% above median its historical median of 3.98. According to the industry distribution chart, Usinas Siderurgicas de Minas Gerais ranks #93 out of 636 companies in the Steel industry, placing it in the top 14.6%.
Is Usinas Siderurgicas de Minas Gerais' FCF Yield % too high?
Usinas Siderurgicas de Minas Gerais' current FCF Yield % of 17.50 is 340% above median its 10-year median of 3.98. The Steel industry median FCF Yield % is 1.33. Usinas Siderurgicas de Minas Gerais' value of 17.50 is 1215.8% above this industry median. Based on the distribution chart, Usinas Siderurgicas de Minas Gerais ranks #93 out of 636 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Usinas Siderurgicas de Minas Gerais has a GF Score™ of 48/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Usinas Siderurgicas de Minas Gerais' FCF Yield % compare to NUE and STLD?
According to the Steel industry distribution chart, Usinas Siderurgicas de Minas Gerais ranks #93 out of 636 companies for FCF Yield %. This places Usinas Siderurgicas de Minas Gerais in the top 15% of its industry — outperforming the majority of peers. The industry median FCF Yield % is 1.33. Usinas Siderurgicas de Minas Gerais' value of 17.50 is 1215.8% above this benchmark. While the company's 10-year median is 3.98 vs. the industry median of 1.33, Usinas Siderurgicas de Minas Gerais has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good FCF Yield % for a Steel company?
The median FCF Yield % among Steel companies is 1.33, based on 636 companies in the industry. Companies in the top quartile (top 25%) have a FCF Yield % significantly above this median, while those in the bottom quartile fall well below. However, FCF Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Usinas Siderurgicas de Minas Gerais's current FCF Yield % of 17.50 is 1215.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high FCF Yield % mean?
A high FCF Yield % can signal that a stock is expensive relative to its fundamentals. FCF Yield is calculated as Free Cash Flow divided by Market Capitalization. View historical data on Usinas Siderurgicas de Minas Gerais and its competitors. For the Steel industry, the median FCF Yield % is 1.33 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Usinas Siderurgicas de Minas Gerais's current FCF Yield % is 17.50, which is 340% above median its own 10-year median of 3.98. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Usinas Siderurgicas de Minas Gerais stock overvalued right now?
Based on GuruFocus' analysis, Usinas Siderurgicas de Minas Gerais (XMAD:XUSIO) is currently considered Significantly Overvalued. The stock's GF Value™ is €0.98, compared to a current price of €1.34 — trading 36.7% above its estimated fair value. The current FCF Yield % is 17.50, which is 340% above median its 10-year median of 3.98 and 1215.8% above the Steel industry median of 1.33. Usinas Siderurgicas de Minas Gerais' overall GF Score™ is 48/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is FCF Yield % calculated?
FCF Yield % is calculated from a company's financial statements. For Usinas Siderurgicas de Minas Gerais (XMAD:XUSIO), the current FCF Yield % is 17.50 as of Jun. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Usinas Siderurgicas de Minas Gerais (XMAD:XUSIO) Overvalued in 2026?
Based on GuruFocus' analysis, Usinas Siderurgicas de Minas Gerais stock appears to be overvalued.
The current stock price of €1.34 is trading 36.7% above its estimated GF Value™ of €0.98.
GuruFocus considers Usinas Siderurgicas de Minas Gerais to be Significantly Overvalued.
Key valuation signals for XMAD:XUSIO:
FCF Yield %: 17.50 (340% above median its 10-year median of 3.98)
GF Value™: €0.98 vs. price of €1.34 (36.7% above fair value)
Industry Position: 1215.8% above the Steel median (#93 of 636)
No single metric tells the full story. See the XMAD:XUSIO stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Usinas Siderurgicas de Minas Gerais Business Description
Usinas Siderurgicas de Minas Gerais SA is a Brazil-based company engaged in producing and distributing flat steel products. The company's product portfolio comprises ordinary heavy plates, Sincron series premium heavy plates, hot strips, cold-rolled, and galvanized products. These products are used in automotive, civil construction, railway, electric, white goods, offshore platforms, and agricultural and construction machinery. The Brazilian domestic market represents the majority of the company's sales, while the United States, Argentina, and Turkey are the export destination markets for the company.
48GF Score
Get the complete analysis for XMAD:XUSIO
FCF Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XMAD:XUSIO has been successfully added to your 
