Pha Le Plastics Manufacturing and Technology JSC (STC:PLP) Graham Number: ₫N/A (As of . 20)


What is Pha Le Plastics Manufacturing and Technology JSC Graham Number?

Pha Le Plastics Manufacturing and Technology JSC STC:PLP Graham Number is ₫N/A as of . 20. The stock has 1 warning sign investors should review. Among 1,148 Chemicals companies, Pha Le Plastics Manufacturing and Technology JSC ranks worse than 87107.93% on this metric.

Graham Number is a figure that measures a stock's fundamental value by taking into account the company's earnings per share and book value per share. The Graham number is the upper bound of the price range that a defensive investor should pay for the stock. According to the theory, any stock price below the Graham number is considered undervalued, and thus worth investing in.

As of today (2026-07-06), the stock price of Pha Le Plastics Manufacturing and Technology JSC is ₫4270.00. Pha Le Plastics Manufacturing and Technology JSC's graham number for the quarter that ended in . 20 was ₫N/A. Therefore, Pha Le Plastics Manufacturing and Technology JSC's Price to Graham Number ratio for today is N/A.

The historical rank and industry rank for Pha Le Plastics Manufacturing and Technology JSC's Graham Number or its related term are showing as below:

STC:PLP's Price-to-Graham-Number is not ranked *
in the Chemicals industry.
Industry Median: 1.57
* Ranked among companies with meaningful Price-to-Graham-Number only.

Graham Number is a combination of asset valuation and earnings power valuation. It is a very conservative way of valuing a stock.

Pha Le Plastics Manufacturing and Technology JSC  (STC:PLP) Graham Number Explanation

Ben Graham actually did not publish a formula like this. But he wrote in The Intelligent Investor (1948 version) regarding to the criteria for purchases:

Current price should not be more than 15 times average earnings of the past three years.

Current price should not be more than 1.5 times the book value last reported. However, a multiplier of earnings below 15 could justify a correspondingly higher multiplier of assets. As a rule of thumb we suggest that the product of the multiplier times the ratio of price to book value should not exceed 22.5. (This figure corresponds to 15 times earnings and 1.5 times book value. It would admit an issue selling at only 9 times earnings and 2.5 times asset value, etc.)

Unlike valuation methods such as DCF or Discounted Earnings, the Graham number does not take growth into the valuation. Unlike the valuation methods based on book value alone, it takes into account the earnings power. Therefore, the Graham Number is a combination of asset valuation and earnings power valuation.

In general, the Graham number is a very conservative way of valuing a stock. It cannot be applied to companies with negative book values.

Pha Le Plastics Manufacturing and Technology JSC's Price to Graham number Ratio for today is calculated as

Price to Graham number=Share Price (Today)/Graham number (Q: . 20 )
=4270.00/N/A
=N/A

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Be Aware

Please keep these in mind:

1. Graham Number does not take growth into account. Therefore it underestimates the values of the companies that have good earnings growth. We feel that if the earnings per share grows more than 10% a year, Graham Number underestimates the value.
2. Graham Number punishes the companies that have temporarily low earnings. Therefore, an average of earnings makes more sense in the calculation of Graham Number.
3. Graham Numbers underestimates companies that are light with book.

Pha Le Plastics Manufacturing and Technology JSC Graham Number Related Terms

Pha Le Plastics Manufacturing and Technology JSC Graham Number Historical Data

* Premium members only.

The historical data trend for Pha Le Plastics Manufacturing and Technology JSC's Graham Number can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Pha Le Plastics Manufacturing and Technology JSC Graham Number Chart

Pha Le Plastics Manufacturing and Technology JSC Annual Data
Trend
Graham Number

Pha Le Plastics Manufacturing and Technology JSC Semi-Annual Data
Graham Number

Pha Le Plastics Manufacturing and Technology JSC Graham Number Competitor Comparison

For the Specialty Chemicals subindustry, Pha Le Plastics Manufacturing and Technology JSC's Price-to-Graham-Number, along with its competitors' market caps and Price-to-Graham-Number data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Pha Le Plastics Manufacturing and Technology JSC Price-to-Graham-Number vs Chemicals Industry

For the Chemicals industry and Basic Materials sector, Pha Le Plastics Manufacturing and Technology JSC's Price-to-Graham-Number distribution charts can be found below:

* The bar in red indicates where Pha Le Plastics Manufacturing and Technology JSC's Price-to-Graham-Number falls into.


