GURUFOCUS.COM » STOCK LIST » Basic Materials » Steel » Sahamit Machinery PCL (BKK:SMIT) » Definitions » Owner Earnings per Share (TTM)

Sahamit Machinery PCL (BKK:SMIT) Owner Earnings per Share (TTM) : 0.49 (As of Mar. 2024)


View and export this data going back to 2005. Start your Free Trial

What is Sahamit Machinery PCL Owner Earnings per Share (TTM)?

In 1986 Berkshire Hathaway Shareholder Letter, Warren Buffett defined owner earnings as follows:

"These represent (a) reported earnings plus (b) depreciation, depletion, amortization, and certain other non-cash charges...less (c) the average annual amount of capitalized expenditures for plant and equipment, etc. that the business requires to fully maintain its long-term competitive position and its unit volume (If the business requires additional working capital to maintain its competitive position and unit volume, the increment also should be included in (c))...Our owner-earnings equation does not yield the deceptively precise figures provided by GAAP, since (c) must be a guess - and one sometimes very difficult to make. Despite this problem, we consider the owner earnings figure, not the GAAP figure, to be the relevant item for valuation purposes - both for investors in buying stocks and for managers in buying entire businesses...All of this points up the absurdity of the 'cash flow' numbers that are often set forth in Wall Street reports. These numbers routinely include (a) plus (b) - but do not subtract (c)."

Sahamit Machinery PCL's Owner Earnings per Share (TTM) ended in Mar. 2024 was ฿0.49. It's Price-to-Owner-Earnings ratio for today is 9.14.


The historical rank and industry rank for Sahamit Machinery PCL's Owner Earnings per Share (TTM) or its related term are showing as below:

BKK:SMIT' s Price-to-Owner-Earnings Range Over the Past 10 Years
Min: 3.9   Med: 7.95   Max: 50.41
Current: 9.24


During the past 13 years, the highest Price-to-Owner-Earnings ratio of Sahamit Machinery PCL was 50.41. The lowest was 3.90. And the median was 7.95.


BKK:SMIT's Price-to-Owner-Earnings is ranked better than
54.57% of 317 companies
in the Steel industry
Industry Median: 10.34 vs BKK:SMIT: 9.24

Sahamit Machinery PCL's Earnings per Share (Diluted) for the three months ended in Mar. 2024 was ฿0.07. Its Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Mar. 2024 was ฿0.24. It's PE Ratio ratio for today is 18.67.

Sahamit Machinery PCL's EPS without NRI for the three months ended in Mar. 2024 was ฿0.06. Its EPS without NRI for the trailing twelve months (TTM) ended in Mar. 2024 was ฿0.24. It's PE Ratio without NRI ratio for today is 18.67.


Sahamit Machinery PCL Owner Earnings per Share (TTM) Historical Data

The historical data trend for Sahamit Machinery PCL's Owner Earnings per Share (TTM) can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

* Premium members only.

Sahamit Machinery PCL Owner Earnings per Share (TTM) Chart

Sahamit Machinery PCL Annual Data
Trend Dec14 Dec15 Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23
Owner Earnings per Share (TTM)
Get a 7-Day Free Trial Premium Member Only Premium Member Only 0.57 0.61 0.17 0.62 0.64

Sahamit Machinery PCL Quarterly Data
Jun19 Sep19 Dec19 Mar20 Jun20 Sep20 Dec20 Mar21 Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24
Owner Earnings per Share (TTM) Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.74 0.79 0.78 0.64 0.49

Competitive Comparison of Sahamit Machinery PCL's Owner Earnings per Share (TTM)

For the Steel subindustry, Sahamit Machinery PCL's Price-to-Owner-Earnings, along with its competitors' market caps and Price-to-Owner-Earnings data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Sahamit Machinery PCL's Price-to-Owner-Earnings Distribution in the Steel Industry

For the Steel industry and Basic Materials sector, Sahamit Machinery PCL's Price-to-Owner-Earnings distribution charts can be found below:

* The bar in red indicates where Sahamit Machinery PCL's Price-to-Owner-Earnings falls into.



Sahamit Machinery PCL Owner Earnings per Share (TTM) Calculation

In 1986 Berkshire Hathaway Shareholder Letter, Warren Buffett defined owner earnings as follows:

"These represent (a) reported earnings plus (b) depreciation, depletion, amortization, and certain other non-cash charges...less (c) the average annual amount of capitalized expenditures for plant and equipment, etc. that the business requires to fully maintain its long-term competitive position and its unit volume. (If the business requires additional working capital to maintain its competitive position and unit volume, the increment also should be included in (c))...Our owner-earnings equation does not yield the deceptively precise figures provided by GAAP, since (c) must be a guess - and one sometimes very difficult to make. Despite this problem, we consider the owner earnings figure, not the GAAP figure, to be the relevant item for valuation purposes - both for investors in buying stocks and for managers in buying entire businesses...All of this points up the absurdity of the 'cash flow' numbers that are often set forth in Wall Street reports. These numbers routinely include (a) plus (b) - but do not subtract (c)."

To make it simple, then you will have:

Owner Earnings per Share (TTM) = (Net Income + Depreciation, Depletion and Amortization + Change In Deferred Tax - 5Y Average of Maintenance Capital Expenditure + Change In Working Capital) / Shares Outstanding (Diluted Average)

Sahamit Machinery PCL's Owner Earnings per Share (TTM) Calculation:

TTM / Last Quarter Average of Last 20 Quarters
Net Income 128
Depreciation, Depletion and Amortization 60
Change In Deferred Tax 26
5Y Average of Maintenance Capital Expenditure 54
Change In Working Capital 97
Shares Outstanding (Diluted Average) 530

1. Start with "Net Income" from income statement. Sahamit Machinery PCL's Net Income for the trailing twelve months (TTM) ended in Mar. 2024 was ฿128 Mil.

