Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Sahamit Machinery PCLBKK:SMIT 74 Debt-to-EBITDA is 0.05 as of Jun. 2026, which is 400% above its 10-year median of 0.01. GuruFocus rates BKK:SMIT with a GF Score™ of 74/100 and a GF Value™ of ฿3.74 (Fairly Valued). The stock has 3 warning signs investors should review. Among 497 Steel companies, Sahamit Machinery PCL ranks better than 96.18% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Sahamit Machinery PCL's Debt-to-EBITDA or its related term are showing as below:
BKK:SMIT'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0 Med: 0.01 Max: 0.06
Current: 0.06
During the past 13 years, the highest Debt-to-EBITDA Ratio of Sahamit Machinery PCL was 0.06. The lowest was 0.00. And the median was 0.01.
BKK:SMIT's Debt-to-EBITDA is ranked better than 96.18% of 497
companies
in the Steel industry
Industry Median: 2.74
vs BKK:SMIT: 0.06
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Sahamit Machinery PCL Debt-to-EBITDA Related Terms
Sahamit Machinery PCL Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Sahamit Machinery PCL's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:SMIT vs NUE, STLD, RS: Debt-to-EBITDA Comparison
For the Steel subindustry, Sahamit Machinery PCL's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sahamit Machinery PCL Debt-to-EBITDA vs Steel Industry
For the Steel industry and Basic Materials sector, Sahamit Machinery PCL's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Sahamit Machinery PCL's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Sahamit Machinery PCL (BKK:SMIT) has a Debt-to-EBITDA of 0.05 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Sahamit Machinery PCL. This is 400% above median its historical median of 0.01. According to the industry distribution chart, Sahamit Machinery PCL ranks #19 out of 497 companies in the Steel industry, placing it in the top 3.8%.
Is Sahamit Machinery PCL's Debt-to-EBITDA too high?
Sahamit Machinery PCL's current Debt-to-EBITDA of 0.05 is 400% above median its 10-year median of 0.01. The Steel industry median Debt-to-EBITDA is 2.74. Sahamit Machinery PCL's value of 0.05 is 98.2% below this industry median. Based on the distribution chart, Sahamit Machinery PCL ranks #19 out of 497 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Sahamit Machinery PCL has a GF Score™ of 74/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sahamit Machinery PCL's Debt-to-EBITDA compare to NUE and STLD?
According to the Steel industry distribution chart, Sahamit Machinery PCL ranks #19 out of 497 companies for Debt-to-EBITDA. This places Sahamit Machinery PCL in the top 4% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 2.74. Sahamit Machinery PCL's value of 0.05 is 98.2% below this benchmark. While the company's 10-year median is 0.01 vs. the industry median of 2.74, Sahamit Machinery PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Steel company?
The median Debt-to-EBITDA among Steel companies is 2.74, based on 497 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sahamit Machinery PCL's current Debt-to-EBITDA of 0.05 is 98.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Sahamit Machinery PCL. For the Steel industry, the median Debt-to-EBITDA is 2.74 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sahamit Machinery PCL's current Debt-to-EBITDA is 0.05, which is 400% above median its own 10-year median of 0.01. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sahamit Machinery PCL stock overvalued right now?
Based on GuruFocus' analysis, Sahamit Machinery PCL (BKK:SMIT) is currently considered Fairly Valued. The stock's GF Value™ is ฿3.74, compared to a current price of ฿3.62 — trading 3.2% below its estimated fair value. The current Debt-to-EBITDA is 0.05, which is 400% above median its 10-year median of 0.01 and 98.2% below the Steel industry median of 2.74. Sahamit Machinery PCL's overall GF Score™ is 74/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Sahamit Machinery PCL (BKK:SMIT), the current Debt-to-EBITDA is 0.05 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sahamit Machinery PCL (BKK:SMIT) Overvalued in 2026?
Based on GuruFocus' analysis, Sahamit Machinery PCL stock appears to be undervalued.
The current stock price of ฿3.62 is trading 3.2% below its estimated GF Value™ of ฿3.74.
GuruFocus considers Sahamit Machinery PCL to be Fairly Valued.
Key valuation signals for BKK:SMIT:
Debt-to-EBITDA: 0.05 (400% above median its 10-year median of 0.01)
GF Value™: ฿3.74 vs. price of ฿3.62 (3.2% below fair value)
Industry Position: 98.2% below the Steel median (#19 of 497)
No single metric tells the full story. See the BKK:SMIT stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sahamit Machinery PCL is engaged in the distribution of industrial machinery and equipment. The business segments of the group are; Steel and Heat treatment, Machine tools and Tooling and Others consisting of Pulp & paper, Electrical engineering and Machineries and equipment for wood industry. The company mainly operates in Thailand, and derives main revenue from the Steel and Heat treatment segment.
74GF Score
Get the complete analysis for BKK:SMIT
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:SMIT has been successfully added to your 
