Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Core Molding TechnologiesFRA:XQN -0.89%31 OCF Yield % is 7.21 as of Aug. 20, 2026, which is 53% below its 10-year median of 15.45. GuruFocus rates FRA:XQN with a GF Score™ of 31/100 and a GF Value™ of €12.67 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 1,605 Chemicals companies, Core Molding Technologies ranks better than 60.56% on this metric.
OCF Yield % is calculated as Cash Flow from Operations divided by Market Capitalization. It is a financial solvency ratio that compares the operating cash flow a company is expected to earn against its market value.
Similar to Earnings Yield %, OCF Yield % is financial solvency ratio. A lower ratio suggests a less attractive investment, indicating that investors might not receive substantial returns in proportion to their investment. Conversely, a high operating cash flow yield signals that a company generates sufficient cash to comfortably meet its debts, obligations, and dividend payments, making it a promising investment choice.
Core Molding Technologies OCF Yield % Related Terms
Core Molding Technologies OCF Yield % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Chemicals subindustry, Core Molding Technologies's OCF Yield %, along with its competitors' market caps and OCF Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Core Molding Technologies OCF Yield % vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Core Molding Technologies's OCF Yield % distribution charts can be found below:
* The bar in red indicates where Core Molding Technologies's OCF Yield % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Core Molding Technologies (FRA:XQN) has a OCF Yield % of 7.21 as of Aug. 20, 2026. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Core Molding Technologies and its competitors. This is 53% below median its historical median of 15.45. According to the industry distribution chart, Core Molding Technologies ranks #633 out of 1605 companies in the Chemicals industry, placing it in the top 39.4%.
Is Core Molding Technologies' OCF Yield % too high?
Core Molding Technologies' current OCF Yield % of 7.21 is 53% below median its 10-year median of 15.45. The Chemicals industry median OCF Yield % is 4.95. Core Molding Technologies' value of 7.21 is 45.7% above this industry median. Based on the distribution chart, Core Molding Technologies ranks #633 out of 1605 companies in the Chemicals industry, which is above the industry midpoint. Overall, Core Molding Technologies has a GF Score™ of 31/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Core Molding Technologies' OCF Yield % compare to FF and HDSN?
According to the Chemicals industry distribution chart, Core Molding Technologies ranks #633 out of 1605 companies for OCF Yield %. This puts Core Molding Technologies in the upper half of its industry. The industry median OCF Yield % is 4.95. Core Molding Technologies' value of 7.21 is 45.7% above this benchmark. While the company's 10-year median is 15.45 vs. the industry median of 4.95, Core Molding Technologies has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good OCF Yield % for a Chemicals company?
The median OCF Yield % among Chemicals companies is 4.95, based on 1,605 companies in the industry. Companies in the top quartile (top 25%) have a OCF Yield % significantly above this median, while those in the bottom quartile fall well below. However, OCF Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Core Molding Technologies's current OCF Yield % of 7.21 is 45.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high OCF Yield % mean?
A high OCF Yield % can signal that a stock is expensive relative to its fundamentals. OCF Yield is calculated as Cash Flow from Operations divided by Market Capitalization. View historical data on Core Molding Technologies and its competitors. For the Chemicals industry, the median OCF Yield % is 4.95 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Core Molding Technologies's current OCF Yield % is 7.21, which is 53% below median its own 10-year median of 15.45. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Core Molding Technologies stock overvalued right now?
Based on GuruFocus' analysis, Core Molding Technologies (FRA:XQN) is currently considered Significantly Overvalued. The stock's GF Value™ is €12.67, compared to a current price of €22.20 — trading 75.2% above its estimated fair value. The current OCF Yield % is 7.21, which is 53% below median its 10-year median of 15.45 and 45.7% above the Chemicals industry median of 4.95. Core Molding Technologies' overall GF Score™ is 31/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is OCF Yield % calculated?
OCF Yield % is calculated from a company's financial statements. For Core Molding Technologies (FRA:XQN), the current OCF Yield % is 7.21 as of Aug. 20, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Core Molding Technologies (FRA:XQN) Overvalued in 2026?
Based on GuruFocus' analysis, Core Molding Technologies stock appears to be overvalued.
The current stock price of €22.20 is trading 75.2% above its estimated GF Value™ of €12.67.
GuruFocus considers Core Molding Technologies to be Significantly Overvalued.
Key valuation signals for FRA:XQN:
OCF Yield %: 7.21 (53% below median its 10-year median of 15.45)
GF Value™: €12.67 vs. price of €22.20 (75.2% above fair value)
Industry Position: 45.7% above the Chemicals median (#633 of 1605)
No single metric tells the full story. See the FRA:XQN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Core Molding Technologies Inc operates in the engineered materials market as one operating segment as a molder of thermoplastic and thermoset structural products. It produces and sells molded products for varied markets, including medium and heavy-duty trucks, automobiles, power sports, construction and agriculture, building products, and other industrial markets. The processes include compression molding of sheet molding compound (SMC), resin transfer molding (RTM), liquid molding of dicyclopentadiene (DCPD), spray-up and hand-lay-up, direct long-fiber thermoplastics (D-LFT) and structural foam and structural web injection molding (SIM). It operates operates in Columbus, Ohio; Gaffney, South Carolina; Winona, Minnesota; Matamoros and Escobedo, Mexico; and Cobourg, Ontario, Canada.
31GF Score
Get the complete analysis for FRA:XQN
OCF Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:XQN has been successfully added to your 
