ATMMF (Atomic Minerals) Beneish M-Score: 0.00 (As of Jun. 24, 2026)


What is Atomic Minerals Beneish M-Score?

Atomic Minerals ATMMF +11.50% Beneish M-Score is 0.00 as of Jun. 24, 2026. The stock has 2 warning signs investors should review. Among 685 Metals & Mining companies, Atomic Minerals ranks worse than 145985.26% on this metric.

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

The historical rank and industry rank for Atomic Minerals's Beneish M-Score or its related term are showing as below:

During the past 13 years, the highest Beneish M-Score of Atomic Minerals was 0.00. The lowest was 0.00. And the median was 0.00.

Atomic Minerals Beneish M-Score Historical Data

* Premium members only.

The historical data trend for Atomic Minerals's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Atomic Minerals Beneish M-Score Chart

Atomic Minerals Annual Data
Trend Aug16 Aug17 Aug18 Aug19 Aug20 Aug21 Aug22 Aug23 Aug24 Aug25
Beneish M-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

Atomic Minerals Quarterly Data
May21 Aug21 Nov21 Feb22 May22 Aug22 Nov22 Feb23 May23 Aug23 Nov23 Feb24 May24 Aug24 Nov24 Feb25 May25 Aug25 Nov25 Feb26
Beneish M-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

Atomic Minerals Beneish M-Score Competitor Comparison

For the Other Industrial Metals & Mining subindustry, Atomic Minerals's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Atomic Minerals Beneish M-Score vs Metals & Mining Industry

For the Metals & Mining industry and Basic Materials sector, Atomic Minerals's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where Atomic Minerals's Beneish M-Score falls into.


Atomic Minerals Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of Atomic Minerals for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * +0.528 * +0.404 * +0.892 * +0.115 *
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * +4.679 * -0.327 *
=

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Feb26) TTM:Last Year (Feb25) TTM:
Total Receivables was $0.05 Mil.
Revenue was 0 + 0 + 0 + 0 = $0.00 Mil.
Gross Profit was -0.001 + -0.001 + -0.001 + -0.001 = $-0.00 Mil.
Total Current Assets was $0.38 Mil.
Total Assets was $1.69 Mil.
Property, Plant and Equipment(Net PPE) was $1.31 Mil.
Depreciation, Depletion and Amortization(DDA) was $0.00 Mil.
Selling, General, & Admin. Expense(SGA) was $1.41 Mil.
Total Current Liabilities was $0.30 Mil.
Long-Term Debt & Capital Lease Obligation was $0.00 Mil.
Net Income was -1.18 + -0.201 + 0.11 + -0.128 = $-1.40 Mil.
Non Operating Income was 0 + 0 + 0.104 + 0 = $0.10 Mil.
Cash Flow from Operations was -1.356 + -0.097 + -0.031 + 0.006 = $-1.48 Mil.
 Total Receivables was $0.02 Mil.
Revenue was 0 + 0 + 0 + 0 = $0.00 Mil.
Gross Profit was -0.001 + -0.001 + -0.001 + -0.001 = $-0.00 Mil.
Total Current Assets was $0.14 Mil.
Total Assets was $0.65 Mil.
Property, Plant and Equipment(Net PPE) was $0.51 Mil.
Depreciation, Depletion and Amortization(DDA) was $0.00 Mil.
Selling, General, & Admin. Expense(SGA) was $0.87 Mil.
Total Current Liabilities was $0.77 Mil.
Long-Term Debt & Capital Lease Obligation was $0.00 Mil.

1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(0.049 / 0) / (0.015 / 0)
= /
=

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(-0.004 / 0) / (-0.004 / 0)
= /
=

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (0.381 + 1.311) / 1.693) / (1 - (0.138 + 0.507) / 0.645)
=0.000591 / 0
=

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=0 / 0
=

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(0.004 / (0.004 + 0.507)) / (0.004 / (0.004 + 1.311))
=0.007828 / 0.003042
=

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(1.408 / 0) / (0.865 / 0)
= /
=

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((0 + 0.299) / 1.693) / ((0 + 0.768) / 0.645)
=0.17661 / 1.190698
=

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(-1.399 - 0.104 - -1.478) / 1.693
=-0.014767

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Frequently Asked Questions Learn more about Beneish M-Score →
What does a Beneish M-Score of 0.00 mean?
Atomic Minerals (ATMMF) has a Beneish M-Score of 0.00 as of Jun. 24, 2026. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Atomic Minerals and its competitors. According to the industry distribution chart, Atomic Minerals ranks #999999 out of 685 companies in the Metals & Mining industry.
Is Atomic Minerals' Beneish M-Score too high?
Atomic Minerals' current Beneish M-Score is 0.00. Based on the distribution chart, Atomic Minerals ranks #999999 out of 685 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers.
How does Atomic Minerals' Beneish M-Score compare to competitors?
According to the Metals & Mining industry distribution chart, Atomic Minerals ranks #999999 out of 685 companies for Beneish M-Score. This places Atomic Minerals in the lower half of its industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Beneish M-Score for a Metals & Mining company?
A good Beneish M-Score depends on the Metals & Mining industry context. However, Beneish M-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Beneish M-Score mean?
A high Beneish M-Score can signal that a stock is expensive relative to its fundamentals. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Atomic Minerals and its competitors. Atomic Minerals's current Beneish M-Score is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Atomic Minerals stock overvalued right now?
Atomic Minerals (ATMMF) has a current Beneish M-Score of 0.00. The current Beneish M-Score is 0.00. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Beneish M-Score calculated?
Beneish M-Score is calculated from a company's financial statements. For Atomic Minerals (ATMMF), the current Beneish M-Score is 0.00 as of Jun. 24, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Atomic Minerals Business Description

Other Exchanges DO8:GermanyATOM:Canada
Address 830-1100 Melville Street, Vancouver, BC, CAN, V6E 4A6
Atomic Minerals Corp is engaged in the acquisition and exploration of mineral properties. Its projects include the Lloyd Lake Uranium Project, located in the prolific Athabasca Basin; the SC Claim Block (Delores Property); the Hamilton Lake Uranium Project; and other properties. Geographically, the company operates in Canada and the United States.