3D SystemsMIL:1DDD 32 Median PS Value is €4.25 as of Jun. 30, 2026, which is 100% below its 10-year median of 0.67. GuruFocus rates MIL:1DDD with a GF Score™ of 32/100 and a GF Value™ of €2.24 (Modestly Overvalued). The stock has 4 warning signs investors should review. Among 1,557 Hardware companies, 3D Systems ranks better than 86.9% on this metric.
This valuation method assumes that the stock valuation will revert to its historical (10-Year) median in terms of PS Ratio. The reason we use PS Ratio instead of PE Ratio or PB Ratio is because PS Ratio is independent of profit margin, and can be applied to a broader range of situations.
Median PS Value is calculated as trailing twelve months (TTM) Revenue per Share times 10-Year median PS Ratio. 3D Systems's Revenue per Share for the trailing twelve months (TTM) ended in Mar. 2026 was €2.192. 3D Systems's 10-Year median PS Ratio is 1.9389. Therefore, the Median PS Value for today is €4.25.
As of today (2026-06-30), 3D Systems's share price is €2.532. 3D Systems's Median PS Value is €4.25. Therefore, 3D Systems's Price to Median PS Value for today is 0.60.
The historical rank and industry rank for 3D Systems's Median PS Value or its related term are showing as below:
MIL:1DDD'
s Price-to-Median-PS-Value Range Over the Past 10 Years
Min: 0.27 Med: 0.67 Max: 2.66
Current: 0.6
During the past 13 years, the highest Price to Median PS Value of 3D Systems was 2.66. The lowest was 0.27. And the median was 0.67.
MIL:1DDD's Price-to-Median-PS-Value is ranked better than 86.9% of 1557
companies
in the Hardware industry
Industry Median: 1.31
vs MIL:1DDD: 0.60
3D Systems (MIL:1DDD) Median PS Value Explanation
This valuation method assumes that the stock valuation will revert to its historical (10-Year) mean in terms of PS Ratio. The reason we use PS Ratio instead of PE Ratio or PB Ratio
is because PS Ratio is independent of profit margin, and can be applied to a broader range of situations.
It also assumes that over time the profit margin is constant. If a company increases its profit margin to a sustainable level, this value might under-estimate its value. If it has permanent declined profit margins, this may over-estimate the company's value.
3D Systems's Price to Median PS Value for today is calculated as
Price to Median PS Value
=
Share Price
/
Median PS Value
=
2.532
/
4.25
=
0.60
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
3D Systems Median PS Value Related Terms
3D Systems Median PS Value Historical Data
* Premium members only.
The historical data trend for 3D Systems's Median PS Value can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
MIL:1DDD vs VELO, QMCO, OSS: Median PS Value Comparison
For the Computer Hardware subindustry, 3D Systems's Price-to-Median-PS-Value, along with its competitors' market caps and Price-to-Median-PS-Value data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
3D Systems Price-to-Median-PS-Value vs Hardware Industry
For the Hardware industry and Technology sector, 3D Systems's Price-to-Median-PS-Value distribution charts can be found below:
* The bar in red indicates where 3D Systems's Price-to-Median-PS-Value falls into.
10-Year Median PS Ratio is 1.9389.
3D Systems's Revenue per Share for the trailing twelve months (TTM) ended in Mar. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was €2.192.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
3D Systems (MIL:1DDD) has a Median PS Value of €4.25 as of Jun. 30, 2026. Median price-sales value is the stock value based on a company's 10-year median price-sales ratio, View historical data on 3D Systems and its competitors. This is 534% above median its historical median of 0.67. Over the past decade, 3D Systems' Median PS Value has ranged from 0.27 to 2.66. According to the industry distribution chart, 3D Systems ranks #204 out of 1557 companies in the Hardware industry, placing it in the top 13.1%.
Is 3D Systems' Median PS Value too high?
3D Systems' current Median PS Value of €4.25 is 534% above median its 10-year median of 0.67. Over the past 10 years, this metric has ranged from a low of 0.27 to a high of 2.66. Based on the distribution chart, 3D Systems ranks #204 out of 1557 companies in the Hardware industry, which is in the top quartile — a strong position relative to peers. Overall, 3D Systems has a GF Score™ of 32/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does 3D Systems' Median PS Value compare to VELO and QMCO?
According to the Hardware industry distribution chart, 3D Systems ranks #204 out of 1557 companies for Median PS Value. This places 3D Systems in the top 13% of its industry — outperforming the majority of peers. The industry median Median PS Value is 1.31. Historically, 3D Systems' own Median PS Value has ranged from 0.27 to 2.66 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Median PS Value for a Hardware company?
The median Median PS Value among Hardware companies is 1.31, based on 1,557 companies in the industry. Companies in the top quartile (top 25%) have a Median PS Value significantly above this median, while those in the bottom quartile fall well below. However, Median PS Value should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Median PS Value mean?
A high Median PS Value can signal that a stock is expensive relative to its fundamentals. Median price-sales value is the stock value based on a company's 10-year median price-sales ratio, View historical data on 3D Systems and its competitors. For the Hardware industry, the median Median PS Value is 1.31 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. 3D Systems's current Median PS Value is €4.25, which is 534% above median its own 10-year median of 0.67. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is 3D Systems stock overvalued right now?
Based on GuruFocus' analysis, 3D Systems (MIL:1DDD) is currently considered Modestly Overvalued. The stock's GF Value™ is €2.24, compared to a current price of €2.53 — trading 13% above its estimated fair value. The current Median PS Value is €4.25, which is 534% above median its 10-year median of 0.67. 3D Systems' overall GF Score™ is 32/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Median PS Value calculated?
Median PS Value is calculated from a company's financial statements. For 3D Systems (MIL:1DDD), the current Median PS Value is €4.25 as of Jun. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is 3D Systems (MIL:1DDD) Overvalued in 2026?
Based on GuruFocus' analysis, 3D Systems stock appears to be overvalued.
The current stock price of €2.53 is trading 13% above its estimated GF Value™ of €2.24.
GuruFocus considers 3D Systems to be Modestly Overvalued.
Key valuation signals for MIL:1DDD:
Median PS Value: €4.25 (534% above median its 10-year median of 0.67)
GF Value™: €2.24 vs. price of €2.53 (13% above fair value)
No single metric tells the full story. See the MIL:1DDD stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
3D Systems Corp provide comprehensive 3D printing and digital manufacturing solutions, including 3D printers for plastics and metals, materials, software, and services, including maintenance, manufacturing and applications engineering. Its solutions support applications in two key industry verticals: Healthcare Solutions provide surgical planning, implants, instrumentation, and medical education solutions to help medical device manufacturers and healthcare providers accelerate, and ultimately, transform healthcare, and Industrial Solutions which includes aerospace, defense, transportation and general manufacturing. The company operates in the Americas, EMEA, and APAC regions.
32GF Score
Get the complete analysis for MIL:1DDD
Median PS Value is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MIL:1DDD has been successfully added to your 
