Mitsui High-tec (FSE:6966) Dividend Payout Ratio: 0.00 (As of Jan. 2026)

What is Mitsui High-tec Dividend Payout Ratio?

Mitsui High-tec FSE:6966 86 Dividend Payout Ratio is 0.00 as of Jan. 2026. GuruFocus rates FSE:6966 with a GF Score™ of 86/100 and a GF Value™ of 円646.22. The stock has 8 warning signs investors should review. Among 452 Semiconductors companies, Mitsui High-tec ranks better than 59.96% on this metric.

The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Mitsui High-tec's Dividend Payout Ratio for the months ended in Jan. 2026 was 0.00.

The historical rank and industry rank for Mitsui High-tec's Dividend Payout Ratio or its related term are showing as below:

FSE:6966' s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.07 Med: 0.23 Max: 0.84
Current: 0.3

During the past 13 years, the highest Dividend Payout Ratio of Mitsui High-tec was 0.84. The lowest was 0.07. And the median was 0.23.

FSE:6966's Dividend Payout Ratio is ranked better than
59.96% of 452 companies
in the Semiconductors industry
Industry Median: 0.395 vs FSE:6966: 0.30

As of today (2026-07-05), the Dividend Yield % of Mitsui High-tec is 0.00%.

During the past 13 years, the highest Trailing Annual Dividend Yield of Mitsui High-tec was 3.05%. The lowest was 0.09%. And the median was 0.85%.

Mitsui High-tec's Dividends per Share for the months ended in Jan. 2026 was 円12.00.

During the past 12 months, Mitsui High-tec's average Dividends Per Share Growth Rate was 2.30% per year. During the past 3 years, the average Dividends Per Share Growth Rate was 11.50% per year. During the past 5 years, the average Dividends Per Share Growth Rate was 51.80% per year. During the past 10 years, the average Dividends Per Share Growth Rate was 31.40% per year.

During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Mitsui High-tec was 128.90% per year. The lowest was -48.20% per year. And the median was 9.10% per year.

The growth rate is calculated with least square regression.

For more information regarding to dividend, please check our Dividend Page.

* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.

Mitsui High-tec (FSE:6966) Dividend Payout Ratio Explanation

In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.

Mitsui High-tec Dividend Payout Ratio Related Terms

Mitsui High-tec Dividend Payout Ratio Historical Data

* Premium members only.

The historical data trend for Mitsui High-tec's Dividend Payout Ratio can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Mitsui High-tec Dividend Payout Ratio Chart

Mitsui High-tec Annual Data

Trend

Jan17

Jan18

Jan19

Jan20

Jan21

Jan22

Jan23

Jan24

Jan25

Jan26

Dividend Payout Ratio

Get a 7-Day Free Trial

0.19

0.13

0.15

0.26

0.45

Mitsui High-tec Quarterly Data
	Jul21	Oct21	Jan22	Apr22	Jul22	Oct22	Jan23	Apr23	Jul23	Oct23	Jan24	Apr24	Jul24	Oct24	Jan25	Apr25	Jul25	Oct25	Jan26	Apr26
Dividend Payout Ratio	Get a 7-Day Free Trial															0.00	0.33	0.00	0.00	0.00

FSE:6966 vs NVDA, AVGO, MU: Dividend Payout Ratio Comparison

For the Semiconductors subindustry, Mitsui High-tec's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Mitsui High-tec Dividend Payout Ratio vs Semiconductors Industry

For the Semiconductors industry and Technology sector, Mitsui High-tec's Dividend Payout Ratio distribution charts can be found below:

* The bar in red indicates where Mitsui High-tec's Dividend Payout Ratio falls into.

Save Embed

86GF Score

Mitsui High-tec Inc FSE:6966

Dividend Payout Ratio is just one metric. See GF Score™, valuation, warning signs, and more.

