Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Magna Electro Castings's Dividend Payout Ratio for the
months ended in Mar. 2026 was 0.00.
The historical rank and industry rank for Magna Electro Castings's Dividend Payout Ratio or its related term are showing as below:
BOM:517449'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.07 Med: 0.09 Max: 0.34
Current: 0.14
During the past 13 years, the highest Dividend Payout Ratio of Magna Electro Castings was 0.34. The lowest was 0.07. And the median was 0.09.
BOM:517449's Dividend Payout Ratio is ranked better than 86.59% of 1723
companies
in the Industrial Products industry
Industry Median: 0.37
vs BOM:517449: 0.14
During the past 13 years, the highest Trailing Annual Dividend Yield of Magna Electro Castings was 4.78%. The lowest was 0.34%. And the median was 0.87%.
During the past 12 months, Magna Electro Castings's average Dividends Per Share Growth Rate was 20.00% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 33.90% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Magna Electro Castings was 49.40% per year. The lowest was -20.60% per year. And the median was 3.60% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Magna Electro Castings (BOM:517449) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Magna Electro Castings Dividend Payout Ratio Related Terms
Magna Electro Castings Dividend Payout Ratio Historical Data
* Premium members only.
The historical data trend for Magna Electro Castings's Dividend Payout Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Magna Electro Castings Dividend Payout Ratio Chart
BOM:517449 vs CRS, ATI, MLI: Dividend Payout Ratio Comparison
For the Metal Fabrication subindustry, Magna Electro Castings's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Magna Electro Castings Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Magna Electro Castings's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Magna Electro Castings's Dividend Payout Ratio falls into.
Magna Electro Castings Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Magna Electro Castings's Dividend Payout Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Magna Electro Castings (BOM:517449) has a Dividend Payout Ratio of 0.00 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Magna Electro Castings and its competitors. Over the past decade, Magna Electro Castings' Dividend Payout Ratio has ranged from 0.07 to 0.34. According to the industry distribution chart, Magna Electro Castings ranks #231 out of 1723 companies in the Industrial Products industry, placing it in the top 13.4%.
Is Magna Electro Castings' Dividend Payout Ratio too high?
Magna Electro Castings' current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.07 to a high of 0.34. Based on the distribution chart, Magna Electro Castings ranks #231 out of 1723 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Magna Electro Castings has a GF Score™ of 79/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Magna Electro Castings' Dividend Payout Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Magna Electro Castings ranks #231 out of 1723 companies for Dividend Payout Ratio. This places Magna Electro Castings in the top 13% of its industry — outperforming the majority of peers. The industry median Dividend Payout Ratio is 0.37. Historically, Magna Electro Castings' own Dividend Payout Ratio has ranged from 0.07 to 0.34 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,723 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Magna Electro Castings and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Magna Electro Castings's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Magna Electro Castings stock overvalued right now?
Based on GuruFocus' analysis, Magna Electro Castings (BOM:517449) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹963.54, compared to a current price of ₹1,149.20 — trading 19.3% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Magna Electro Castings' overall GF Score™ is 79/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Magna Electro Castings (BOM:517449), the current Dividend Payout Ratio is 0.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Magna Electro Castings (BOM:517449) Overvalued in 2026?
Based on GuruFocus' analysis, Magna Electro Castings stock appears to be overvalued.
The current stock price of ₹1,149.20 is trading 19.3% above its estimated GF Value™ of ₹963.54.
GuruFocus considers Magna Electro Castings to be Modestly Overvalued.
Key valuation signals for BOM:517449:
Dividend Payout Ratio: 0.00
GF Value™: ₹963.54 vs. price of ₹1,149.20 (19.3% above fair value)
No single metric tells the full story. See the BOM:517449 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Magna Electro Castings Ltd is engaged in manufacturing and supplying ferrous components in small and medium volumes. The company specializes in the manufacture of Ductile Iron and Gray Iron castings including Grey Iron, SG (spheroidal graphite) iron, and other iron alloy castings-machined and unmachined steel components. The company also produces fully machined components. The company has the following divisions; the Foundry division; the Wind Energy Generation division; and the Solar Energy division. The company earns the majority of its revenue from the Foundry division.
79GF Score
Get the complete analysis for BOM:517449
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:517449 has been successfully added to your 
