BDMMF (Burgundy Diamond Mines) Beneish M-Score : 0.00 (As of Dec. 12, 2024)

View and export this data going back to 2020. Start your Free Trial

What is Burgundy Diamond Mines Beneish M-Score?

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

The historical rank and industry rank for Burgundy Diamond Mines's Beneish M-Score or its related term are showing as below:

During the past 10 years, the highest Beneish M-Score of Burgundy Diamond Mines was 0.00. The lowest was 0.00. And the median was 0.00.

Burgundy Diamond Mines Beneish M-Score Historical Data

The historical data trend for Burgundy Diamond Mines's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

* Premium members only.

Burgundy Diamond Mines Beneish M-Score Chart

Burgundy Diamond Mines Annual Data

Trend

Jun13

Jun14

Jun15

Jun16

Jun17

Jun18

Jun19

Jun20

Jun21

Jun22

Beneish M-Score

Get a 7-Day Free Trial

Burgundy Diamond Mines Semi-Annual Data
	Dec14	Jun15	Dec15	Jun16	Dec16	Jun17	Dec17	Jun18	Dec18	Jun19	Dec19	Jun20	Dec20	Jun21	Dec21	Jun22	Dec22	Jun23	Dec23	Jun24
Beneish M-Score	Get a 7-Day Free Trial															-	-	-	-	-

Competitive Comparison of Burgundy Diamond Mines's Beneish M-Score

For the Other Precious Metals & Mining subindustry, Burgundy Diamond Mines's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Burgundy Diamond Mines's Beneish M-Score Distribution in the Metals & Mining Industry

For the Metals & Mining industry and Basic Materials sector, Burgundy Diamond Mines's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where Burgundy Diamond Mines's Beneish M-Score falls into.

Burgundy Diamond Mines Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of Burgundy Diamond Mines for today is based on a combination of the following eight different indices:

-4.84

0.92 * DSRI

0.528 * GMI

0.404 * AQI

0.892 * SGI

0.115 * DEPI

-4.84

0.92 *

0.528 *

0.404 *

0.892 *

0.115 *

0.172 * SGAI

4.679 * TATA

0.327 * LVGI

0.172 *

4.679 *

0.327 *

This Year (Jun22) TTM:

Last Year (Jun21) TTM:

Total Receivables was $0.3 Mil.
Revenue was $0.0 Mil.
Gross Profit was $0.0 Mil.
Total Current Assets was $22.5 Mil.
Total Assets was $25.4 Mil.
Property, Plant and Equipment(Net PPE) was $2.8 Mil.
Depreciation, Depletion and Amortization(DDA) was $0.1 Mil.
Selling, General, & Admin. Expense(SGA) was $4.3 Mil.
Total Current Liabilities was $1.4 Mil.
Long-Term Debt & Capital Lease Obligation was $20.3 Mil.
Net Income was $-13.6 Mil.
Gross Profit was $-0.3 Mil.
Cash Flow from Operations was $-17.6 Mil.

Total Receivables was $0.1 Mil.
Revenue was $0.0 Mil.
Gross Profit was $0.0 Mil.
Total Current Assets was $1.3 Mil.
Total Assets was $1.3 Mil.
Property, Plant and Equipment(Net PPE) was $0.0 Mil.
Depreciation, Depletion and Amortization(DDA) was $0.0 Mil.
Selling, General, & Admin. Expense(SGA) was $1.3 Mil.
Total Current Liabilities was $0.3 Mil.
Long-Term Debt & Capital Lease Obligation was $0.0 Mil.

1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI	=	(Receivables_t / Revenue_t)	/	(Receivables_t-1 / Revenue_t-1)
	=	(0.336 / 0)	/	(0.057 / 0)
	=		/
	=

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI	=	GrossMargin_t-1	/	GrossMargin_t
	=	(GrossProfit_t-1 / Revenue_t-1)	/	(GrossProfit_t / Revenue_t)
	=	(0 / 0)	/	(0 / 0)
	=		/
	=

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI	=	(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t)	/	(1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
	=	(1 - (22.513 + 2.837) / 25.35)	/	(1 - (1.33 + 0.005) / 1.335)
	=	0	/	0
	=

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI	=	Sales_t	/	Sales_t-1
	=	Revenue_t	/	Revenue_t-1
	=	0	/	0
	=

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI	=	(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1))	/	(Depreciation_t / (Depreciaton_t + PPE_t))
	=	(0.001 / (0.001 + 0.005))	/	(0.127 / (0.127 + 2.837))
	=	0.166667	/	0.042848
	=

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI	=	(SGA_t / Sales_t)	/	(SGA_t-1 /Sales_t-1)
	=	(4.292 / 0)	/	(1.261 / 0)
	=		/
	=

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI	=	((LTD_t + CurrentLiabilities_t) / TotalAssets_t)	/	((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
	=	((20.251 + 1.373) / 25.35)	/	((0 + 0.264) / 1.335)
	=	0.853018	/	0.197753
	=

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA	=	(IncomefromContinuingOperations_t	-	CashFlowsfromOperations_t)	/	TotalAssets_t
	=	(NetIncome_t - NonOperatingIncome_t	-	CashFlowsfromOperations_t)	/	TotalAssets_t
	=	(-13.559 - -0.259	-	-17.603)	/	25.35
	=	0.169744

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Burgundy Diamond Mines Beneish M-Score Related Terms

Thank you for viewing the detailed overview of Burgundy Diamond Mines's Beneish M-Score provided by GuruFocus.com. Please click on the following links to see related term pages.

Burgundy Diamond Mines Business Description

Industry

GURUFOCUS.COM » STOCK LIST » Basic Materials » Metals & Mining » Burgundy Diamond Mines Ltd (OTCPK:BDMMF) » Definitions » Beneish M-Score

Comparable Companies

Traded in Other Exchanges

BDM:Australia

Address

108 Street Georges Terrace, Level 25 , South 32 Tower, Perth, WA, AUS, 6000

Website

https://www.burgundy-diamonds.com

Burgundy Diamond Mines Ltd is an Australian diamond exploration company. The company holds interests in the Naujaat property, Ekati mine, and other operations. The Group's reportable segments comprise Rough Diamond and Polished Diamond. The company generates maximum revenue from Rough Diamonds.