Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
In calculating the Net-Net Working Capital (NNWC), Benjamin Graham assumed that a company's accounts receivable is only worth 75% its value, its inventory is only worth 50% of its value, but its liabilities have to be paid in full. In addition, Graham believed that preferred stock belongs on the liability side of the balance sheet, not as part of capital and surplus. This is a conservative way of estimating the company's value.
Hunan Tyen Machinery Co's Net-Net Working Capital for the quarter that ended in Jun. 2026 was ¥-0.07.
The industry rank for Hunan Tyen Machinery Co's Net-Net Working Capital or its related term are showing as below:
SHSE:600698's Price-to-Net-Net-Working-Capital is not ranked *
in the Industrial Products industry.
Industry Median: 8.26 * Ranked among companies with meaningful Price-to-Net-Net-Working-Capital only.
Hunan Tyen Machinery Co (SHSE:600698) Net-Net Working Capital Explanation
One research study, covering the years 1970 through 1983 showed that portfolios picked at the beginning of each year, and held for one year, returned 29.4 percent, on average, over the 13-year period, compared to 11.5 percent for the S&P 500 Index. Other studies of Graham's strategy produced similar results.
Benjamin Graham looked for companies whose market values were less than two-thirds of their net-net value. They are collected under our Net-Net screener.
Hunan Tyen Machinery Co Net-Net Working Capital Related Terms
Hunan Tyen Machinery Co Net-Net Working Capital Historical Data
* Premium members only.
The historical data trend for Hunan Tyen Machinery Co's Net-Net Working Capital can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Hunan Tyen Machinery Co Net-Net Working Capital Chart
SHSE:600698 vs GEV, ETN, PH: Net-Net Working Capital Comparison
For the Specialty Industrial Machinery subindustry, Hunan Tyen Machinery Co's Price-to-Net-Net-Working-Capital, along with its competitors' market caps and Price-to-Net-Net-Working-Capital data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Hunan Tyen Machinery Co Price-to-Net-Net-Working-Capital vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Hunan Tyen Machinery Co's Price-to-Net-Net-Working-Capital distribution charts can be found below:
* The bar in red indicates where Hunan Tyen Machinery Co's Price-to-Net-Net-Working-Capital falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In calculating the Net-Net Working Capital (NNWC), Benjamin Graham assumed that a company's accounts receivable is only worth 75% its value, its inventory is only worth 50% of its value, but its liabilities have to be paid in full.
In addition, Graham believed that preferred stock belongs on the liability side of the balance sheet, not as part of capital and surplus. In "Security Analysis", preferred stock is dubbed "an imperfect creditorship position" that is best placed on the balance sheet alongside funded debt.
This is a conservative way of estimating the company's value.
What does a Net-Net Working Capital of ¥-0.07 mean?
Hunan Tyen Machinery Co (SHSE:600698) has a Net-Net Working Capital of ¥-0.07 as of Jun. 2026. Ben Graham defined net-net working capital as the per-share sum of cash, 75% of receivables and 50% of inventory less total liabilities. View historical data on Hunan Tyen Machinery Co According to the industry distribution chart, Hunan Tyen Machinery Co ranks #999999 out of 1315 companies in the Industrial Products industry.
Is Hunan Tyen Machinery Co's Net-Net Working Capital too high?
Hunan Tyen Machinery Co's current Net-Net Working Capital is ¥-0.07. Based on the distribution chart, Hunan Tyen Machinery Co ranks #999999 out of 1315 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Hunan Tyen Machinery Co has a GF Score™ of 59/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Hunan Tyen Machinery Co's Net-Net Working Capital compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Hunan Tyen Machinery Co ranks #999999 out of 1315 companies for Net-Net Working Capital. This places Hunan Tyen Machinery Co in the lower half of its industry. The industry median Net-Net Working Capital is 8.26. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Net-Net Working Capital for an Industrial Products company?
The median Net-Net Working Capital among Industrial Products companies is 8.26, based on 1,315 companies in the industry. Companies in the top quartile (top 25%) have a Net-Net Working Capital significantly above this median, while those in the bottom quartile fall well below. However, Net-Net Working Capital should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Net-Net Working Capital mean?
A high Net-Net Working Capital can signal that a stock is expensive relative to its fundamentals. Ben Graham defined net-net working capital as the per-share sum of cash, 75% of receivables and 50% of inventory less total liabilities. View historical data on Hunan Tyen Machinery Co For the Industrial Products industry, the median Net-Net Working Capital is 8.26 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Hunan Tyen Machinery Co's current Net-Net Working Capital is ¥-0.07. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Hunan Tyen Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Hunan Tyen Machinery Co (SHSE:600698) is currently considered Modestly Overvalued. The stock's GF Value™ is ¥6.96, compared to a current price of ¥7.91 — trading 13.6% above its estimated fair value. The current Net-Net Working Capital is ¥-0.07. Hunan Tyen Machinery Co's overall GF Score™ is 59/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Net-Net Working Capital calculated?
Net-Net Working Capital is calculated from a company's financial statements. For Hunan Tyen Machinery Co (SHSE:600698), the current Net-Net Working Capital is ¥-0.07 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Hunan Tyen Machinery Co (SHSE:600698) Overvalued in 2026?
Based on GuruFocus' analysis, Hunan Tyen Machinery Co stock appears to be overvalued.
The current stock price of ¥7.91 is trading 13.6% above its estimated GF Value™ of ¥6.96.
GuruFocus considers Hunan Tyen Machinery Co to be Modestly Overvalued.
Key valuation signals for SHSE:600698:
Net-Net Working Capital: ¥-0.07
GF Value™: ¥6.96 vs. price of ¥7.91 (13.6% above fair value)
No single metric tells the full story. See the SHSE:600698 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Hunan Tyen Machinery Co Ltd is engaged in research and development, production and sales of engine components such as exhaust turbochargers, engine valves, and cooling fans. The company is also engaged in design, development, production and sales of superchargers, piston rings, cooling fans, thermostats, valves and other engine parts.
59GF Score
Get the complete analysis for SHSE:600698
Net-Net Working Capital is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600698 has been successfully added to your 
