Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Shapir Engineering and IndustryXTAE:SPEN -0.62%88 Median PS Value is ₪31.20 as of Jul. 21, 2026, which is 100% below its 10-year median of 1.03. GuruFocus rates XTAE:SPEN with a GF Score™ of 88/100 and a GF Value™ of ₪31.31 (Significantly Overvalued). The stock has 12 warning signs investors should review. Among 1,018 Construction companies, Shapir Engineering and Industry ranks worse than 70.83% on this metric.
This valuation method assumes that the stock valuation will revert to its historical (10-Year) median in terms of PS Ratio. The reason we use PS Ratio instead of PE Ratio or PB Ratio is because PS Ratio is independent of profit margin, and can be applied to a broader range of situations.
The historical rank and industry rank for Shapir Engineering and Industry's Median PS Value or its related term are showing as below:
XTAE:SPEN'
s Price-to-Median-PS-Value Range Over the Past 10 Years
Min: 0.85 Med: 1.03 Max: 1.54
Current: 1.53
During the past 13 years, the highest Price to Median PS Value of Shapir Engineering and Industry was 1.54. The lowest was 0.85. And the median was 1.03.
XTAE:SPEN's Price-to-Median-PS-Value is ranked worse than 70.83% of 1018
companies
in the Construction industry
Industry Median: 1.07
vs XTAE:SPEN: 1.53
Shapir Engineering and Industry (XTAE:SPEN) Median PS Value Explanation
This valuation method assumes that the stock valuation will revert to its historical (10-Year) mean in terms of PS Ratio. The reason we use PS Ratio instead of PE Ratio or PB Ratio
is because PS Ratio is independent of profit margin, and can be applied to a broader range of situations.
It also assumes that over time the profit margin is constant. If a company increases its profit margin to a sustainable level, this value might under-estimate its value. If it has permanent declined profit margins, this may over-estimate the company's value.
Shapir Engineering and Industry's Price to Median PS Value for today is calculated as
Price to Median PS Value
=
Share Price
/
Median PS Value
=
47.77
/
31.20
=
1.53
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shapir Engineering and Industry Median PS Value Related Terms
Shapir Engineering and Industry Median PS Value Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shapir Engineering and Industry Median PS Value Chart
XTAE:SPEN vs PWR, FIX, EME: Median PS Value Comparison
For the Engineering & Construction subindustry, Shapir Engineering and Industry's Price-to-Median-PS-Value, along with its competitors' market caps and Price-to-Median-PS-Value data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shapir Engineering and Industry Price-to-Median-PS-Value vs Construction Industry
For the Construction industry and Industrials sector, Shapir Engineering and Industry's Price-to-Median-PS-Value distribution charts can be found below:
* The bar in red indicates where Shapir Engineering and Industry's Price-to-Median-PS-Value falls into.
10-Year Median PS Ratio is 1.8404.
Shapir Engineering and Industry's Revenue per Share for the trailing twelve months (TTM) ended in Mar. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was ₪16.953.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shapir Engineering and Industry (XTAE:SPEN) has a Median PS Value of ₪31.20 as of Jul. 21, 2026. Median price-sales value is the stock value based on a company's 10-year median price-sales ratio, View historical data on Shapir Engineering and Industry and its competitors. This is 2929% above median its historical median of 1.03. Over the past decade, Shapir Engineering and Industry's Median PS Value has ranged from 0.85 to 1.54. According to the industry distribution chart, Shapir Engineering and Industry ranks #721 out of 1018 companies in the Construction industry, placing it in the top 70.8%.
Is Shapir Engineering and Industry's Median PS Value too high?
Shapir Engineering and Industry's current Median PS Value of ₪31.20 is 2929% above median its 10-year median of 1.03. Over the past 10 years, this metric has ranged from a low of 0.85 to a high of 1.54. Based on the distribution chart, Shapir Engineering and Industry ranks #721 out of 1018 companies in the Construction industry, which is below the industry midpoint. Overall, Shapir Engineering and Industry has a GF Score™ of 88/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Shapir Engineering and Industry's Median PS Value compare to PWR and FIX?
According to the Construction industry distribution chart, Shapir Engineering and Industry ranks #721 out of 1018 companies for Median PS Value. This places Shapir Engineering and Industry in the lower half of its industry. The industry median Median PS Value is 1.07. Historically, Shapir Engineering and Industry's own Median PS Value has ranged from 0.85 to 1.54 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Median PS Value for a Construction company?
The median Median PS Value among Construction companies is 1.07, based on 1,018 companies in the industry. Companies in the top quartile (top 25%) have a Median PS Value significantly above this median, while those in the bottom quartile fall well below. However, Median PS Value should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Median PS Value mean?
A high Median PS Value can signal that a stock is expensive relative to its fundamentals. Median price-sales value is the stock value based on a company's 10-year median price-sales ratio, View historical data on Shapir Engineering and Industry and its competitors. For the Construction industry, the median Median PS Value is 1.07 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shapir Engineering and Industry's current Median PS Value is ₪31.20, which is 2929% above median its own 10-year median of 1.03. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shapir Engineering and Industry stock overvalued right now?
Based on GuruFocus' analysis, Shapir Engineering and Industry (XTAE:SPEN) is currently considered Significantly Overvalued. The stock's GF Value™ is ₪31.31, compared to a current price of ₪47.77 — trading 52.6% above its estimated fair value. The current Median PS Value is ₪31.20, which is 2929% above median its 10-year median of 1.03. Shapir Engineering and Industry's overall GF Score™ is 88/100 with 12 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Median PS Value calculated?
Median PS Value is calculated from a company's financial statements. For Shapir Engineering and Industry (XTAE:SPEN), the current Median PS Value is ₪31.20 as of Jul. 21, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shapir Engineering and Industry (XTAE:SPEN) Overvalued in 2026?
Based on GuruFocus' analysis, Shapir Engineering and Industry stock appears to be overvalued.
The current stock price of ₪47.77 is trading 52.6% above its estimated GF Value™ of ₪31.31.
GuruFocus considers Shapir Engineering and Industry to be Significantly Overvalued.
Key valuation signals for XTAE:SPEN:
Median PS Value: ₪31.20 (2929% above median its 10-year median of 1.03)
GF Value™: ₪31.31 vs. price of ₪47.77 (52.6% above fair value)
No single metric tells the full story. See the XTAE:SPEN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shapir Engineering and Industry Business Description
Shapir Engineering and Industry Ltd is an Israel-based company which is active in engineering and construction industry. It is engaged in manufacturing and supplying of aggregates and road materials, concrete, concrete fabricated plant as well as asphalt for road paving. The company also manufactures ready mix concrete and building finishing products and prefabricated elements from prestressed and precast concrete. Shapir focuses on developing high-quality apartment buildings and other apartments in various projects through Israel.
88GF Score
Get the complete analysis for XTAE:SPEN
Median PS Value is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XTAE:SPEN has been successfully added to your 
