Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Fuji Offset Plates Manufacturing's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.00.
The historical rank and industry rank for Fuji Offset Plates Manufacturing's Dividend Payout Ratio or its related term are showing as below:
SGX:508'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.03 Med: 0.19 Max: 0.33
Current: 0.31
During the past 13 years, the highest Dividend Payout Ratio of Fuji Offset Plates Manufacturing was 0.33. The lowest was 0.03. And the median was 0.19.
SGX:508's Dividend Payout Ratio is ranked better than 60.39% of 1722
companies
in the Industrial Products industry
Industry Median: 0.37
vs SGX:508: 0.31
During the past 13 years, the highest Trailing Annual Dividend Yield of Fuji Offset Plates Manufacturing was 2.76%. The lowest was 0.60%. And the median was 0.93%.
During the past 3 years, the average Dividends Per Share Growth Rate was 18.60% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 14.00% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 5.70% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Fuji Offset Plates Manufacturing was 18.60% per year. The lowest was 0.00% per year. And the median was 0.00% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Fuji Offset Plates Manufacturing (SGX:508) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Fuji Offset Plates Manufacturing Dividend Payout Ratio Related Terms
Fuji Offset Plates Manufacturing Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Fuji Offset Plates Manufacturing Dividend Payout Ratio Chart
SGX:508 vs GEV, ETN, PH: Dividend Payout Ratio Comparison
For the Specialty Industrial Machinery subindustry, Fuji Offset Plates Manufacturing's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Fuji Offset Plates Manufacturing Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Fuji Offset Plates Manufacturing's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Fuji Offset Plates Manufacturing's Dividend Payout Ratio falls into.
Fuji Offset Plates Manufacturing Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Fuji Offset Plates Manufacturing (SGX:508) has a Dividend Payout Ratio of 0.00 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Fuji Offset Plates Manufacturing and its competitors. Over the past decade, Fuji Offset Plates Manufacturing's Dividend Payout Ratio has ranged from 0.03 to 0.33. According to the industry distribution chart, Fuji Offset Plates Manufacturing ranks #682 out of 1722 companies in the Industrial Products industry, placing it in the top 39.6%.
Is Fuji Offset Plates Manufacturing's Dividend Payout Ratio too high?
Fuji Offset Plates Manufacturing's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.03 to a high of 0.33. Based on the distribution chart, Fuji Offset Plates Manufacturing ranks #682 out of 1722 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Fuji Offset Plates Manufacturing has a GF Score™ of 38/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Fuji Offset Plates Manufacturing's Dividend Payout Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Fuji Offset Plates Manufacturing ranks #682 out of 1722 companies for Dividend Payout Ratio. This puts Fuji Offset Plates Manufacturing in the upper half of its industry. The industry median Dividend Payout Ratio is 0.37. Historically, Fuji Offset Plates Manufacturing's own Dividend Payout Ratio has ranged from 0.03 to 0.33 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,722 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Fuji Offset Plates Manufacturing and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Fuji Offset Plates Manufacturing's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Fuji Offset Plates Manufacturing stock overvalued right now?
Based on GuruFocus' analysis, Fuji Offset Plates Manufacturing (SGX:508) is currently considered Significantly Overvalued. The stock's GF Value™ is S$0.22, compared to a current price of S$0.67 — trading 204.5% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Fuji Offset Plates Manufacturing's overall GF Score™ is 38/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Fuji Offset Plates Manufacturing (SGX:508), the current Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Fuji Offset Plates Manufacturing (SGX:508) Overvalued in 2026?
Based on GuruFocus' analysis, Fuji Offset Plates Manufacturing stock appears to be overvalued.
The current stock price of S$0.67 is trading 204.5% above its estimated GF Value™ of S$0.22.
GuruFocus considers Fuji Offset Plates Manufacturing to be Significantly Overvalued.
Key valuation signals for SGX:508:
Dividend Payout Ratio: 0.00
GF Value™: S$0.22 vs. price of S$0.67 (204.5% above fair value)
No single metric tells the full story. See the SGX:508 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Fuji Offset Plates Manufacturing Business Description
Fuji Offset Plates Manufacturing Ltd is engaged in the manufacture and sale of gravure printing cylinders, related services in the printing industry, investments in commercial, industrial, hospitality, residential, or mixed development properties, and investment holding. The company's reportable operating segments are: Printing cylinders, which generate the key revenue, Investment in property development companies. and Investment holding. Geographically, the company derives a majority of its revenue from Malaysia and the rest from Singapore and other countries.
38GF Score
Get the complete analysis for SGX:508
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SGX:508 has been successfully added to your 
