Nissei Plastic Industrial Co (TSE:6293) Beneish M-Score: -2.21 (As of Jun. 27, 2026)


TSE:6293 Nissei Plastic Industrial Co Ltd TSE:6293
44 GF Score
Price 円873.00
GF Value 円943.08
! 8 Warning Signs
View Full Analysis

What is Nissei Plastic Industrial Co Beneish M-Score?

Nissei Plastic Industrial Co TSE:6293 44 Beneish M-Score is -2.21 as of Jun. 27, 2026. GuruFocus rates TSE:6293 with a GF Score™ of 44/100 and a GF Value™ of 円943.08. The stock has 8 warning signs investors should review.

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Good Sign:

Beneish M-Score -2.21 no higher than -1.78, which implies that the company is unlikely to be a manipulator.

The historical rank and industry rank for Nissei Plastic Industrial Co's Beneish M-Score or its related term are showing as below:

TSE:6293' s Beneish M-Score Range Over the Past 10 Years
Min: -2.95   Med: -2.4   Max: -2.01
Current: -2.21

During the past 13 years, the highest Beneish M-Score of Nissei Plastic Industrial Co was -2.01. The lowest was -2.95. And the median was -2.40.


Nissei Plastic Industrial Co Beneish M-Score Historical Data

* Premium members only.

The historical data trend for Nissei Plastic Industrial Co's Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Nissei Plastic Industrial Co Beneish M-Score Chart

Nissei Plastic Industrial Co Annual Data
Trend Mar16 Mar17 Mar18 Mar19 Mar20 Mar21 Mar22 Mar23 Mar24 Mar25
Beneish M-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only -2.95 -2.36 -2.27 -2.22 -2.21

Nissei Plastic Industrial Co Semi-Annual Data
Mar16 Sep16 Mar17 Sep17 Mar18 Sep18 Mar19 Sep19 Mar20 Sep20 Mar21 Sep21 Mar22 Sep22 Mar23 Sep23 Mar24 Sep24 Mar25 Sep25
Beneish M-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.00 -2.22 0.00 -2.21 0.00

TSE:6293 vs GEV, ETN, PH: Beneish M-Score Comparison

For the Specialty Industrial Machinery subindustry, Nissei Plastic Industrial Co's Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Nissei Plastic Industrial Co Beneish M-Score vs Industrial Products Industry

For the Industrial Products industry and Industrials sector, Nissei Plastic Industrial Co's Beneish M-Score distribution charts can be found below:

* The bar in red indicates where Nissei Plastic Industrial Co's Beneish M-Score falls into.


TSE:6293
44GF Score
Nissei Plastic Industrial Co Ltd TSE:6293
Beneish M-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

Nissei Plastic Industrial Co Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of Nissei Plastic Industrial Co for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * 1.0484+0.528 * 1.035+0.404 * 0.9953+0.892 * 1.009+0.115 * 0.894
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * 1+4.679 * 0.045098-0.327 * 0.988
=-2.21

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Mar25) TTM:Last Year (Mar24) TTM:
Total Receivables was 円9,962 Mil.
Revenue was 円47,493 Mil.
Gross Profit was 円13,650 Mil.
Total Current Assets was 円60,491 Mil.
Total Assets was 円86,479 Mil.
Property, Plant and Equipment(Net PPE) was 円20,536 Mil.
Depreciation, Depletion and Amortization(DDA) was 円1,802 Mil.
Selling, General, & Admin. Expense(SGA) was 円0 Mil.
Total Current Liabilities was 円31,362 Mil.
Long-Term Debt & Capital Lease Obligation was 円10,219 Mil.
Net Income was 円76 Mil.
Gross Profit was 円0 Mil.
Cash Flow from Operations was 円-3,824 Mil.
Total Receivables was 円9,417 Mil.
Revenue was 円47,068 Mil.
Gross Profit was 円14,002 Mil.
Total Current Assets was 円59,464 Mil.
Total Assets was 円83,608 Mil.
Property, Plant and Equipment(Net PPE) was 円18,848 Mil.
Depreciation, Depletion and Amortization(DDA) was 円1,465 Mil.
Selling, General, & Admin. Expense(SGA) was 円0 Mil.
Total Current Liabilities was 円28,320 Mil.
Long-Term Debt & Capital Lease Obligation was 円12,370 Mil.




