Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Standard IndustriesNSE:SIL +0.41%63 Graham Number is ₹N/A as of Mar. 2026. GuruFocus rates NSE:SIL with a GF Score™ of 63/100 and a GF Value™ of ₹33.44 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 718 Manufacturing - Apparel & Accessories companies, Standard Industries ranks worse than 139275.63% on this metric.
Graham Number is a figure that measures a stock's fundamental value by taking into account the company's earnings per share and book value per share. The Graham number is the upper bound of the price range that a defensive investor should pay for the stock. According to the theory, any stock price below the Graham number is considered undervalued, and thus worth investing in.
As of today (2026-08-10), the stock price of Standard Industries is ₹17.09. Standard Industries's graham number for the quarter that ended in Mar. 2026 was ₹N/A. Therefore, Standard Industries's Price to Graham Number ratio for today is N/A.
The historical rank and industry rank for Standard Industries's Graham Number or its related term are showing as below:
During the past 13 years, the highest Price to Graham Number ratio of Standard Industries was 1.81. The lowest was 0.10. And the median was 0.98.
NSE:SIL's Price-to-Graham-Number is not ranked *
in the Manufacturing - Apparel & Accessories industry.
Industry Median: 1.06 * Ranked among companies with meaningful Price-to-Graham-Number only.
Graham Number is a combination of asset valuation and earnings power valuation. It is a very conservative way of valuing a stock.
Standard Industries (NSE:SIL) Graham Number Explanation
Ben Graham actually did not publish a formula like this. But he wrote in The Intelligent Investor (1948 version) regarding to the criteria for purchases:
Current price should not be more than 15 times average earnings of the past three years.
Current price should not be more than 1.5 times the book value last reported. However, a multiplier of earnings below 15 could justify a correspondingly higher multiplier of assets. As a rule of thumb we suggest that the product of the multiplier times the ratio of price to book value should not exceed 22.5. (This figure corresponds to 15 times earnings and 1.5 times book value. It would admit an issue selling at only 9 times earnings and 2.5 times asset value, etc.)
Unlike valuation methods such as DCF or Discounted Earnings, the Graham number does not take growth into the valuation. Unlike the valuation methods based on book value alone, it takes into account the earnings power. Therefore, the Graham Number is a combination of asset valuation and earnings power valuation.
In general, the Graham number is a very conservative way of valuing a stock. It cannot be applied to companies with negative book values.
Standard Industries's Price to Graham number Ratio for today is calculated as
Price to Graham number
=
Share Price (Today)
/
Graham number (Q: Mar. 2026 )
=
17.09
/
N/A
=
N/A
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Please keep these in mind:
1. Graham Number does not take growth into account. Therefore it underestimates the values of the companies that have good earnings growth. We feel that if the earnings per share grows more than 10% a year, Graham Number underestimates the value.
2. Graham Number punishes the companies that have temporarily low earnings. Therefore, an average of earnings makes more sense in the calculation of Graham Number.
3. Graham Numbers underestimates companies that are light with book.
Standard Industries Graham Number Related Terms
Standard Industries Graham Number Historical Data
* Premium members only.
The historical data trend for Standard Industries's Graham Number can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Standard Industries Graham Number Competitor Comparison
For the Textile Manufacturing subindustry, Standard Industries's Price-to-Graham-Number, along with its competitors' market caps and Price-to-Graham-Number data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Standard Industries Price-to-Graham-Number vs Manufacturing - Apparel & Accessories Industry
For the Manufacturing - Apparel & Accessories industry and Consumer Cyclical sector, Standard Industries's Price-to-Graham-Number distribution charts can be found below:
* The bar in red indicates where Standard Industries's Price-to-Graham-Number falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Standard Industries (NSE:SIL) has a Graham Number of ₹N/A as of Mar. 2026. The Graham Number values a company based on its per-share earnings and book value. View historical data on Standard Industries and its competitors. Over the past decade, Standard Industries' Graham Number has ranged from 0.10 to 1.81. According to the industry distribution chart, Standard Industries ranks #999999 out of 718 companies in the Manufacturing - Apparel & Accessories industry.
Is Standard Industries' Graham Number too high?
Standard Industries' current Graham Number is ₹N/A. Over the past 10 years, this metric has ranged from a low of 0.10 to a high of 1.81. Based on the distribution chart, Standard Industries ranks #999999 out of 718 companies in the Manufacturing - Apparel & Accessories industry, which is in the bottom quartile relative to peers. Overall, Standard Industries has a GF Score™ of 63/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Standard Industries' Graham Number compare to competitors?
According to the Manufacturing - Apparel & Accessories industry distribution chart, Standard Industries ranks #999999 out of 718 companies for Graham Number. This places Standard Industries in the lower half of its industry. The industry median Graham Number is 1.06. Historically, Standard Industries' own Graham Number has ranged from 0.10 to 1.81 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Graham Number for a Manufacturing - Apparel & Accessories company?
The median Graham Number among Manufacturing - Apparel & Accessories companies is 1.06, based on 718 companies in the industry. Companies in the top quartile (top 25%) have a Graham Number significantly above this median, while those in the bottom quartile fall well below. However, Graham Number should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Graham Number mean?
A high Graham Number can signal that a stock is expensive relative to its fundamentals. The Graham Number values a company based on its per-share earnings and book value. View historical data on Standard Industries and its competitors. For the Manufacturing - Apparel & Accessories industry, the median Graham Number is 1.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Standard Industries's current Graham Number is ₹N/A. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Standard Industries stock overvalued right now?
Based on GuruFocus' analysis, Standard Industries (NSE:SIL) is currently considered Possible Value Trap. The stock's GF Value™ is ₹33.44, compared to a current price of ₹17.09 — trading 48.9% below its estimated fair value. The current Graham Number is ₹N/A. Standard Industries' overall GF Score™ is 63/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Graham Number calculated?
Graham Number is calculated from a company's financial statements. For Standard Industries (NSE:SIL), the current Graham Number is ₹N/A as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Standard Industries (NSE:SIL) Overvalued in 2026?
Based on GuruFocus' analysis, Standard Industries stock appears to be undervalued.
The current stock price of ₹17.09 is trading 48.9% below its estimated GF Value™ of ₹33.44.
GuruFocus considers Standard Industries to be Possible Value Trap.
Key valuation signals for NSE:SIL:
Graham Number: ₹N/A
GF Value™: ₹33.44 vs. price of ₹17.09 (48.9% below fair value)
No single metric tells the full story. See the NSE:SIL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Standard Industries Ltd is an investment holding company. The company's operating segment includes Property and Trading. It generates maximum revenue from the Trading division segment. The company offers products such as Cotton towels, Bed sheets, Interlining Fabric, Cotton and blended dhoti, Cotton/PC blended and poly-viscose suiting, PC Poplins and shirtings, Rubia, Rubia in cotton as well as PC Blended and Punjabi suits.
63GF Score
Get the complete analysis for NSE:SIL
Graham Number is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SIL has been successfully added to your 
