Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Unison MetalsBOM:538610 +3.08%65 Gross Margin % is 19.18% as of Mar. 2026, which is 16% below its 10-year median of 22.72. GuruFocus rates BOM:538610 with a GF Score™ of 65/100 and a GF Value™ of ₹2.62 (Possible Value Trap). The stock has 6 warning signs investors should review. Among 596 Steel companies, Unison Metals ranks better than 58.72% on this metric.
Warren Buffett believes that firms with excellent long term economics tend to have consistently higher margins.
Durable competitive advantage creates a high Gross Margin % because of the freedom to price in excess of cost. Companies can be categorized by their Gross Margin %
1. Greater than 40% = Durable competitive advantage
2. Less than 40% = Competition eroding margins
3. Less than 20% = no sustainable competitive advantage
Consistency of Gross Margin is key
Unison Metals had a gross margin of 19.18% for the quarter that ended in Mar. 2026 => No sustainable competitive advantage
Be Aware
If a company loses its competitive advantages, usually its gross margin declines well before its sales declines. Watching Gross Margin % and Operating Margin % closely helps avoid value trap situations.
Unison Metals Gross Margin % Related Terms
Unison Metals Gross Margin % Historical Data
* Premium members only.
The historical data trend for Unison Metals's Gross Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:538610 vs NUE, STLD, RS: Gross Margin % Comparison
For the Steel subindustry, Unison Metals's Gross Margin %, along with its competitors' market caps and Gross Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Unison Metals Gross Margin % vs Steel Industry
For the Steel industry and Basic Materials sector, Unison Metals's Gross Margin % distribution charts can be found below:
* The bar in red indicates where Unison Metals's Gross Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
A positive Gross Profit is only the first step for a company to make a net profit. The gross profit needs to be big enough to also cover related labor, equipment, rental, marketing/advertising, research and development and a lot of other costs in selling the products.
Unison Metals (BOM:538610) has a Gross Margin % of 19.18% as of Mar. 2026. Gross margin is the ratio of total gross profit to net sales. View historical data on Unison Metals and its competitors. This is 16% below median its historical median of 22.72. Over the past decade, Unison Metals' Gross Margin % has ranged from 15.57 to 30.24. According to the industry distribution chart, Unison Metals ranks #246 out of 596 companies in the Steel industry, placing it in the top 41.3%.
Is Unison Metals' Gross Margin % too high?
Unison Metals' current Gross Margin % of 19.18% is 16% below median its 10-year median of 22.72. Over the past 10 years, this metric has ranged from a low of 15.57 to a high of 30.24. The Steel industry median Gross Margin % is 12.62. Unison Metals' value of 19.18% is 52% above this industry median. Based on the distribution chart, Unison Metals ranks #246 out of 596 companies in the Steel industry, which is above the industry midpoint. Overall, Unison Metals has a GF Score™ of 65/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Unison Metals' Gross Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Unison Metals ranks #246 out of 596 companies for Gross Margin %. This puts Unison Metals in the upper half of its industry. The industry median Gross Margin % is 12.62. Unison Metals' value of 19.18% is 52% above this benchmark. Historically, Unison Metals' own Gross Margin % has ranged from 15.57 to 30.24 over the past decade. While the company's 10-year median is 22.72 vs. the industry median of 12.62, Unison Metals has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Gross Margin % for a Steel company?
The median Gross Margin % among Steel companies is 12.62, based on 596 companies in the industry. Companies in the top quartile (top 25%) have a Gross Margin % significantly above this median, while those in the bottom quartile fall well below. However, Gross Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Unison Metals's current Gross Margin % of 19.18% is 52% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Gross Margin % mean?
A high Gross Margin % can signal that a stock is expensive relative to its fundamentals. Gross margin is the ratio of total gross profit to net sales. View historical data on Unison Metals and its competitors. For the Steel industry, the median Gross Margin % is 12.62 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Unison Metals's current Gross Margin % is 19.18%, which is 16% below median its own 10-year median of 22.72. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Unison Metals stock overvalued right now?
Based on GuruFocus' analysis, Unison Metals (BOM:538610) is currently considered Possible Value Trap. The stock's GF Value™ is ₹2.62, compared to a current price of ₹0.67 — trading 74.4% below its estimated fair value. The current Gross Margin % is 19.18%, which is 16% below median its 10-year median of 22.72 and 52% above the Steel industry median of 12.62. Unison Metals' overall GF Score™ is 65/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Gross Margin % calculated?
Gross Margin % is calculated from a company's financial statements. For Unison Metals (BOM:538610), the current Gross Margin % is 19.18% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Unison Metals (BOM:538610) Overvalued in 2026?
Based on GuruFocus' analysis, Unison Metals stock appears to be undervalued.
The current stock price of ₹0.67 is trading 74.4% below its estimated GF Value™ of ₹2.62.
GuruFocus considers Unison Metals to be Possible Value Trap.
Key valuation signals for BOM:538610:
Gross Margin %: 19.18% (16% below median its 10-year median of 22.72)
GF Value™: ₹2.62 vs. price of ₹0.67 (74.4% below fair value)
Industry Position: 52% above the Steel median (#246 of 596)
No single metric tells the full story. See the BOM:538610 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Unison Metals Ltd is engaged in the manufacturing of all kinds and forms of steel and Ceramic glaze mixture. The company manufactures hot and cold-rolled stainless steel sheets and stainless steel patta for a range of industrial applications. Its products include Serveware; Storage ware; S.S. Cookware, Ingots, Dinner Sets, Ceramic Glaze, Unilock Airlight, and others. The majority of the revenue is generated from the sale of C.R.Patta. The Company's main business activity is trading and Manufacturing Steel Patta and Ceramics Products.
65GF Score
Get the complete analysis for BOM:538610
Gross Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:538610 has been successfully added to your 
