Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. D&G Technology Holding Co's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.00.
The historical rank and industry rank for D&G Technology Holding Co's Dividend Payout Ratio or its related term are showing as below:
During the past 12 years, the highest Dividend Payout Ratio of D&G Technology Holding Co was 9.57. The lowest was 0.28. And the median was 4.93.
HKSE:01301's Dividend Payout Ratio is not ranked *
in the Construction industry.
Industry Median: 0.38 * Ranked among companies with meaningful Dividend Payout Ratio only.
During the past 12 years, the highest Trailing Annual Dividend Yield of D&G Technology Holding Co was 19.42%. The lowest was 0.00%. And the median was 1.73%.
D&G Technology Holding Co (HKSE:01301) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
D&G Technology Holding Co Dividend Payout Ratio Related Terms
D&G Technology Holding Co Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
D&G Technology Holding Co Dividend Payout Ratio Chart
HKSE:01301 vs PWR, FIX, EME: Dividend Payout Ratio Comparison
For the Engineering & Construction subindustry, D&G Technology Holding Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
D&G Technology Holding Co Dividend Payout Ratio vs Construction Industry
For the Construction industry and Industrials sector, D&G Technology Holding Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where D&G Technology Holding Co's Dividend Payout Ratio falls into.
D&G Technology Holding Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
D&G Technology Holding Co's Dividend Payout Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
D&G Technology Holding Co (HKSE:01301) has a Dividend Payout Ratio of 0.00 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on D&G Technology Holding Co and its competitors. Over the past decade, D&G Technology Holding Co's Dividend Payout Ratio has ranged from 0.28 to 9.57. According to the industry distribution chart, D&G Technology Holding Co ranks #999999 out of 865 companies in the Construction industry.
Is D&G Technology Holding Co's Dividend Payout Ratio too high?
D&G Technology Holding Co's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.28 to a high of 9.57. Based on the distribution chart, D&G Technology Holding Co ranks #999999 out of 865 companies in the Construction industry, which is in the bottom quartile relative to peers. Overall, D&G Technology Holding Co has a GF Score™ of 40/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does D&G Technology Holding Co's Dividend Payout Ratio compare to PWR and FIX?
According to the Construction industry distribution chart, D&G Technology Holding Co ranks #999999 out of 865 companies for Dividend Payout Ratio. This places D&G Technology Holding Co in the lower half of its industry. The industry median Dividend Payout Ratio is 0.38. Historically, D&G Technology Holding Co's own Dividend Payout Ratio has ranged from 0.28 to 9.57 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Construction company?
The median Dividend Payout Ratio among Construction companies is 0.38, based on 865 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on D&G Technology Holding Co and its competitors. For the Construction industry, the median Dividend Payout Ratio is 0.38 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. D&G Technology Holding Co's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is D&G Technology Holding Co stock overvalued right now?
Based on GuruFocus' analysis, D&G Technology Holding Co (HKSE:01301) is currently considered Possible Value Trap. The stock's GF Value™ is HK$1.00, compared to a current price of HK$0.30 — trading 70.5% below its estimated fair value. The current Dividend Payout Ratio is 0.00. D&G Technology Holding Co's overall GF Score™ is 40/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For D&G Technology Holding Co (HKSE:01301), the current Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is D&G Technology Holding Co (HKSE:01301) Overvalued in 2026?
Based on GuruFocus' analysis, D&G Technology Holding Co stock appears to be undervalued.
The current stock price of HK$0.30 is trading 70.5% below its estimated GF Value™ of HK$1.00.
GuruFocus considers D&G Technology Holding Co to be Possible Value Trap.
Key valuation signals for HKSE:01301:
Dividend Payout Ratio: 0.00
GF Value™: HK$1.00 vs. price of HK$0.30 (70.5% below fair value)
No single metric tells the full story. See the HKSE:01301 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
D&G Technology Holding Co Ltd is a medium-to-large-scale asphalt mixing plant manufacturer and service provider in China. Its products include conventional hot-mix asphalt mixing plants and hot-mix asphalt mixing recycling plants. Asphalt mixtures produced by the company are used in road construction and maintenance projects, including constructing and maintaining all grades of roads and highways. The company has one operating segment: sales of asphalt mixing plants, spare parts, other asphalt specialty equipment, and modified equipment. It also offers asphalt mixing plant customer services, including sales of spare parts and components, and provision of equipment modification services, and leasing of asphalt mixing plants through operating leases.
40GF Score
Get the complete analysis for HKSE:01301
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
HKSE:01301 has been successfully added to your 