1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(9962 / 47493) / (9417 / 47068)
=0.209757 / 0.200072
=1.0484

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(14002 / 47068) / (13650 / 47493)
=0.297484 / 0.287411
=1.035

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (60491 + 20536) / 86479) / (1 - (59464 + 18848) / 83608)
=0.063044 / 0.063343
=0.9953

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=47493 / 47068
=1.009

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(1465 / (1465 + 18848)) / (1802 / (1802 + 20536))
=0.072121 / 0.08067
=0.894

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(0 / 47493) / (0 / 47068)
=0 / 0
=1

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((10219 + 31362) / 86479) / ((12370 + 28320) / 83608)
=0.480822 / 0.486676
=0.988

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(76 - 0 - -3824) / 86479
=0.045098

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

Nissei Plastic Industrial Co has a M-score of -2.21 suggests that the company is unlikely to be a manipulator.

Frequently Asked Questions Learn more about Beneish M-Score →
What does a Beneish M-Score of -2.21 mean?
Nissei Plastic Industrial Co (TSE:6293) has a Beneish M-Score of -2.21 as of Jun. 27, 2026. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Nissei Plastic Industrial Co and its competitors.
Is Nissei Plastic Industrial Co's Beneish M-Score too high?
Nissei Plastic Industrial Co's current Beneish M-Score is -2.21. Overall, Nissei Plastic Industrial Co has a GF Score™ of 44/100, reflecting its overall financial health beyond just this single metric.
How does Nissei Plastic Industrial Co's Beneish M-Score compare to GEV and ETN?
Nissei Plastic Industrial Co's Beneish M-Score of -2.21 can be compared against companies in the Industrial Products industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Beneish M-Score for an Industrial Products company?
A good Beneish M-Score depends on the Industrial Products industry context. However, Beneish M-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Beneish M-Score mean?
A high Beneish M-Score can signal that a stock is expensive relative to its fundamentals. The Beneish M-score measures the likelihood of earnings manipulation. View historical data on Nissei Plastic Industrial Co and its competitors. Nissei Plastic Industrial Co's current Beneish M-Score is -2.21. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Nissei Plastic Industrial Co stock overvalued right now?
Nissei Plastic Industrial Co (TSE:6293) has a current Beneish M-Score of -2.21. The stock's GF Value™ is 円943.08, compared to a current price of 円873.00 — trading 7.4% below its estimated fair value. The current Beneish M-Score is -2.21. Nissei Plastic Industrial Co's overall GF Score™ is 44/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Beneish M-Score calculated?
Beneish M-Score is calculated from a company's financial statements. For Nissei Plastic Industrial Co (TSE:6293), the current Beneish M-Score is -2.21 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Nissei Plastic Industrial Co (TSE:6293) Overvalued in 2026?

Based on GuruFocus' analysis, Nissei Plastic Industrial Co stock appears to be undervalued. The current stock price of 円873.00 is trading 7.4% below its estimated GF Value™ of 円943.08.

Key valuation signals for TSE:6293:

  • Beneish M-Score: -2.21
  • GF Value™: 円943.08 vs. price of 円873.00 (7.4% below fair value)
  • GF Score™: 44/100 with 8 warning signs

No single metric tells the full story. See the TSE:6293 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


Nissei Plastic Industrial Co Business Description

Address 2110 Minamijo, Sakaki-machi, Hanishina-gun, Nagano-ken, Nagano, JPN, 389-0693
Nissei Plastic Industrial Co Ltd is an injection molding machine manufacturer. Its products made by injection molding machines are used to provide food, medical care, and a variety of other goods to consumers around the world. The company's products include Horizontal Injection Molding Machine, Vertical Injection Molding Machine, Special Injection Molding Machine, and Quality & Production Control System.
44GF Score

Get the complete analysis for TSE:6293

Beneish M-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

円873.00
Price
円943.08
GF Value