Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Sanoh Industrial Co (TSE:6584) Forward PE Ratio Explanation
The Forward PE Ratio of a company is often used to compare current earnings to estimated future earnings, as well as gaining a clearer picture of what earnings will look like without charges and other accounting adjustments. If earnings are expected to grow in the future, the Forward PE Ratio will be lower than the current PE Ratio. This measure is also used to compare one company to another with a forward-looking focus.
Trailing PE Ratio relies on what is already done. It uses the current share price and divides by the total EPS (Basic) over the past 12 months. PE Ratio can be affected by Non Operating Income such as the sale of part of businesses. This may increase for the current year or quarter dramatically. But it cannot be repeated over and over. Therefore PE Ratio without NRI is a more accurate indication of valuation than PE Ratio .
Sanoh Industrial Co Forward PE Ratio Related Terms
Sanoh Industrial Co Forward PE Ratio Historical Data
* Premium members only.
The historical data trend for Sanoh Industrial Co's Forward PE Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Sanoh Industrial Co Forward PE Ratio Chart
Sanoh Industrial Co Annual Data
Trend
2025-03
2026-03
Forward PE Ratio
6.13
8.28
Sanoh Industrial Co Quarterly Data
2025-03
2025-06
2025-09
2025-12
2026-03
2026-06
Forward PE Ratio
6.13
7.18
16.28
12.15
8.28
11.70
TSE:6584 vs ORLY, AZO: Forward PE Ratio Comparison
For the Auto Parts subindustry, Sanoh Industrial Co's Forward PE Ratio, along with its competitors' market caps and Forward PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sanoh Industrial Co Forward PE Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Sanoh Industrial Co's Forward PE Ratio distribution charts can be found below:
* The bar in red indicates where Sanoh Industrial Co's Forward PE Ratio falls into.
It's a measure of the price-to-earnings ratio (PE Ratio) using forecasted earnings for the calculation. While the earnings used are just an estimate and are not as reliable as current earnings data, there is still benefit in estimated P/E analysis. The forecasted earnings used in the formula can either be for the next 12 months or for the next full-year fiscal period.
Sanoh Industrial Co (TSE:6584) has a Forward PE Ratio of 9.45 as of Aug. 17, 2026. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Sanoh Industrial Co and its competitors. According to the industry distribution chart, Sanoh Industrial Co ranks #162 out of 599 companies in the Vehicles & Parts industry, placing it in the top 27%.
Is Sanoh Industrial Co's Forward PE Ratio too high?
Sanoh Industrial Co's current Forward PE Ratio is 9.45. The Vehicles & Parts industry median Forward PE Ratio is 14.02. Sanoh Industrial Co's value of 9.45 is 32.6% below this industry median. Based on the distribution chart, Sanoh Industrial Co ranks #162 out of 599 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, Sanoh Industrial Co has a GF Score™ of 77/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sanoh Industrial Co's Forward PE Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Sanoh Industrial Co ranks #162 out of 599 companies for Forward PE Ratio. This puts Sanoh Industrial Co in the upper half of its industry. The industry median Forward PE Ratio is 14.02. Sanoh Industrial Co's value of 9.45 is 32.6% below this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Forward PE Ratio for a Vehicles & Parts company?
The median Forward PE Ratio among Vehicles & Parts companies is 14.02, based on 599 companies in the industry. Companies in the top quartile (top 25%) have a Forward PE Ratio significantly above this median, while those in the bottom quartile fall well below. However, Forward PE Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sanoh Industrial Co's current Forward PE Ratio of 9.45 is 32.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Forward PE Ratio mean?
A high Forward PE Ratio can signal that a stock is expensive relative to its fundamentals. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Sanoh Industrial Co and its competitors. For the Vehicles & Parts industry, the median Forward PE Ratio is 14.02 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sanoh Industrial Co's current Forward PE Ratio is 9.45. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sanoh Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Sanoh Industrial Co (TSE:6584) is currently considered Fairly Valued. The stock's GF Value™ is 円899.36, compared to a current price of 円822.00 — trading 8.6% below its estimated fair value. The current Forward PE Ratio is 9.45 and 32.6% below the Vehicles & Parts industry median of 14.02. Sanoh Industrial Co's overall GF Score™ is 77/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Forward PE Ratio calculated?
Forward PE Ratio is calculated from a company's financial statements. For Sanoh Industrial Co (TSE:6584), the current Forward PE Ratio is 9.45 as of Aug. 17, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sanoh Industrial Co (TSE:6584) Overvalued in 2026?
Based on GuruFocus' analysis, Sanoh Industrial Co stock appears to be undervalued.
The current stock price of 円822.00 is trading 8.6% below its estimated GF Value™ of 円899.36.
GuruFocus considers Sanoh Industrial Co to be Fairly Valued.
Key valuation signals for TSE:6584:
Forward PE Ratio: 9.45
GF Value™: 円899.36 vs. price of 円822.00 (8.6% below fair value)
Industry Position: 32.6% below the Vehicles & Parts median (#162 of 599)
No single metric tells the full story. See the TSE:6584 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sanoh Industrial Co Ltd operates as an automotive parts manufacturing company in Japan. It is engaged in the manufacture and distribution of tubular products for automobiles and transportation equipment, and automotive plastic products. Its products portfolio includes brazed steel tubing, welded steel tubing, stainless steel tubing, fuel injection rails, mono-layer tubing, multi-layer tubing, various fluid handling systems, quick connectors, and aluminum pipe.
77GF Score
Get the complete analysis for TSE:6584
Forward PE Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6584 has been successfully added to your 
