Sun Peak Metals (FRA:906) Beneish M-Score: 0.00 (As of Jul. 05, 2026)


FRA:906 Sun Peak Metals Corp FRA:906
38 GF Score
Price €0.26
! 1 Warning Sign
View Full Analysis

What is Sun Peak Metals Beneish M-Score?

Sun Peak Metals FRA:906 +3.21% 38 Beneish M-Score is 0.00 as of Jul. 05, 2026. GuruFocus rates FRA:906 with a GF Score™ of 38/100. The stock has 1 warning sign investors should review. Among 683 Metals & Mining companies, Sun Peak Metals ranks worse than 146412.74% on this metric.

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

The historical rank and industry rank for Sun Peak Metals's Beneish M-Score or its related term are showing as below:

During the past 7 years, the highest Beneish M-Score of Sun Peak Metals was 0.00. The lowest was 0.00. And the median was 0.00.

Sun Peak Metals Beneish M-Score Historical Data

* Premium members only.

The historical data trend for Sun Peak Metals's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Sun Peak Metals Beneish M-Score Chart

Sun Peak Metals Annual Data
Trend Dec19 Dec20 Dec21 Dec22 Dec23 Dec24 Dec25
Beneish M-Score
Get a 7-Day Free Trial 0.00 0.00 0.00 0.00 0.00

Sun Peak Metals Quarterly Data
Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25 Mar26
Beneish M-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

FRA:906 vs HL: Beneish M-Score Comparison

For the Other Precious Metals & Mining subindustry, Sun Peak Metals's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Sun Peak Metals Beneish M-Score vs Metals & Mining Industry

For the Metals & Mining industry and Basic Materials sector, Sun Peak Metals's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where Sun Peak Metals's Beneish M-Score falls into.


FRA:906
38GF Score
Sun Peak Metals Corp FRA:906
Beneish M-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

Sun Peak Metals Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of Sun Peak Metals for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * +0.528 * +0.404 * +0.892 * +0.115 *
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * +4.679 * -0.327 *
=

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Mar26) TTM:Last Year (Mar25) TTM:
Total Receivables was €0.13 Mil.
Revenue was 0 + 0 + 0 + 0 = €0.00 Mil.
Gross Profit was -0.011 + -0.008 + -0.007 + -0.007 = €-0.03 Mil.
Total Current Assets was €3.08 Mil.
Total Assets was €20.75 Mil.
Property, Plant and Equipment(Net PPE) was €12.79 Mil.
Depreciation, Depletion and Amortization(DDA) was €0.03 Mil.
Selling, General, & Admin. Expense(SGA) was €1.79 Mil.
Total Current Liabilities was €0.28 Mil.
Long-Term Debt & Capital Lease Obligation was €0.00 Mil.
Net Income was -1.76 + -0.492 + -0.257 + -0.261 = €-2.77 Mil.
Non Operating Income was -0.018 + -0.006 + -0.005 + -0.012 = €-0.04 Mil.
Cash Flow from Operations was -1.001 + -0.322 + -0.246 + -0.267 = €-1.84 Mil.
 Total Receivables was €0.02 Mil.
Revenue was 0 + 0 + 0 + 0 = €0.00 Mil.
Gross Profit was -0.007 + -0.057 + -0.008 + -0.009 = €-0.08 Mil.
Total Current Assets was €0.91 Mil.
Total Assets was €5.24 Mil.
Property, Plant and Equipment(Net PPE) was €0.06 Mil.
Depreciation, Depletion and Amortization(DDA) was €0.08 Mil.
Selling, General, & Admin. Expense(SGA) was €0.76 Mil.
Total Current Liabilities was €0.05 Mil.
Long-Term Debt & Capital Lease Obligation was €0.00 Mil.

1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(0.131 / 0) / (0.021 / 0)
= /
=

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(-0.081 / 0) / (-0.033 / 0)
= /
=

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (3.078 + 12.79) / 20.751) / (1 - (0.908 + 0.064) / 5.237)
=0.235314 / 0.814398
=

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=0 / 0
=

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(0.081 / (0.081 + 0.064)) / (0.033 / (0.033 + 12.79))
=0.558621 / 0.002574
=

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(1.785 / 0) / (0.758 / 0)
= /
=

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((0 + 0.281) / 20.751) / ((0 + 0.053) / 5.237)
=0.013542 / 0.01012
=

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(-2.77 - -0.041 - -1.836) / 20.751
=-0.043034

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Frequently Asked Questions Learn more about Beneish M-Score →
What does a Beneish M-Score of 0.00 mean?
Sun Peak Metals (FRA:906) has a Beneish M-Score of 0.00 as of Jul. 05, 2026. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Sun Peak Metals and its competitors. According to the industry distribution chart, Sun Peak Metals ranks #999999 out of 683 companies in the Metals & Mining industry.
Is Sun Peak Metals' Beneish M-Score too high?
Sun Peak Metals' current Beneish M-Score is 0.00. Based on the distribution chart, Sun Peak Metals ranks #999999 out of 683 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers. Overall, Sun Peak Metals has a GF Score™ of 38/100, reflecting its overall financial health beyond just this single metric.
How does Sun Peak Metals' Beneish M-Score compare to HL?
According to the Metals & Mining industry distribution chart, Sun Peak Metals ranks #999999 out of 683 companies for Beneish M-Score. This places Sun Peak Metals in the lower half of its industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Beneish M-Score for a Metals & Mining company?
A good Beneish M-Score depends on the Metals & Mining industry context. However, Beneish M-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Beneish M-Score mean?
A high Beneish M-Score can signal that a stock is expensive relative to its fundamentals. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Sun Peak Metals and its competitors. Sun Peak Metals's current Beneish M-Score is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sun Peak Metals stock overvalued right now?
Sun Peak Metals (FRA:906) has a current Beneish M-Score of 0.00. The current Beneish M-Score is 0.00. Sun Peak Metals' overall GF Score™ is 38/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Beneish M-Score calculated?
Beneish M-Score is calculated from a company's financial statements. For Sun Peak Metals (FRA:906), the current Beneish M-Score is 0.00 as of Jul. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Sun Peak Metals Business Description

Other Exchanges SUNPF:USAPEAK:Canada
Address 15782 Marine Drive, Unit 1, White Rock, BC, CAN, V4B 1E6
Sun Peak Metals Corp is engaged in the acquisition, exploration, and development of resource properties for the mining of precious or base metals. It is focused on the exploration and discovery of gold and copper targets on the Shire Project in Ethiopia and Others in Saudi Arabia. The company operates in a single segment, being mineral exploration and evaluation.
38GF Score

Get the complete analysis for FRA:906

Beneish M-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

€0.26
Price