View Full Analysis

Mitsui High-tec Dividend Payout Ratio Calculation

Mitsui High-tec's Dividend Payout Ratio for the fiscal year that ended in Jan. 2026 is calculated as

Dividend Payout Ratio	=	Dividends per Share (A: Jan. 2026 )	/	EPS without NRI (A: Jan. 2026 )
	=	18	/	40.416
	=	0.45

Mitsui High-tec's Dividend Payout Ratio for the quarter that ended in Jan. 2026 is calculated as

Dividend Payout Ratio	=	Dividends per Share (Q: Jan. 2026 )	/	EPS without NRI (Q: Jan. 2026 )
	=	12	/	-0.261
	=	N/A

Frequently Asked Questions Learn more about Dividend Payout Ratio →

What does a Dividend Payout Ratio of 0.00 mean?

Mitsui High-tec (FSE:6966) has a Dividend Payout Ratio of 0.00 as of Jan. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Mitsui High-tec and its competitors. Over the past decade, Mitsui High-tec's Dividend Payout Ratio has ranged from 0.07 to 0.84. According to the industry distribution chart, Mitsui High-tec ranks #181 out of 452 companies in the Semiconductors industry, placing it in the top 40%.

Is Mitsui High-tec's Dividend Payout Ratio too high?

Mitsui High-tec's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.07 to a high of 0.84. Based on the distribution chart, Mitsui High-tec ranks #181 out of 452 companies in the Semiconductors industry, which is above the industry midpoint. Overall, Mitsui High-tec has a GF Score™ of 86/100, reflecting its overall financial health beyond just this single metric.

How does Mitsui High-tec's Dividend Payout Ratio compare to NVDA and AVGO?

According to the Semiconductors industry distribution chart, Mitsui High-tec ranks #181 out of 452 companies for Dividend Payout Ratio. This puts Mitsui High-tec in the upper half of its industry. The industry median Dividend Payout Ratio is 0.40. Historically, Mitsui High-tec's own Dividend Payout Ratio has ranged from 0.07 to 0.84 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.

What is a good Dividend Payout Ratio for a Semiconductors company?

The median Dividend Payout Ratio among Semiconductors companies is 0.40, based on 452 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.

What does a high Dividend Payout Ratio mean?

A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Mitsui High-tec and its competitors. For the Semiconductors industry, the median Dividend Payout Ratio is 0.40 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mitsui High-tec's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.

Is Mitsui High-tec stock overvalued right now?

Mitsui High-tec (FSE:6966) has a current Dividend Payout Ratio of 0.00. The stock's GF Value™ is 円646.22, compared to a current price of 円758.00 — trading 17.3% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Mitsui High-tec's overall GF Score™ is 86/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.

How is Dividend Payout Ratio calculated?

Dividend Payout Ratio is calculated from a company's financial statements. For Mitsui High-tec (FSE:6966), the current Dividend Payout Ratio is 0.00 as of Jan. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Mitsui High-tec (FSE:6966) Overvalued in 2026?

Based on GuruFocus' analysis, Mitsui High-tec stock appears to be overvalued. The current stock price of 円758.00 is trading 17.3% above its estimated GF Value™ of 円646.22.

Key valuation signals for FSE:6966:

Dividend Payout Ratio: 0.00
GF Value™: 円646.22 vs. price of 円758.00 (17.3% above fair value)
GF Score™: 86/100 with 8 warning signs

No single metric tells the full story. See the FSE:6966 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.

Mitsui High-tec Business Description

Industry Technology Semiconductors

Comparable Companies TSE:3445 TSE:6875 TSE:6707 TSE:2737 TSE:3156 TSE:6613 TSE:8084 TSE:6625 TSE:8150 TSE:6832 NVDA TPE:2330 AVGO MU XKRX:000660 AMD INTC TSE:285A TXN MRVL

Other Exchanges MHTCF:USA 6966:Japan

Address 2-10-1,Komine, Yahatanishi-ku, Kitakyushu, JPN, 807-8588

Website https://www.mitsui-high-tec.com

Mitsui High-tec Inc manufactures and sells lead frame, motor core, precision tooling and machine tools in Japan. Its precision tooling/precision parts products include motor core dies, lead frame dies, mold dies, trim and form dies, and other type of stamping tools used in motor cores and IC lead frames, electric motor cores, automobile components, coins, and resin injection molding. It also provides open lead frames for semiconductor packages; and motor parts.

86GF Score

Get the complete analysis for FSE:6966

Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

円758.00

Price

円646.22

GF Value

View FSE:6966 Analysis

See Dividend Payout Ratio data for all stocks →