Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Sharp Chucks and MachinesNSE:SCML +1.10%12 Graham Number is ₹104.74 as of Mar. 2025, which is 100% below its 10-year median of 0.88. GuruFocus rates NSE:SCML with a GF Score™ of 12/100. The stock has 2 warning signs investors should review. Among 2,200 Industrial Products companies, Sharp Chucks and Machines ranks better than 85.27% on this metric.
Graham Number is a figure that measures a stock's fundamental value by taking into account the company's earnings per share and book value per share. The Graham number is the upper bound of the price range that a defensive investor should pay for the stock. According to the theory, any stock price below the Graham number is considered undervalued, and thus worth investing in.
The historical rank and industry rank for Sharp Chucks and Machines's Graham Number or its related term are showing as below:
NSE:SCML'
s Price-to-Graham-Number Range Over the Past 10 Years
Min: 0.74 Med: 0.88 Max: 0.93
Current: 0.74
During the past 5 years, the highest Price to Graham Number ratio of Sharp Chucks and Machines was 0.93. The lowest was 0.74. And the median was 0.88.
NSE:SCML's Price-to-Graham-Number is ranked better than 85.27% of 2200
companies
in the Industrial Products industry
Industry Median: 1.76
vs NSE:SCML: 0.74
Graham Number is a combination of asset valuation and earnings power valuation. It is a very conservative way of valuing a stock.
Sharp Chucks and Machines (NSE:SCML) Graham Number Explanation
Ben Graham actually did not publish a formula like this. But he wrote in The Intelligent Investor (1948 version) regarding to the criteria for purchases:
Current price should not be more than 15 times average earnings of the past three years.
Current price should not be more than 1.5 times the book value last reported. However, a multiplier of earnings below 15 could justify a correspondingly higher multiplier of assets. As a rule of thumb we suggest that the product of the multiplier times the ratio of price to book value should not exceed 22.5. (This figure corresponds to 15 times earnings and 1.5 times book value. It would admit an issue selling at only 9 times earnings and 2.5 times asset value, etc.)
Unlike valuation methods such as DCF or Discounted Earnings, the Graham number does not take growth into the valuation. Unlike the valuation methods based on book value alone, it takes into account the earnings power. Therefore, the Graham Number is a combination of asset valuation and earnings power valuation.
In general, the Graham number is a very conservative way of valuing a stock. It cannot be applied to companies with negative book values.
Sharp Chucks and Machines's Price to Graham number Ratio for today is calculated as
Price to Graham number
=
Share Price (Today)
/
Graham number (Q: Mar. 2025 )
=
78.00
/
104.74
=
0.74
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Please keep these in mind:
1. Graham Number does not take growth into account. Therefore it underestimates the values of the companies that have good earnings growth. We feel that if the earnings per share grows more than 10% a year, Graham Number underestimates the value.
2. Graham Number punishes the companies that have temporarily low earnings. Therefore, an average of earnings makes more sense in the calculation of Graham Number.
3. Graham Numbers underestimates companies that are light with book.
Sharp Chucks and Machines Graham Number Related Terms
Sharp Chucks and Machines Graham Number Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Sharp Chucks and Machines Graham Number Chart
Sharp Chucks and Machines Annual Data
Trend
Mar21
Mar22
Mar23
Mar24
Mar25
Graham Number
52.36
64.43
69.24
80.47
104.74
Sharp Chucks and Machines Semi-Annual Data
Mar21
Mar22
Mar23
Mar24
Mar25
Graham Number
0.00
64.43
69.24
80.47
104.74
NSE:SCML vs GEV, ETN, PH: Graham Number Comparison
For the Specialty Industrial Machinery subindustry, Sharp Chucks and Machines's Price-to-Graham-Number, along with its competitors' market caps and Price-to-Graham-Number data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sharp Chucks and Machines Price-to-Graham-Number vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Sharp Chucks and Machines's Price-to-Graham-Number distribution charts can be found below:
* The bar in red indicates where Sharp Chucks and Machines's Price-to-Graham-Number falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Sharp Chucks and Machines (NSE:SCML) has a Graham Number of ₹104.74 as of Mar. 2025. The Graham Number values a company based on its per-share earnings and book value. View historical data on Sharp Chucks and Machines and its competitors. This is 11802% above median its historical median of 0.88. Over the past decade, Sharp Chucks and Machines' Graham Number has ranged from 0.74 to 0.93. According to the industry distribution chart, Sharp Chucks and Machines ranks #324 out of 2200 companies in the Industrial Products industry, placing it in the top 14.7%.
Is Sharp Chucks and Machines' Graham Number too high?
Sharp Chucks and Machines' current Graham Number of ₹104.74 is 11802% above median its 10-year median of 0.88. Over the past 10 years, this metric has ranged from a low of 0.74 to a high of 0.93. Based on the distribution chart, Sharp Chucks and Machines ranks #324 out of 2200 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Sharp Chucks and Machines has a GF Score™ of 12/100, reflecting its overall financial health beyond just this single metric.
How does Sharp Chucks and Machines' Graham Number compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Sharp Chucks and Machines ranks #324 out of 2200 companies for Graham Number. This places Sharp Chucks and Machines in the top 15% of its industry — outperforming the majority of peers. The industry median Graham Number is 1.76. Historically, Sharp Chucks and Machines' own Graham Number has ranged from 0.74 to 0.93 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Graham Number for an Industrial Products company?
The median Graham Number among Industrial Products companies is 1.76, based on 2,200 companies in the industry. Companies in the top quartile (top 25%) have a Graham Number significantly above this median, while those in the bottom quartile fall well below. However, Graham Number should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Graham Number mean?
A high Graham Number can signal that a stock is expensive relative to its fundamentals. The Graham Number values a company based on its per-share earnings and book value. View historical data on Sharp Chucks and Machines and its competitors. For the Industrial Products industry, the median Graham Number is 1.76 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sharp Chucks and Machines's current Graham Number is ₹104.74, which is 11802% above median its own 10-year median of 0.88. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sharp Chucks and Machines stock overvalued right now?
Sharp Chucks and Machines (NSE:SCML) has a current Graham Number of ₹104.74. The current Graham Number is ₹104.74, which is 11802% above median its 10-year median of 0.88. Sharp Chucks and Machines' overall GF Score™ is 12/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Graham Number calculated?
Graham Number is calculated from a company's financial statements. For Sharp Chucks and Machines (NSE:SCML), the current Graham Number is ₹104.74 as of Mar. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Sharp Chucks and Machines Ltd is engaged in manufacturing forging products, casting products, and machined components, which have applications in tractors, automobiles, material handling and earth-moving equipment, railways, defense, machine tools, DIY industry, etc. Its product portfolio comprises back plates, spare studs, drill chucks, spare cam locks, lathe chucks, and power chucks, among others. The company also manufactures customized components as per customer-specific requirements and uses. Geographically, the company derives the majority of its revenue from its business in India, and also has some exposure to markets outside India.
12GF Score
Get the complete analysis for NSE:SCML
Graham Number is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SCML has been successfully added to your 
