333D (ASX:T3D) Beneish M-Score: 0.00 (As of Jul. 02, 2026)


What is 333D Beneish M-Score?

333D ASX:T3D +2.44% Beneish M-Score is 0.00 as of Jul. 02, 2026. The stock has 1 warning sign investors should review. Among 2,405 Hardware companies, 333D ranks worse than 41580% on this metric.

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

The historical rank and industry rank for 333D's Beneish M-Score or its related term are showing as below:

During the past 13 years, the highest Beneish M-Score of 333D was -31.28. The lowest was -146.75. And the median was -64.99.

333D Beneish M-Score Historical Data

* Premium members only.

The historical data trend for 333D's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

333D Beneish M-Score Chart

333D Annual Data
Trend Jun16 Jun17 Jun18 Jun19 Jun20 Jun21 Jun22 Jun23 Jun24 Jun25
Beneish M-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only -31.28 0.00 0.00 0.00 0.00

333D Semi-Annual Data
Jun16 Dec16 Jun17 Dec17 Jun18 Dec18 Jun19 Dec19 Jun20 Dec20 Jun21 Dec21 Jun22 Dec22 Jun23 Dec23 Jun24 Dec24 Jun25 Dec25
Beneish M-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

ASX:T3D vs SNDK, DELL, STX: Beneish M-Score Comparison

For the Computer Hardware subindustry, 333D's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

333D Beneish M-Score vs Hardware Industry

For the Hardware industry and Technology sector, 333D's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where 333D's Beneish M-Score falls into.


333D Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of 333D for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * +0.528 * +0.404 * +0.892 * +0.115 *
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * +4.679 * -0.327 *
=

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Jun25) TTM:Last Year (Jun24) TTM:
Total Receivables was A$0.15 Mil.
Revenue was A$1.01 Mil.
Gross Profit was A$0.40 Mil.
Total Current Assets was A$0.64 Mil.
Total Assets was A$0.64 Mil.
Property, Plant and Equipment(Net PPE) was A$0.00 Mil.
Depreciation, Depletion and Amortization(DDA) was A$0.00 Mil.
Selling, General, & Admin. Expense(SGA) was A$0.52 Mil.
Total Current Liabilities was A$0.67 Mil.
Long-Term Debt & Capital Lease Obligation was A$0.00 Mil.
Net Income was A$0.14 Mil.
Gross Profit was A$0.50 Mil.
Cash Flow from Operations was A$0.07 Mil.
 Total Receivables was A$0.01 Mil.
Revenue was A$0.19 Mil.
Gross Profit was A$0.18 Mil.
Total Current Assets was A$0.03 Mil.
Total Assets was A$0.03 Mil.
Property, Plant and Equipment(Net PPE) was A$0.00 Mil.
Depreciation, Depletion and Amortization(DDA) was A$0.00 Mil.
Selling, General, & Admin. Expense(SGA) was A$0.60 Mil.
Total Current Liabilities was A$0.55 Mil.
Long-Term Debt & Capital Lease Obligation was A$0.00 Mil.

1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(0.152 / 1.009) / (0.01 / 0.19)
=0.150644 / 0.052632
=

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(0.181 / 0.19) / (0.403 / 1.009)
=0.952632 / 0.399405
=

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (0.641 + 0) / 0.641) / (1 - (0.025 + 0) / 0.025)
=0 / 0
=

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=1.009 / 0.19
=

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(0 / (0 + 0)) / (0 / (0 + 0))
= /
=

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(0.519 / 1.009) / (0.601 / 0.19)
=0.514371 / 3.163158
=

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((0 + 0.673) / 0.641) / ((0 + 0.546) / 0.025)
=1.049922 / 21.84
=

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(0.144 - 0.497 - 0.071) / 0.641
=-0.661466

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Frequently Asked Questions Learn more about Beneish M-Score →
What does a Beneish M-Score of 0.00 mean?
333D (ASX:T3D) has a Beneish M-Score of 0.00 as of Jul. 02, 2026. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on 333D and its competitors. According to the industry distribution chart, 333D ranks #999999 out of 2405 companies in the Hardware industry.
Is 333D's Beneish M-Score too high?
333D's current Beneish M-Score is 0.00. Based on the distribution chart, 333D ranks #999999 out of 2405 companies in the Hardware industry, which is in the bottom quartile relative to peers.
How does 333D's Beneish M-Score compare to SNDK and DELL?
According to the Hardware industry distribution chart, 333D ranks #999999 out of 2405 companies for Beneish M-Score. This places 333D in the lower half of its industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Beneish M-Score for a Hardware company?
A good Beneish M-Score depends on the Hardware industry context. However, Beneish M-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Beneish M-Score mean?
A high Beneish M-Score can signal that a stock is expensive relative to its fundamentals. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on 333D and its competitors. 333D's current Beneish M-Score is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is 333D stock overvalued right now?
333D (ASX:T3D) has a current Beneish M-Score of 0.00. The current Beneish M-Score is 0.00. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Beneish M-Score calculated?
Beneish M-Score is calculated from a company's financial statements. For 333D (ASX:T3D), the current Beneish M-Score is 0.00 as of Jul. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

333D Business Description

Address 60 Martin Place, Level 1, Sydney, NSW, AUS, 2000
333D Ltd is a multi-platform 3D printing company based in Australia that provides 3D printing equipment, consumables, and generates revenue from the sale of 3D printing equipment, consumables, and rendering services. The company works with clients to create and refine products, offering turnkey solutions including design, engineering, material selection, and 3D printing. A key service is its Radiology Suite, which leverages NFT technology applied to radiology DICOM data for seamless, automated processing, embedding clinical, billing, and general data. Additionally, 333D has adopted a Bitcoin Treasury Management Policy based on recognized standards to securely invest excess cash. Its focus is on digital asset management, healthcare software development, and 3D printing services.