MPL Plastics (BOM:526143) Beneish M-Score: 0.00 (As of Jun. 27, 2026)


BOM:526143 MPL Plastics Ltd BOM:526143
27 GF Score
Price ₹6.15
! 1 Warning Sign
View Full Analysis

What is MPL Plastics Beneish M-Score?

MPL Plastics BOM:526143 -4.50% 27 Beneish M-Score is 0.00 as of Jun. 27, 2026. GuruFocus rates BOM:526143 with a GF Score™ of 27/100. The stock has 1 warning sign investors should review. Among 373 Packaging & Containers companies, MPL Plastics ranks worse than 268096.25% on this metric.

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

The historical rank and industry rank for MPL Plastics's Beneish M-Score or its related term are showing as below:

During the past 13 years, the highest Beneish M-Score of MPL Plastics was -1.62. The lowest was -10.37. And the median was -5.12.

MPL Plastics Beneish M-Score Historical Data

* Premium members only.

The historical data trend for MPL Plastics's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

MPL Plastics Beneish M-Score Chart

MPL Plastics Annual Data
Trend Mar17 Mar18 Mar19 Mar20 Mar21 Mar22 Mar23 Mar24 Mar25 Mar26
Beneish M-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

MPL Plastics Quarterly Data
Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25 Mar26
Beneish M-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

BOM:526143 vs SW, PKG, AMCR: Beneish M-Score Comparison

For the Packaging & Containers subindustry, MPL Plastics's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

MPL Plastics Beneish M-Score vs Packaging & Containers Industry

For the Packaging & Containers industry and Consumer Cyclical sector, MPL Plastics's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where MPL Plastics's Beneish M-Score falls into.


BOM:526143
27GF Score
MPL Plastics Ltd BOM:526143
Beneish M-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

MPL Plastics Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of MPL Plastics for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * +0.528 * +0.404 * +0.892 * +0.115 *
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * +4.679 * -0.327 *
=

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Mar26) TTM:Last Year (Mar25) TTM:
Total Receivables was ₹0.00 Mil.
Revenue was ₹0.00 Mil.
Gross Profit was ₹0.00 Mil.
Total Current Assets was ₹9.00 Mil.
Total Assets was ₹23.02 Mil.
Property, Plant and Equipment(Net PPE) was ₹1.41 Mil.
Depreciation, Depletion and Amortization(DDA) was ₹0.00 Mil.
Selling, General, & Admin. Expense(SGA) was ₹0.00 Mil.
Total Current Liabilities was ₹52.29 Mil.
Long-Term Debt & Capital Lease Obligation was ₹0.00 Mil.
Net Income was ₹-1.70 Mil.
Gross Profit was ₹0.00 Mil.
Cash Flow from Operations was ₹-4.92 Mil.
 Total Receivables was ₹0.00 Mil.
Revenue was ₹0.00 Mil.
Gross Profit was ₹0.00 Mil.
Total Current Assets was ₹9.10 Mil.
Total Assets was ₹23.25 Mil.
Property, Plant and Equipment(Net PPE) was ₹1.37 Mil.
Depreciation, Depletion and Amortization(DDA) was ₹0.00 Mil.
Selling, General, & Admin. Expense(SGA) was ₹3.76 Mil.
Total Current Liabilities was ₹50.88 Mil.
Long-Term Debt & Capital Lease Obligation was ₹0.00 Mil.

1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(0 / 0) / (0 / 0)
= /
=

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(0 / 0) / (0 / 0)
= /
=

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (9.001 + 1.407) / 23.016) / (1 - (9.102 + 1.365) / 23.251)
=0.547793 / 0.549826
=

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=0 / 0
=

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(0 / (0 + 1.365)) / (0.003 / (0.003 + 1.407))
=0 / 0.002128
=

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(0 / 0) / (3.756 / 0)
= /
=

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((0 + 52.29) / 23.016) / ((0 + 50.883) / 23.251)
=2.271898 / 2.188422
=

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(-1.699 - 0 - -4.919) / 23.016
=0.139903

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Frequently Asked Questions Learn more about Beneish M-Score →
What does a Beneish M-Score of 0.00 mean?
MPL Plastics (BOM:526143) has a Beneish M-Score of 0.00 as of Jun. 27, 2026. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on MPL Plastics and its competitors. According to the industry distribution chart, MPL Plastics ranks #999999 out of 373 companies in the Packaging & Containers industry.
Is MPL Plastics' Beneish M-Score too high?
MPL Plastics' current Beneish M-Score is 0.00. Based on the distribution chart, MPL Plastics ranks #999999 out of 373 companies in the Packaging & Containers industry, which is in the bottom quartile relative to peers. Overall, MPL Plastics has a GF Score™ of 27/100, reflecting its overall financial health beyond just this single metric.
How does MPL Plastics' Beneish M-Score compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, MPL Plastics ranks #999999 out of 373 companies for Beneish M-Score. This places MPL Plastics in the lower half of its industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Beneish M-Score for a Packaging & Containers company?
A good Beneish M-Score depends on the Packaging & Containers industry context. However, Beneish M-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Beneish M-Score mean?
A high Beneish M-Score can signal that a stock is expensive relative to its fundamentals. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on MPL Plastics and its competitors. MPL Plastics's current Beneish M-Score is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is MPL Plastics stock overvalued right now?
MPL Plastics (BOM:526143) has a current Beneish M-Score of 0.00. The current Beneish M-Score is 0.00. MPL Plastics' overall GF Score™ is 27/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Beneish M-Score calculated?
Beneish M-Score is calculated from a company's financial statements. For MPL Plastics (BOM:526143), the current Beneish M-Score is 0.00 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

MPL Plastics Business Description

Address Near Classic Studio, Mira Bhayander Road, 2, Ashish Warehouse Corporation, Punjab Foundry Industrial Estate, Kashimira, Mira Road (East), District Thane, Mumbai, MH, IND, 401104
MPL Plastics Ltd manufactures thermoware products. The company is also engaged in the manufacturing of tumblers, mugs, boxes, cases and others. The company offers products such as Vacuum flasks, Casseroles, Tiffins, Water bottles, and Water Jugs.
27GF Score

Get the complete analysis for BOM:526143

Beneish M-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

₹6.15
Price