Pha Le Plastics Manufacturing and Technology JSC Graham Number Calculation

Graham Number is a concept based on Ben Graham's conservative valuation of companies.

Pha Le Plastics Manufacturing and Technology JSC's Graham Number for the fiscal year that ended in . 20 is calculated as

Graham Number
=sqrt of (22.5* Tangible Book per Share *EPS without NRI)
=sqrt of (22.5**)
=N/A

Pha Le Plastics Manufacturing and Technology JSC's Graham Number for the quarter that ended in . 20 is calculated as

Graham Number
=sqrt of (22.5*Tangible Book per Share*EPS without NRI (TTM))
=sqrt of (22.5**)
=N/A

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Frequently Asked Questions Learn more about Graham Number →
What does a Graham Number of ₫N/A mean?
Pha Le Plastics Manufacturing and Technology JSC (STC:PLP) has a Graham Number of ₫N/A as of . 20. The Graham Number values a company based on its per-share earnings and book value. View historical data on Pha Le Plastics Manufacturing and Technology JSC and its competitors. According to the industry distribution chart, Pha Le Plastics Manufacturing and Technology JSC ranks #999999 out of 1148 companies in the Chemicals industry.
Is Pha Le Plastics Manufacturing and Technology JSC's Graham Number too high?
Pha Le Plastics Manufacturing and Technology JSC's current Graham Number is ₫N/A. Based on the distribution chart, Pha Le Plastics Manufacturing and Technology JSC ranks #999999 out of 1148 companies in the Chemicals industry, which is in the bottom quartile relative to peers.
How does Pha Le Plastics Manufacturing and Technology JSC's Graham Number compare to competitors?
According to the Chemicals industry distribution chart, Pha Le Plastics Manufacturing and Technology JSC ranks #999999 out of 1148 companies for Graham Number. This places Pha Le Plastics Manufacturing and Technology JSC in the lower half of its industry. The industry median Graham Number is 1.57. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Graham Number for a Chemicals company?
The median Graham Number among Chemicals companies is 1.57, based on 1,148 companies in the industry. Companies in the top quartile (top 25%) have a Graham Number significantly above this median, while those in the bottom quartile fall well below. However, Graham Number should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Graham Number mean?
A high Graham Number can signal that a stock is expensive relative to its fundamentals. The Graham Number values a company based on its per-share earnings and book value. View historical data on Pha Le Plastics Manufacturing and Technology JSC and its competitors. For the Chemicals industry, the median Graham Number is 1.57 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Pha Le Plastics Manufacturing and Technology JSC's current Graham Number is ₫N/A. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Pha Le Plastics Manufacturing and Technology JSC stock overvalued right now?
Pha Le Plastics Manufacturing and Technology JSC (STC:PLP) has a current Graham Number of ₫N/A. The current Graham Number is ₫N/A. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Graham Number calculated?
Graham Number is calculated from a company's financial statements. For Pha Le Plastics Manufacturing and Technology JSC (STC:PLP), the current Graham Number is ₫N/A as of . 20. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Pha Le Plastics Manufacturing and Technology JSC Business Description

Address Lands for Industrial Zone CN4.3, MP Dinh Vu Economic Zone in Dinh Vu - Cat Hai, Dong Hai Ward 2, Hai An District, Haiphong, VNM
Pha Le Plastics Manufacturing and Technology JSC is engaged in the manufacturing of plastic filler additives, stone powder, and limestone. Its products include SPC Neo Floor technology stone floor, molding with SPC Technology, filler material, CACO3 stone, CACO3 stone powder, Limestone, and White Masterbatch. The company generates majority of its revenue domestically.