Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
BJSE:920768's Dividend Payout Ratio is ranked better than 58.92% of 1699
companies
in the Industrial Products industry
Industry Median: 0.36
vs BJSE:920768: 0.31
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co (BJSE:920768) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co Dividend Payout Ratio Related Terms
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co Dividend Payout Ratio Chart
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co Annual Data
BJSE:920768 vs ATI, CRS, MLI: Dividend Payout Ratio Comparison
For the Metal Fabrication subindustry, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co Dividend Payout Ratio vs Industrial Products Industry
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co (BJSE:920768) has a Dividend Payout Ratio of 1.10 as of Jun. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Zhuhai Speedbird PVC Film Laminated Metal Sheet Co and its competitors. This is 38% above median its historical median of 0.80. Over the past decade, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's Dividend Payout Ratio has ranged from 0.31 to 0.80. According to the industry distribution chart, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co ranks #698 out of 1699 companies in the Industrial Products industry, placing it in the top 41.1%.
Is Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's Dividend Payout Ratio too high?
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's current Dividend Payout Ratio of 1.10 is 38% above median its 10-year median of 0.80. Over the past 10 years, this metric has ranged from a low of 0.31 to a high of 0.80. The Industrial Products industry median Dividend Payout Ratio is 0.36. Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's value of 1.10 is 205.6% above this industry median. Based on the distribution chart, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co ranks #698 out of 1699 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co has a GF Score™ of 77/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's Dividend Payout Ratio compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co ranks #698 out of 1699 companies for Dividend Payout Ratio. This puts Zhuhai Speedbird PVC Film Laminated Metal Sheet Co in the upper half of its industry. The industry median Dividend Payout Ratio is 0.36. Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's value of 1.10 is 205.6% above this benchmark. Historically, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's own Dividend Payout Ratio has ranged from 0.31 to 0.80 over the past decade. While the company's 10-year median is 0.80 vs. the industry median of 0.36, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.36, based on 1,699 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's current Dividend Payout Ratio of 1.10 is 205.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Zhuhai Speedbird PVC Film Laminated Metal Sheet Co and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.36 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's current Dividend Payout Ratio is 1.10, which is 38% above median its own 10-year median of 0.80. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Zhuhai Speedbird PVC Film Laminated Metal Sheet Co stock overvalued right now?
Based on GuruFocus' analysis, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co (BJSE:920768) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥8.46, compared to a current price of ¥7.60 — trading 10.2% below its estimated fair value. The current Dividend Payout Ratio is 1.10, which is 38% above median its 10-year median of 0.80 and 205.6% above the Industrial Products industry median of 0.36. Zhuhai Speedbird PVC Film Laminated Metal Sheet Co's overall GF Score™ is 77/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Zhuhai Speedbird PVC Film Laminated Metal Sheet Co (BJSE:920768), the current Dividend Payout Ratio is 1.10 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Zhuhai Speedbird PVC Film Laminated Metal Sheet Co (BJSE:920768) Overvalued in 2026?
Based on GuruFocus' analysis, Zhuhai Speedbird PVC Film Laminated Metal Sheet Co stock appears to be undervalued.
The current stock price of ¥7.60 is trading 10.2% below its estimated GF Value™ of ¥8.46.
GuruFocus considers Zhuhai Speedbird PVC Film Laminated Metal Sheet Co to be Modestly Undervalued.
Key valuation signals for BJSE:920768:
Dividend Payout Ratio: 1.10 (38% above median its 10-year median of 0.80)
GF Value™: ¥8.46 vs. price of ¥7.60 (10.2% below fair value)
Industry Position: 205.6% above the Industrial Products median (#698 of 1699)
No single metric tells the full story. See the BJSE:920768 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Zhuhai Speedbird PVC Film Laminated Metal Sheet Co Ltd is involved in the research and development, production, sales and application expansion of metal appearance composite materials, mainly including film-faced composite materials (VCM), pre-coated composite materials (PCM), etc. The company's products are mainly sold to manufacturers in the home appliance industry, including various brand manufacturers and OEM manufacturers.
77GF Score
Get the complete analysis for BJSE:920768
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BJSE:920768 has been successfully added to your 
