OPHRF (Ophir Metals) Beneish M-Score: 0.00 (As of Jun. 25, 2026)


What is Ophir Metals Beneish M-Score?

Ophir Metals OPHRF +18.60% Beneish M-Score is 0.00 as of Jun. 25, 2026. The stock has 1 warning sign investors should review. Among 685 Metals & Mining companies, Ophir Metals ranks worse than 145985.26% on this metric.

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

The historical rank and industry rank for Ophir Metals's Beneish M-Score or its related term are showing as below:

During the past 13 years, the highest Beneish M-Score of Ophir Metals was 0.00. The lowest was 0.00. And the median was 0.00.

Ophir Metals Beneish M-Score Historical Data

* Premium members only.

The historical data trend for Ophir Metals's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Ophir Metals Beneish M-Score Chart

Ophir Metals Annual Data
Trend May16 May17 May18 May19 May20 May21 May22 May23 May24 May25
Beneish M-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

Ophir Metals Quarterly Data
May21 Aug21 Nov21 Feb22 May22 Aug22 Nov22 Feb23 May23 Aug23 Nov23 Feb24 May24 Aug24 Nov24 Feb25 May25 Aug25 Nov25 Feb26
Beneish M-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.00 0.00 0.00 0.00 0.00

OPHRF vs NEM, AU: Beneish M-Score Comparison

For the Gold subindustry, Ophir Metals's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Ophir Metals Beneish M-Score vs Metals & Mining Industry

For the Metals & Mining industry and Basic Materials sector, Ophir Metals's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where Ophir Metals's Beneish M-Score falls into.


Ophir Metals Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of Ophir Metals for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * +0.528 * +0.404 * +0.892 * +0.115 *
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * +4.679 * -0.327 *
=

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Feb26) TTM:Last Year (Feb25) TTM:
Total Receivables was $0.01 Mil.
Revenue was 0 + 0 + 0 + 0 = $0.00 Mil.
Gross Profit was 0 + 0 + 0 + 0 = $0.00 Mil.
Total Current Assets was $0.55 Mil.
Total Assets was $2.91 Mil.
Property, Plant and Equipment(Net PPE) was $2.35 Mil.
Depreciation, Depletion and Amortization(DDA) was $0.00 Mil.
Selling, General, & Admin. Expense(SGA) was $0.38 Mil.
Total Current Liabilities was $0.05 Mil.
Long-Term Debt & Capital Lease Obligation was $0.00 Mil.
Net Income was -0.089 + -0.126 + -0.102 + -0.114 = $-0.43 Mil.
Non Operating Income was -0.002 + -0.046 + -0.012 + 0.001 = $-0.06 Mil.
Cash Flow from Operations was -0.068 + -0.085 + -0.079 + -0.11 = $-0.34 Mil.
 Total Receivables was $0.02 Mil.
Revenue was 0 + 0 + 0 + 0 = $0.00 Mil.
Gross Profit was 0 + 0 + 0 + 0 = $0.00 Mil.
Total Current Assets was $1.14 Mil.
Total Assets was $3.15 Mil.
Property, Plant and Equipment(Net PPE) was $2.01 Mil.
Depreciation, Depletion and Amortization(DDA) was $0.00 Mil.
Selling, General, & Admin. Expense(SGA) was $0.48 Mil.
Total Current Liabilities was $0.05 Mil.
Long-Term Debt & Capital Lease Obligation was $0.00 Mil.

1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(0.01 / 0) / (0.017 / 0)
= /
=

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(0 / 0) / (0 / 0)
= /
=

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (0.552 + 2.353) / 2.907) / (1 - (1.136 + 2.014) / 3.15)
=0.000688 / 0
=

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=0 / 0
=

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(0 / (0 + 2.014)) / (0 / (0 + 2.353))
=0 / 0
=

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(0.384 / 0) / (0.484 / 0)
= /
=

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((0 + 0.053) / 2.907) / ((0 + 0.047) / 3.15)
=0.018232 / 0.014921
=

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(-0.431 - -0.059 - -0.342) / 2.907
=-0.01032

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Frequently Asked Questions Learn more about Beneish M-Score →
What does a Beneish M-Score of 0.00 mean?
Ophir Metals (OPHRF) has a Beneish M-Score of 0.00 as of Jun. 25, 2026. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Ophir Metals and its competitors. According to the industry distribution chart, Ophir Metals ranks #999999 out of 685 companies in the Metals & Mining industry.
Is Ophir Metals' Beneish M-Score too high?
Ophir Metals' current Beneish M-Score is 0.00. Based on the distribution chart, Ophir Metals ranks #999999 out of 685 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers.
How does Ophir Metals' Beneish M-Score compare to NEM and AU?
According to the Metals & Mining industry distribution chart, Ophir Metals ranks #999999 out of 685 companies for Beneish M-Score. This places Ophir Metals in the lower half of its industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Beneish M-Score for a Metals & Mining company?
A good Beneish M-Score depends on the Metals & Mining industry context. However, Beneish M-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Beneish M-Score mean?
A high Beneish M-Score can signal that a stock is expensive relative to its fundamentals. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Ophir Metals and its competitors. Ophir Metals's current Beneish M-Score is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ophir Metals stock overvalued right now?
Ophir Metals (OPHRF) has a current Beneish M-Score of 0.00. The current Beneish M-Score is 0.00. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Beneish M-Score calculated?
Beneish M-Score is calculated from a company's financial statements. For Ophir Metals (OPHRF), the current Beneish M-Score is 0.00 as of Jun. 25, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Ophir Metals Business Description

Other Exchanges W0J:GermanyOPHR:Canada
Address 595 Howe Street, Suite 206, Vancouver, BC, CAN, V6C 2T5
Ophir Metals Corp is a diversified mineral exploration company focused on the exploration and development of the Radis and Pilipas Lithium Properties in James Bay, Quebec, and the past-producing Breccia gold property located in Lemhi County, Idaho.