The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Thai Plastic Industrial (1994) PCL's Dividend Payout Ratio for the
months ended in Mar. 2026 was 0.00.
The historical rank and industry rank for Thai Plastic Industrial (1994) PCL's Dividend Payout Ratio or its related term are showing as below:
BKK:TPLAS'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.68 Med: 0.85 Max: 1.89
Current: 0.68
During the past 11 years, the highest Dividend Payout Ratio of Thai Plastic Industrial (1994) PCL was 1.89. The lowest was 0.68. And the median was 0.85.
BKK:TPLAS's Dividend Payout Ratio is ranked worse than 75.36% of 211
companies
in the Packaging & Containers industry
Industry Median: 0.39
vs BKK:TPLAS: 0.68
During the past 11 years, the highest Trailing Annual Dividend Yield of Thai Plastic Industrial (1994) PCL was 10.99%. The lowest was 1.98%. And the median was 4.27%.
During the past 3 years, the average Dividends Per Share Growth Rate was -26.30% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was -18.90% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Thai Plastic Industrial (1994) PCL (BKK:TPLAS) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Thai Plastic Industrial (1994) PCL Dividend Payout Ratio Related Terms
Thai Plastic Industrial (1994) PCL Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Thai Plastic Industrial (1994) PCL Dividend Payout Ratio Chart
BKK:TPLAS vs SW, PKG, IP: Dividend Payout Ratio Comparison
For the Packaging & Containers subindustry, Thai Plastic Industrial (1994) PCL's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Thai Plastic Industrial (1994) PCL Dividend Payout Ratio vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Thai Plastic Industrial (1994) PCL's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Thai Plastic Industrial (1994) PCL's Dividend Payout Ratio falls into.
Thai Plastic Industrial (1994) PCL Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Thai Plastic Industrial (1994) PCL (BKK:TPLAS) has a Dividend Payout Ratio of 0.00 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Thai Plastic Industrial (1994) PCL and its competitors. Over the past decade, Thai Plastic Industrial (1994) PCL's Dividend Payout Ratio has ranged from 0.68 to 1.89. According to the industry distribution chart, Thai Plastic Industrial (1994) PCL ranks #159 out of 211 companies in the Packaging & Containers industry, placing it in the top 75.4%.
Is Thai Plastic Industrial (1994) PCL's Dividend Payout Ratio too high?
Thai Plastic Industrial (1994) PCL's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.68 to a high of 1.89. Based on the distribution chart, Thai Plastic Industrial (1994) PCL ranks #159 out of 211 companies in the Packaging & Containers industry, which is in the bottom quartile relative to peers. Overall, Thai Plastic Industrial (1994) PCL has a GF Score™ of 78/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Thai Plastic Industrial (1994) PCL's Dividend Payout Ratio compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Thai Plastic Industrial (1994) PCL ranks #159 out of 211 companies for Dividend Payout Ratio. This places Thai Plastic Industrial (1994) PCL in the lower half of its industry. The industry median Dividend Payout Ratio is 0.39. Historically, Thai Plastic Industrial (1994) PCL's own Dividend Payout Ratio has ranged from 0.68 to 1.89 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Packaging & Containers company?
The median Dividend Payout Ratio among Packaging & Containers companies is 0.39, based on 211 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Thai Plastic Industrial (1994) PCL and its competitors. For the Packaging & Containers industry, the median Dividend Payout Ratio is 0.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Thai Plastic Industrial (1994) PCL's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Thai Plastic Industrial (1994) PCL stock overvalued right now?
Based on GuruFocus' analysis, Thai Plastic Industrial (1994) PCL (BKK:TPLAS) is currently considered Fairly Valued. The stock's GF Value™ is ฿1.12, compared to a current price of ฿1.07 — trading 4.5% below its estimated fair value. The current Dividend Payout Ratio is 0.00. Thai Plastic Industrial (1994) PCL's overall GF Score™ is 78/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Thai Plastic Industrial (1994) PCL (BKK:TPLAS), the current Dividend Payout Ratio is 0.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Thai Plastic Industrial (1994) PCL (BKK:TPLAS) Overvalued in 2026?
Based on GuruFocus' analysis, Thai Plastic Industrial (1994) PCL stock appears to be undervalued.
The current stock price of ฿1.07 is trading 4.5% below its estimated GF Value™ of ฿1.12.
GuruFocus considers Thai Plastic Industrial (1994) PCL to be Fairly Valued.
Key valuation signals for BKK:TPLAS:
Dividend Payout Ratio: 0.00
GF Value™: ฿1.12 vs. price of ฿1.07 (4.5% below fair value)
No single metric tells the full story. See the BKK:TPLAS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Thai Plastic Industrial (1994) PCL Business Description
Thai Plastic Industrial (1994) PCL is engaged in the manufacturing of food plastic bags, food plastic wrappers and food paper containers. Its products include High Density Polyethylene, POLY - PROPYLENE, Thin T-Shirt Bag, LL T-Shirt Bag, PP T-Shirt Bag, LL Beverage Bag, Flexible Straws, LDPE Clear Cold Storage bags, Food Containers beat box, Bowl Food Containers beat box, Thick T-Shirt Bag, PP Bag Side folding type, and POLY - VINYI CHLORIDE. It operates in single segment of manufacturing food plastic bags, food plastic wrappers and food paper containers and sell the products in Thailand.
78GF Score
Get the complete analysis for BKK:TPLAS
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:TPLAS has been successfully added to your 