2. "Depreciation, Depletion and Amortization" is from cashflow statement. Sahamit Machinery PCL's Depreciation, Depletion and Amortization for the trailing twelve months (TTM) ended in Mar. 2024 was ฿60 Mil. This needs to be added back because company does not actually need to pay cash for it. It is a non-cash item.

3. Other non-cash charges usually include "Stock Based Compensation" and "Change In Deferred Tax":
However, to be conservative, GuruFocus will not add Stock Based Compensation back to net income. Sahamit Machinery PCL's Change In Deferred Tax for the trailing twelve months (TTM) ended in Mar. 2024 was ฿26 Mil.

4. Average maintenance capital expenditure over a business/industry cycle: 5-Year Average Maintenance Capital Expenditure = ฿54 Mil

It is usually best to take a long-term average of maintenance capital expenditure. Ideally this would be as long as 10 years and include at least one economic downturn. However, since many companies do not have as long as 10-year history, here GuruFocus uses the latest 5 years data to do the calculation. To smooth out unusual years but reflect recent developments, we take an average of the 5 year maintenance capital expenditure.

The following shows how to get maintenance capital expenditure.

First, calculate the revenue change regarding to the previous quarter. If the revenue decreased from the previous quarter, then the Maintenance Capital Expenditure = Capital Expenditure (positive).
Second, if the revenue increased from the previous quarter, then calculate the percentage of Net PPE as of corresponding Revenue.
Growth Capital Expenditure = Percentage of Property, Plant and Equipment as of corresponding Revenue * Revenue Increase
Third, calculate Capital Expenditure (positive) - Growth Capital Expenditure.
If [Capital Expenditure (positive) - Growth Capital Expenditure] was negative, then the Maintenance Capital Expenditure = Capital Expenditure (positive).
If [Capital Expenditure (positive) - Growth Capital Expenditure] was positive, then the Maintenance Capital Expenditure = Capital Expenditure (positive) - Growth Capital Expenditure.
Fourth, get the average of the 5 years maintenance capital expenditure.

Sahamit Machinery PCL's 5-Year Average Maintenance Capital Expenditure = ฿54 Mil

5. "Change In Working Capital" is from cashflow statement. Sahamit Machinery PCL's Change In Working Capital for the trailing twelve months (TTM) ended in Mar. 2024 was ฿97 Mil.
Note: GuruFocus' Change in Working Capital is provided by Morningstar. It is calculated by adding the items under "Change in operating assets and liabilities" (may refer to a different name for different company) section in Cash Flow Statement from original financial report. And sometimes it includes non-current parts of assets and liabilities.

6. Sahamit Machinery PCL's Shares Outstanding (Diluted Average) for the months ended in Mar. 2024 was 530.000 Mil.

Sahamit Machinery PCL's Onwer Earnings Per Share for Mar. 2024 is calculated as:

Owner Earnings per Share (TTM)
=( Net Income+Depreciation, Depletion and Amortization+Change In Deferred Tax
=( 127.61 +60.377+25.707
-5Y Avg of Maintenance CAPEX+Change In Working Capital )/Shares Outstanding (Diluted Average)
-53.604028339698+97.21)/530.000
=0.49

Price-to-Owner-Earnings=Current Price/Owner Earnings per Share (TTM)
=4.48/0.49
=9.14

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.


Be Aware

Assumption: Companies usually do not report maintenance capital expenditures and growth capital expenditures separately. Here we use estimated numbers and average them over 5 years. The method to estimate maintenance capital expenditures can be found in above part 4.

Note: GuruFocus' Change In Working Capital is provided by Morningstar. It is calculated by adding the items under "Change in operating assets and liabilities" (may refer to a different name for different company) section in Cash Flow Statement from original financial report. And it includes non-current parts of assets and liabilities.


Sahamit Machinery PCL Owner Earnings per Share (TTM) Related Terms

Thank you for viewing the detailed overview of Sahamit Machinery PCL's Owner Earnings per Share (TTM) provided by GuruFocus.com. Please click on the following links to see related term pages.


Sahamit Machinery PCL (BKK:SMIT) Business Description

Industry
Traded in Other Exchanges
N/A
Address
42, 48 Soi chokchaijongjumroen Rama 3 Road, Bangpongpang, Yannawa, Bangkok, THA, 10120
Sahamit Machinery PCL is a thailand-based company engaged in the distribution of industrial machinery and equipment. It operates in five product groups: special steels, machine tools and tooling, pulp and paper, machinery and equipment for wood processing, and electrical engineering. The business segments of the group are; Steel and Heat treatment, Machine tools and Tooling and Others. Steel and Heat treatment include special tool steels, carbonitriding, Annealing, machinery, and carbon steels contribute majority revenue of the firm. Machine tools and tooling products include electrical discharge machine, milling cutters, and inserts for milling. It mainly operates in Thailand, and derives main revenue from the Steel and Heat treatment segment.

Sahamit Machinery PCL (BKK:SMIT) Headlines

From GuruFocus

SCHMITT INDUSTRIES ANNOUNCES AMPLE HILLS FURLOUGH

By PRNewswire PRNewswire 12-19-2022

SCHMITT INVESTOR ALERT

By PRNewswire PRNewswire 12-09-2022