Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Atech OEMROCO:6109 +0.85%59 Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus rates ROCO:6109 with a GF Score™ of 59/100 and a GF Value™ of NT$10.02 (Modestly Overvalued). The stock has 2 warning signs investors should review. Among 1,724 Industrial Products companies, Atech OEM ranks worse than 58004.58% on this metric.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Atech OEM's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.00.
The historical rank and industry rank for Atech OEM's Dividend Payout Ratio or its related term are showing as below:
During the past 13 years, the highest Dividend Payout Ratio of Atech OEM was 31.90. The lowest was 0.39. And the median was 1.79.
ROCO:6109's Dividend Payout Ratio is not ranked *
in the Industrial Products industry.
Industry Median: 0.37 * Ranked among companies with meaningful Dividend Payout Ratio only.
During the past 12 months, Atech OEM's average Dividends Per Share Growth Rate was -100.00% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Atech OEM was -14.50% per year. The lowest was -59.50% per year. And the median was -37.00% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Atech OEM (ROCO:6109) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Atech OEM Dividend Payout Ratio Related Terms
Atech OEM Dividend Payout Ratio Historical Data
* Premium members only.
The historical data trend for Atech OEM's Dividend Payout Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:6109 vs VRT, BE: Dividend Payout Ratio Comparison
For the Electrical Equipment & Parts subindustry, Atech OEM's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Atech OEM Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Atech OEM's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Atech OEM's Dividend Payout Ratio falls into.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Atech OEM's Dividend Payout Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Atech OEM (ROCO:6109) has a Dividend Payout Ratio of 0.00 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Atech OEM and its competitors. Over the past decade, Atech OEM's Dividend Payout Ratio has ranged from 0.39 to 31.90. According to the industry distribution chart, Atech OEM ranks #999999 out of 1724 companies in the Industrial Products industry.
Is Atech OEM's Dividend Payout Ratio too high?
Atech OEM's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.39 to a high of 31.90. Based on the distribution chart, Atech OEM ranks #999999 out of 1724 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Atech OEM has a GF Score™ of 59/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Atech OEM's Dividend Payout Ratio compare to VRT and BE?
According to the Industrial Products industry distribution chart, Atech OEM ranks #999999 out of 1724 companies for Dividend Payout Ratio. This places Atech OEM in the lower half of its industry. The industry median Dividend Payout Ratio is 0.37. Historically, Atech OEM's own Dividend Payout Ratio has ranged from 0.39 to 31.90 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,724 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Atech OEM and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Atech OEM's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Atech OEM stock overvalued right now?
Based on GuruFocus' analysis, Atech OEM (ROCO:6109) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$10.02, compared to a current price of NT$11.90 — trading 18.8% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Atech OEM's overall GF Score™ is 59/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Atech OEM (ROCO:6109), the current Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Atech OEM (ROCO:6109) Overvalued in 2026?
Based on GuruFocus' analysis, Atech OEM stock appears to be overvalued.
The current stock price of NT$11.90 is trading 18.8% above its estimated GF Value™ of NT$10.02.
GuruFocus considers Atech OEM to be Modestly Overvalued.
Key valuation signals for ROCO:6109:
Dividend Payout Ratio: 0.00
GF Value™: NT$10.02 vs. price of NT$11.90 (18.8% above fair value)
No single metric tells the full story. See the ROCO:6109 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Atech OEM Inc main business is the processing, manufacturing, and trading of power supply units, power transformers for communication devices, mobile phone chargers, and wireless Bluetooth products. The company's products and services includes Power supply unit, Bluetooth wireless product, Service revenue, and Others. It has two operating segments Power segment, and Wireless segment. The company generates majority of revenue from Power segment. It has presence in Taiwan, China, U.S.A., U.K., EU, Japan, Vietnam, and Others. The company generates majority of revenue from China.
59GF Score
Get the complete analysis for ROCO:6109
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6109 has been successfully added to your 
